snmpPollLastContact

DLM-MIB · .1.3.6.1.4.1.52.4.2.1.1.1.11

MIB view Table view

Object

column mandatory RFC1155-SMITimeTicks

Indicates the value of the sysUpTime when the last poll 
response was received from the polled host/device for which 
this poll entry exists.

Context

MIB: DLM-MIB
OID: .1.3.6.1.4.1.52.4.2.1.1.1.11
Type: column
Access: readonly
Status: mandatory
Parent: snmpPollEntry
Table: snmpPollTable
Siblings: 14

Syntax

RFC1155-SMITimeTicks

Source: RFC1155-SMITimeTicks
Base type: Unsigned32

Values & Constraints

Type Constraints

range: 0..4294967295

Related Objects

Sibling Objects

Object	Type	Syntax	OID
snmpPollDestination mandatory The IP address of the host/device to be polled.	column	RFC1155-SMIIpAddress	`.1.3.6.1.4.1.52.4.2.1.1.1.1`
snmpPollRequests mandatory Indicates the number of poll requests (SNMP GET REQUEST PDUs) have been issued for this poll entry.	column	RFC1155-SMICounter	`.1.3.6.1.4.1.52.4.2.1.1.1.10`
snmpPollLastAlarm mandatory Indicates the value of the sysUpTime when the last alarm was generated for this poll request entry.	column	RFC1155-SMITimeTicks	`.1.3.6.1.4.1.52.4.2.1.1.1.12`
snmpPollAlarmWait mandatory Indicates the number of seconds to wait prior to sending another alarm. This is to ensure that alarms do not flood out upon device contact lost.	column	Integer32	`.1.3.6.1.4.1.52.4.2.1.1.1.13`
snmpPollTrapCommunity mandatory The value of the community string to be used in the SNMP TRAP PDU when a trap is generated.	column	OctetString	`.1.3.6.1.4.1.52.4.2.1.1.1.14`
snmpPollProtocol mandatory Indicates the protocol to use to poll the host/device. If snmp is chosen, there must be at least one corresponding OID Table Entry or a general-failure will result. A correspond…	column	Enumeration	`.1.3.6.1.4.1.52.4.2.1.1.1.15`
snmpPollOwner mandatory The IP address of the client which created this poll request entry.	column	RFC1155-SMIIpAddress	`.1.3.6.1.4.1.52.4.2.1.1.1.2`
snmpPollCommunity mandatory The value of the community string to be used in the SNMP REQUEST PDU when actively polling. Note that this community name string should be defined for the Cabletron hub device a…	column	OctetString	`.1.3.6.1.4.1.52.4.2.1.1.1.3`
snmpPollInterval mandatory The value of the interval (in seconds) on which to poll the destination address with the OIDs defined in the OID table assigned to this poll entry. This interval defines how of…	column	Integer32	`.1.3.6.1.4.1.52.4.2.1.1.1.4`
snmpPollRetry mandatory The value of the number of times to retry a failed poll request prior to considering it a failure.	column	Integer32	`.1.3.6.1.4.1.52.4.2.1.1.1.5`
snmpPollAction mandatory The indication of the action to take when a poll request is considered to have failed. A value of 'no-action' will allow the poll to reset and retry without sending any alarms. …	column	Enumeration	`.1.3.6.1.4.1.52.4.2.1.1.1.6`
snmpPollTrapAddress mandatory The IP address to which to send the SNMP TRAP if the poll is considered a failure and the action is defined as send-trap. The default trap address is the owner address for this e…	column	RFC1155-SMIIpAddress	`.1.3.6.1.4.1.52.4.2.1.1.1.7`
snmpPollType mandatory The administrative control of this poll request entry. This leaf is used to trigure an active request (begin polling), suspend polling (stop polling but leave this poll entry i…	column	Enumeration	`.1.3.6.1.4.1.52.4.2.1.1.1.8`
snmpPollStatus mandatory The operational status of this poll request entry. This leaf is used to indicate the state of the last valid poll request.	column	Enumeration	`.1.3.6.1.4.1.52.4.2.1.1.1.9`