aclExpertExtRuleDstMacAddr

DLINK-DXS-1210-16TC-AX-MIB · .1.3.6.1.4.1.171.10.139.4.1.7.1.7.1.1.28
MIB view Table view

Object

column r/w SNMPv2-TCMacAddress 
Destination MAC address to be matched with the packet. By Default, the
Destination Mac Address will be zero,which means the rule don't care this
condition.

Context

MIB
DLINK-DXS-1210-16TC-AX-MIB
OID
.1.3.6.1.4.1.171.10.139.4.1.7.1.7.1.1.28
Type
column
Access
readwrite
Status
current
Parent
aclExpertExtRuleEntry
Table
aclExpertExtRuleTable
Siblings
36

Syntax

SNMPv2-TCMacAddress
Source
SNMPv2-TCMacAddress
Base type
OctetString

Values & Constraints

Type Constraints
range: 6

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
aclExpertExtRuleProfileNo
The Profile ID which this rule join.
columnInteger32.1.3.6.1.4.1.171.10.139.4.1.7.1.7.1.1.1
aclExpertExtRuleSrcIpAddrMask
The IP subnet mask for Source IP address.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.171.10.139.4.1.7.1.7.1.1.10
aclExpertExtRuleTcpUdpDstOperator
The type of UDP/TCP port operator indicates how a packet's TCP/UDP source or destination port number is compared. none(1) - No comparison. eq (2)- equal gt (3)- greater than. lt (…
columnEnumeration.1.3.6.1.4.1.171.10.139.4.1.7.1.7.1.1.11
aclExpertExtRuleTcpUdpDstPort
The TCP / UDP destination port. The default value is -1, which means the rule don't care this condition.
columnInteger32.1.3.6.1.4.1.171.10.139.4.1.7.1.7.1.1.12
aclExpertExtRuleTcpUdpMinDstPort
The minimum port in the destination port range.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.171.10.139.4.1.7.1.7.1.1.13
aclExpertExtRuleTcpUdpMaxDstPort
The maximum port in the destination port range.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.171.10.139.4.1.7.1.7.1.1.14
aclExpertExtRuleTcpUdpSrcOperator
The type of UDP/TCP port operator indicates how a packet's TCP/UDP source or destination port number is compared. none(1) - No comparison. eq (2)- equal gt (3)- greater than. lt (…
columnEnumeration.1.3.6.1.4.1.171.10.139.4.1.7.1.7.1.1.15
aclExpertExtRuleTcpUdpSrcPort
The TCP / UDP source port. The default value is -1, which means the rule don't care this condition.
columnInteger32.1.3.6.1.4.1.171.10.139.4.1.7.1.7.1.1.16
aclExpertExtRuleTcpUdpMinSrcPort
The minimum port in the source port range.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.171.10.139.4.1.7.1.7.1.1.17
aclExpertExtRuleTcpUdpMaxSrcPort
The maximum port in the source port range.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.171.10.139.4.1.7.1.7.1.1.18
aclExpertExtRuleIPPrecedencecolumnInteger32.1.3.6.1.4.1.171.10.139.4.1.7.1.7.1.1.19
aclExpertExtRuleAccessID
L3 Filter rule ID.
columnInteger32.1.3.6.1.4.1.171.10.139.4.1.7.1.7.1.1.2
aclExpertExtRuleDscp
The IP Dscp value to be checked against the packet. A default value is '-1', which means the rule don't care this condition. The aclL3RuleTos should be specified as dscp.
columnInteger32.1.3.6.1.4.1.171.10.139.4.1.7.1.7.1.1.20
aclExpertExtRuleToS
The ToS value to be checked against the packet. A default value is '-1', which means the rule don't care this condition. The cmAclL3RuleTos should be specified as dscp.
columnInteger32.1.3.6.1.4.1.171.10.139.4.1.7.1.7.1.1.21
aclExpertExtRuleTcpAckBit
The TCP ACK bit to be checked against the packet. The default value is 'donotcare'(3), which means the rule don't care this condition.
columnEnumeration.1.3.6.1.4.1.171.10.139.4.1.7.1.7.1.1.22
aclExpertExtRuleTcpRstBit
The TCP RST bit to be checked against the packet. The default value is 'donotcare'(3), which means the rule don't care this condition.
columnEnumeration.1.3.6.1.4.1.171.10.139.4.1.7.1.7.1.1.23
aclExpertExtRuleTcpUrgBit
The TCP Urg bit to be checked against the packet. The default value is 'donotcare'(3), which means the rule don't care this condition.
