aclL3v6ExtRuleICMPv6MessageCode
DLINK-DXS-1210-16TC-AX-MIB ·
.1.3.6.1.4.1.171.10.139.4.1.7.1.6.1.1.15
Object
column
r/w
Integer32
The message code to be checked against the packet. If the
packet matches with the message code, then the packet will
be dropped / allowed based on the action set in aclL3RuleAction.
The default value is '-1', which means the rule don't care this
condition.
Some ICMP message codes are :
networkUnreachable(0),
hostUnreachable(1),
protocolUnreachable(2),
portUnreachable(3),
fragmentNeed(4),
sourceRouteFail(5),
destNetworkUnknown(6),
destHostUnknown(7),
srcHostIsolated(8),
destNetworkAdminProhibited(9),
destHostAdminProhibited(10),
networkUnreachableTOS(11),
hostUnreachableTOS(12),
Context
- MIB
- DLINK-DXS-1210-16TC-AX-MIB
- OID
.1.3.6.1.4.1.171.10.139.4.1.7.1.6.1.1.15- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- aclL3v6ExtRuleEntry
- Table
- aclL3v6ExtRuleTable
- Siblings
- 29
Syntax
Integer32
Values & Constraints
Object Constraints
range: -1-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| aclL3v6ExtRuleProfileNo The Profile ID which this rule join. | column | Integer32 | .1.3.6.1.4.1.171.10.139.4.1.7.1.6.1.1.1 |
| aclL3v6ExtRuleTcpUdpSrcOperator The type of UDP/TCP port operator indicates how a packet's
TCP/UDP source or destination port number is compared.
none(1) - No comparison.
eq (2)- equal
gt (3)- greater than.
lt (… | column | Enumeration | .1.3.6.1.4.1.171.10.139.4.1.7.1.6.1.1.10 |
| aclL3v6ExtRuleTcpUdpSrcPort The TCP / UDP source port. The default value is -1,
which means the rule don't care this condition. | column | Integer32 | .1.3.6.1.4.1.171.10.139.4.1.7.1.6.1.1.11 |
| aclL3v6ExtRuleTcpUdpMinSrcPort The minimum port in the source port range. | column | Unsigned32 | .1.3.6.1.4.1.171.10.139.4.1.7.1.6.1.1.12 |
| aclL3v6ExtRuleTcpUdpMaxSrcPort The maximum port in the source port range. | column | Unsigned32 | .1.3.6.1.4.1.171.10.139.4.1.7.1.6.1.1.13 |
| aclL3v6ExtRuleICMPv6MessageType The message type to be checked against the packet. If the
message type matches with the packet, then the packet will be
dropped / allowed based on the action set in aclL3RuleActio… | column | Integer32 | .1.3.6.1.4.1.171.10.139.4.1.7.1.6.1.1.14 |
| aclL3v6ExtRuleDstIpv6Addr Destination IPv6 address to be matched with the packet. | column | Ipv6Address | .1.3.6.1.4.1.171.10.139.4.1.7.1.6.1.1.16 |
| aclL3v6ExtRuleSrcIpv6Addr Source IPv6 address to be matched with the packet. | column | Ipv6Address | .1.3.6.1.4.1.171.10.139.4.1.7.1.6.1.1.17 |
| aclL3v6ExtRuleDstIpv6AddrPrefixLen The prefix length for Destination IPv6 address. | column | InetAddressPrefixLength | .1.3.6.1.4.1.171.10.139.4.1.7.1.6.1.1.18 |
| aclL3v6ExtRuleSrcIpv6AddrPrefixLen The prefix length for Source IPv6 address. | column | InetAddressPrefixLength | .1.3.6.1.4.1.171.10.139.4.1.7.1.6.1.1.19 |
| aclL3v6ExtRuleAccessID L3 Filter rule ID. | column | Integer32 | .1.3.6.1.4.1.171.10.139.4.1.7.1.6.1.1.2 |
| aclL3v6ExtRuleTcpAckBit The TCP ACK bit to be checked against the packet. The default
value is 'donotcare'(3), which means the rule don't care this
condition. | column | Enumeration | .1.3.6.1.4.1.171.10.139.4.1.7.1.6.1.1.20 |
