aclL3v4ExtRuleAction

DLINK-DXS-1210-12SC-AX-MIB · .1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.28
MIB view Table view

Object

column r/w Enumeration 
Specifies the action to be taken on the packet if the filter
rule matches.

Context

MIB
DLINK-DXS-1210-12SC-AX-MIB
OID
.1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.28
Type
column
Access
readwrite
Status
current
Parent
aclL3v4ExtRuleEntry
Table
aclL3v4ExtRuleTable
Siblings
30

Syntax

Enumeration

Values & Constraints

Enumerated Values
1allow
2drop

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
aclL3v4ExtRuleProfileNo
The Profile ID which this rule join.
columnInteger32.1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.1
aclL3v4ExtRuleSrcIpAddrMask
The IP subnet mask for Source IP address.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.10
aclL3v4ExtRuleTcpUdpDstOperator
The type of UDP/TCP port operator indicates how a packet's TCP/UDP source or destination port number is compared. none(1) - No comparison. eq (2)- equal gt (3)- greater than. lt (…
columnEnumeration.1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.11
aclL3v4ExtRuleTcpUdpDstPort
The TCP / UDP destination port. The default value is -1, which means the rule don't care this condition.
columnInteger32.1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.12
aclL3v4ExtRuleTcpUdpMinDstPort
The minimum port in the destination port range.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.13
aclL3v4ExtRuleTcpUdpMaxDstPort
The maximum port in the destination port range.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.14
aclL3v4ExtRuleTcpUdpSrcOperator
The type of UDP/TCP port operator indicates how a packet's TCP/UDP source or destination port number is compared. none(1) - No comparison. eq (2)- equal gt (3)- greater than. lt (…
columnEnumeration.1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.15
aclL3v4ExtRuleTcpUdpSrcPort
The TCP / UDP source port. The default value is -1, which means the rule don't care this condition.
columnInteger32.1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.16
aclL3v4ExtRuleTcpUdpMinSrcPort
The minimum port in the source port range.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.17
aclL3v4ExtRuleTcpUdpMaxSrcPort
The maximum port in the source port range.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.18
aclL3v4ExtRuleIPPrecedencecolumnInteger32.1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.19
aclL3v4ExtRuleAccessID
L3 Filter rule ID.
columnInteger32.1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.2
aclL3v4ExtRuleDscp
The IP Dscp value to be checked against the packet. A default value is '-1', which means the rule don't care this condition. The aclL3RuleTos should be specified as dscp.
columnInteger32.1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.20
aclL3v4ExtRuleToS
The ToS value to be checked against the packet. A default value is '-1', which means the rule don't care this condition. The cmAclL3RuleTos should be specified as dscp.
columnInteger32.1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.21
aclL3v4ExtRuleTcpAckBit
The TCP ACK bit to be checked against the packet. The default value is 'donotcare'(3), which means the rule don't care this condition.
columnEnumeration.1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.22
aclL3v4ExtRuleTcpRstBit
The TCP RST bit to be checked against the packet. The default value is 'donotcare'(3), which means the rule don't care this condition.
columnEnumeration.1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.23
aclL3v4ExtRuleTcpUrgBit
The TCP Urg bit to be checked against the packet. The default value is 'donotcare'(3), which means the rule don't care this condition.
columnEnumeration.1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.24
aclL3v4ExtRuleTcpPshBit
The TCP Psh bit to be checked against the packet. The default value is 'donotcare'(3). which means the rule don't care this condition.
columnEnumeration.1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.25
aclL3v4ExtRuleTcpSynBit
The TCP Syn bit to be checked against the packet. The default value is 'donotcare'(3), which means the rule don't care this condition.
columnEnumeration.1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.26
aclL3v4ExtRuleTcpFinBit
The TCP Fin bit to be checked against the packet. The default value is 'donotcare'(3), which means the rule don't care this condition.
columnEnumeration.1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.27
aclL3v4ExtRuleTimeRange
An administratively assigned string, which may be used to identify the Profile.
columnOctetString.1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.29
aclL3v4ExtRuleProtocol
The type of protocol to be checked against the packet.
columnEnumeration.1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.3
aclL3v4ExtRuleMatchCount
Number of times this filter is matched.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.30
aclL3v4ExtRuleStatus
This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of th…
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.31
aclL3v4ExtRuleFragmentscolumnEnumeration.1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.4
aclL3v4ExtRuleICMPMessageType
The message type to be checked against the packet. If the message type matches with the packet, then the packet will be dropped / allowed based on the action set in aclL3RuleActio…
columnInteger32.1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.5
aclL3v4ExtRuleICMPMessageCode
The message code to be checked against the packet. If the packet matches with the message code, then the packet will be dropped / allowed based on the action set in aclL3RuleActio…
columnInteger32.1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.6
aclL3v4ExtRuleDstIpAddr
Destination IP address to be matched with the packet. The default value will be zero, which means the rule don't care this condition.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.7
aclL3v4ExtRuleSrcIpAddr
Source IP address to be matched with the packet. The default value will be zero, which means the rule don't care this condition.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.8
aclL3v4ExtRuleDstIpAddrMask
The IP subnet mask for Destination IP address.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.9