columnEnumeration.1.3.6.1.4.1.171.10.139.4.1.7.1.7.1.1.24
aclExpertExtRuleTcpPshBit
The TCP Psh bit to be checked against the packet. The default value is 'donotcare'(3). which means the rule don't care this condition.
columnEnumeration.1.3.6.1.4.1.171.10.139.4.1.7.1.7.1.1.25
aclExpertExtRuleTcpSynBit
The TCP Syn bit to be checked against the packet. The default value is 'donotcare'(3), which means the rule don't care this condition.
columnEnumeration.1.3.6.1.4.1.171.10.139.4.1.7.1.7.1.1.26
aclExpertExtRuleTcpFinBit
The TCP Fin bit to be checked against the packet. The default value is 'donotcare'(3), which means the rule don't care this condition.
columnEnumeration.1.3.6.1.4.1.171.10.139.4.1.7.1.7.1.1.27
aclExpertExtRuleSrcMacAddr
Source MAC address to be matched with the packet. By Default, the Source Mac Address will be zero, which means the rule don't care this condition.. address
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.171.10.139.4.1.7.1.7.1.1.29
aclExpertExtRuleProtocol
The type of protocol to be checked against the packet.
columnEnumeration.1.3.6.1.4.1.171.10.139.4.1.7.1.7.1.1.3
aclExpertExtRuleVlanId
Vlan Id to be filtered. In case of Provider bridges, This Vlan Id will be treated as customer Vlan Id. By Default, the value will be '-1', which means the rule don't care this con…
columnInteger32.1.3.6.1.4.1.171.10.139.4.1.7.1.7.1.1.30
aclExpertExtRule1pPriority
802.1p priority to be matched with the packet. By Default, the value will be '-1', which means the rule don't care this condition.
columnInteger32.1.3.6.1.4.1.171.10.139.4.1.7.1.7.1.1.31
aclExpertExtRuleDstMacAddrMask
The MAC address Mask work for Destination MAC address.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.171.10.139.4.1.7.1.7.1.1.32
aclExpertExtRuleSrcMacAddrMask
The MAC address Mask work for Source MAC address.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.171.10.139.4.1.7.1.7.1.1.33
aclExpertExtRuleAction
Specifies the action to be taken on the packet if the filter rule matches.
columnEnumeration.1.3.6.1.4.1.171.10.139.4.1.7.1.7.1.1.34
aclExpertExtRuleTimeRange
An administratively assigned string, which may be used to identify the Profile.
columnOctetString.1.3.6.1.4.1.171.10.139.4.1.7.1.7.1.1.35
aclExpertExtRuleMatchCount
Number of times this filter is matched.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.171.10.139.4.1.7.1.7.1.1.36
aclExpertExtRuleStatus
This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of th…
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.171.10.139.4.1.7.1.7.1.1.37
aclExpertExtRuleFragmentscolumnEnumeration.1.3.6.1.4.1.171.10.139.4.1.7.1.7.1.1.4
aclExpertExtRuleICMPMessageType
The message type to be checked against the packet. If the message type matches with the packet, then the packet will be dropped / allowed based on the action set in aclL3RuleActio…
columnInteger32.1.3.6.1.4.1.171.10.139.4.1.7.1.7.1.1.5
aclExpertExtRuleICMPMessageCode
The message code to be checked against the packet. If the packet matches with the message code, then the packet will be dropped / allowed based on the action set in aclL3RuleActio…
columnInteger32.1.3.6.1.4.1.171.10.139.4.1.7.1.7.1.1.6
aclExpertExtRuleDstIpAddr
Destination IP address to be matched with the packet. The default value will be zero, which means the rule don't care this condition.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.171.10.139.4.1.7.1.7.1.1.7
aclExpertExtRuleSrcIpAddr
Source IP address to be matched with the packet. The default value will be zero, which means the rule don't care this condition.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.171.10.139.4.1.7.1.7.1.1.8
aclExpertExtRuleDstIpAddrMask
The IP subnet mask for Destination IP address.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.171.10.139.4.1.7.1.7.1.1.9