| aclL3v6ExtRuleTcpRstBit The TCP RST bit to be checked against the packet. The default
value is 'donotcare'(3), which means the rule don't care this
condition. | column | Enumeration | .1.3.6.1.4.1.171.10.139.4.1.7.1.6.1.1.21 |
| aclL3v6ExtRuleTcpUrgBit The TCP Urg bit to be checked against the packet. The default
value is 'donotcare'(3), which means the rule don't care this
condition. | column | Enumeration | .1.3.6.1.4.1.171.10.139.4.1.7.1.6.1.1.22 |
| aclL3v6ExtRuleTcpPshBit The TCP Psh bit to be checked against the packet. The default
value is 'donotcare'(3). which means the rule don't care this
condition. | column | Enumeration | .1.3.6.1.4.1.171.10.139.4.1.7.1.6.1.1.23 |
| aclL3v6ExtRuleTcpSynBit The TCP Syn bit to be checked against the packet. The default
value is 'donotcare'(3), which means the rule don't care this condition. | column | Enumeration | .1.3.6.1.4.1.171.10.139.4.1.7.1.6.1.1.24 |
| aclL3v6ExtRuleTcpFinBit The TCP Fin bit to be checked against the packet. The default
value is 'donotcare'(3), which means the rule don't care this
condition. | column | Enumeration | .1.3.6.1.4.1.171.10.139.4.1.7.1.6.1.1.25 |
| aclL3v6ExtRuleFlowLabel The flow identifier in an IPv6 header. | column | Integer32 | .1.3.6.1.4.1.171.10.139.4.1.7.1.6.1.1.26 |
| aclL3v6ExtRuleAction Specifies the action to be taken on the packet if the filter
rule matches. | column | Enumeration | .1.3.6.1.4.1.171.10.139.4.1.7.1.6.1.1.27 |
| aclL3v6ExtRuleTimeRange An administratively assigned string, which may be used
to identify the Profile. | column | OctetString | .1.3.6.1.4.1.171.10.139.4.1.7.1.6.1.1.28 |
| aclL3v6ExtRuleMatchCount Number of times this filter is matched. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.171.10.139.4.1.7.1.6.1.1.29 |
| aclL3v6ExtRuleDscp The IP Dscp value to be checked against the packet.
A default value is '-1', which means the rule don't
care this condition. | column | Integer32 | .1.3.6.1.4.1.171.10.139.4.1.7.1.6.1.1.3 |
| aclL3v6ExtRuleStatus This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of th… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.171.10.139.4.1.7.1.6.1.1.30 |
| aclL3v6ExtRuleProtocol The type of protocol to be checked against the packet. | column | Integer32 | .1.3.6.1.4.1.171.10.139.4.1.7.1.6.1.1.4 |
| aclL3v6ExtRuleFragments | column | Enumeration | .1.3.6.1.4.1.171.10.139.4.1.7.1.6.1.1.5 |
| aclL3v6ExtRuleTcpUdpDstOperator The type of UDP/TCP port operator indicates how a packet's
TCP/UDP source or destination port number is compared.
none(1) - No comparison.
eq (2)- equal
gt (3)- greater than.
lt (… | column | Enumeration | .1.3.6.1.4.1.171.10.139.4.1.7.1.6.1.1.6 |
| aclL3v6ExtRuleTcpUdpDstPort The TCP / UDP destination port. The default value is -1,
which means the rule don't care this condition. | column | Integer32 | .1.3.6.1.4.1.171.10.139.4.1.7.1.6.1.1.7 |
| aclL3v6ExtRuleTcpUdpMinDstPort The minimum port in the destination port range. | column | Unsigned32 | .1.3.6.1.4.1.171.10.139.4.1.7.1.6.1.1.8 |
| aclL3v6ExtRuleTcpUdpMaxDstPort The maximum port in the destination port range. | column | Unsigned32 | .1.3.6.1.4.1.171.10.139.4.1.7.1.6.1.1.9 |