aclL3v4ExtRuleTcpRstBit
DLINK-DXS-1210-12SC-AX-MIB ·
.1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.23
Object
column
r/w
Enumeration
The TCP RST bit to be checked against the packet. The default value is 'donotcare'(3), which means the rule don't care this condition.
Context
- MIB
- DLINK-DXS-1210-12SC-AX-MIB
- OID
.1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.23- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- aclL3v4ExtRuleEntry
- Table
- aclL3v4ExtRuleTable
- Siblings
- 30
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | establish |
2 | notEstablish |
3 | donotcare |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| aclL3v4ExtRuleProfileNo The Profile ID which this rule join. | column | Integer32 | .1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.1 |
| aclL3v4ExtRuleSrcIpAddrMask The IP subnet mask for Source IP address. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.10 |
| aclL3v4ExtRuleTcpUdpDstOperator The type of UDP/TCP port operator indicates how a packet's
TCP/UDP source or destination port number is compared.
none(1) - No comparison.
eq (2)- equal
gt (3)- greater than.
lt (… | column | Enumeration | .1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.11 |
| aclL3v4ExtRuleTcpUdpDstPort The TCP / UDP destination port. The default value is -1,
which means the rule don't care this condition. | column | Integer32 | .1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.12 |
| aclL3v4ExtRuleTcpUdpMinDstPort The minimum port in the destination port range. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.13 |
| aclL3v4ExtRuleTcpUdpMaxDstPort The maximum port in the destination port range. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.14 |
| aclL3v4ExtRuleTcpUdpSrcOperator The type of UDP/TCP port operator indicates how a packet's
TCP/UDP source or destination port number is compared.
none(1) - No comparison.
eq (2)- equal
gt (3)- greater than.
lt (… | column | Enumeration | .1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.15 |
| aclL3v4ExtRuleTcpUdpSrcPort The TCP / UDP source port. The default value is -1,
which means the rule don't care this condition. | column | Integer32 | .1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.16 |
| aclL3v4ExtRuleTcpUdpMinSrcPort The minimum port in the source port range. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.17 |
| aclL3v4ExtRuleTcpUdpMaxSrcPort The maximum port in the source port range. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.18 |
| aclL3v4ExtRuleIPPrecedence | column | Integer32 | .1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.19 |
| aclL3v4ExtRuleAccessID L3 Filter rule ID. | column | Integer32 | .1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.2 |
| aclL3v4ExtRuleDscp The IP Dscp value to be checked against the packet.
A default value is '-1', which means the rule don't
care this condition.
The aclL3RuleTos should be specified as dscp. | column | Integer32 | .1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.20 |
| aclL3v4ExtRuleToS The ToS value to be checked against the packet.
A default value is '-1', which means the rule don't
care this condition.
The cmAclL3RuleTos should be specified as dscp. | column | Integer32 | .1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.21 |
| aclL3v4ExtRuleTcpAckBit The TCP ACK bit to be checked against the packet. The default
value is 'donotcare'(3), which means the rule don't care this
condition. | column | Enumeration | .1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.22 |
| aclL3v4ExtRuleTcpUrgBit The TCP Urg bit to be checked against the packet. The default
value is 'donotcare'(3), which means the rule don't care this
condition. | column | Enumeration | .1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.24 |
| aclL3v4ExtRuleTcpPshBit The TCP Psh bit to be checked against the packet. The default
value is 'donotcare'(3). which means the rule don't care this
condition. | column | Enumeration | .1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.25 |
| aclL3v4ExtRuleTcpSynBit The TCP Syn bit to be checked against the packet. The default
value is 'donotcare'(3), which means the rule don't care this condition. | column | Enumeration | .1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.26 |
| aclL3v4ExtRuleTcpFinBit The TCP Fin bit to be checked against the packet. The default
value is 'donotcare'(3), which means the rule don't care this
condition. | column | Enumeration | .1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.27 |
| aclL3v4ExtRuleAction Specifies the action to be taken on the packet if the filter
rule matches. | column | Enumeration | .1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.28 |
| aclL3v4ExtRuleTimeRange An administratively assigned string, which may be used
to identify the Profile. | column | OctetString | .1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.29 |
| aclL3v4ExtRuleProtocol The type of protocol to be checked against the packet. | column | Enumeration | .1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.3 |
| aclL3v4ExtRuleMatchCount Number of times this filter is matched. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.30 |
| aclL3v4ExtRuleStatus This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of th… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.31 |
| aclL3v4ExtRuleFragments | column | Enumeration | .1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.4 |
| aclL3v4ExtRuleICMPMessageType The message type to be checked against the packet. If the
message type matches with the packet, then the packet will be
dropped / allowed based on the action set in aclL3RuleActio… | column | Integer32 | .1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.5 |
| aclL3v4ExtRuleICMPMessageCode The message code to be checked against the packet. If the
packet matches with the message code, then the packet will
be dropped / allowed based on the action set in aclL3RuleActio… | column | Integer32 | .1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.6 |
| aclL3v4ExtRuleDstIpAddr Destination IP address to be matched with the packet.
The default value will be zero, which means the rule
don't care this condition. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.7 |
| aclL3v4ExtRuleSrcIpAddr Source IP address to be matched with the packet.
The default value will be zero, which means the
rule don't care this condition. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.8 |
| aclL3v4ExtRuleDstIpAddrMask The IP subnet mask for Destination IP address. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.9 |