aclExpertExtRuleTimeRange
DLINK-DXS-1210-12SC-AX-MIB ·
.1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.35
Object
column
r/w
OctetString
An administratively assigned string, which may be used to identify the Profile.
Context
- MIB
- DLINK-DXS-1210-12SC-AX-MIB
- OID
.1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.35- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- aclExpertExtRuleEntry
- Table
- aclExpertExtRuleTable
- Siblings
- 36
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-32
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| aclExpertExtRuleProfileNo The Profile ID which this rule join. | column | Integer32 | .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.1 |
| aclExpertExtRuleSrcIpAddrMask The IP subnet mask for Source IP address. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.10 |
| aclExpertExtRuleTcpUdpDstOperator The type of UDP/TCP port operator indicates how a packet's
TCP/UDP source or destination port number is compared.
none(1) - No comparison.
eq (2)- equal
gt (3)- greater than.
lt (… | column | Enumeration | .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.11 |
| aclExpertExtRuleTcpUdpDstPort The TCP / UDP destination port. The default value is -1,
which means the rule don't care this condition. | column | Integer32 | .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.12 |
| aclExpertExtRuleTcpUdpMinDstPort The minimum port in the destination port range. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.13 |
| aclExpertExtRuleTcpUdpMaxDstPort The maximum port in the destination port range. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.14 |
| aclExpertExtRuleTcpUdpSrcOperator The type of UDP/TCP port operator indicates how a packet's
TCP/UDP source or destination port number is compared.
none(1) - No comparison.
eq (2)- equal
gt (3)- greater than.
lt (… | column | Enumeration | .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.15 |
| aclExpertExtRuleTcpUdpSrcPort The TCP / UDP source port. The default value is -1,
which means the rule don't care this condition. | column | Integer32 | .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.16 |
| aclExpertExtRuleTcpUdpMinSrcPort The minimum port in the source port range. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.17 |
| aclExpertExtRuleTcpUdpMaxSrcPort The maximum port in the source port range. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.18 |
| aclExpertExtRuleIPPrecedence | column | Integer32 | .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.19 |
| aclExpertExtRuleAccessID L3 Filter rule ID. | column | Integer32 | .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.2 |
| aclExpertExtRuleDscp The IP Dscp value to be checked against the packet.
A default value is '-1', which means the rule don't
care this condition.
The aclL3RuleTos should be specified as dscp. | column | Integer32 | .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.20 |
| aclExpertExtRuleToS The ToS value to be checked against the packet.
A default value is '-1', which means the rule don't
care this condition.
The cmAclL3RuleTos should be specified as dscp. | column | Integer32 | .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.21 |
| aclExpertExtRuleTcpAckBit The TCP ACK bit to be checked against the packet. The default
value is 'donotcare'(3), which means the rule don't care this
condition. | column | Enumeration | .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.22 |
| aclExpertExtRuleTcpRstBit The TCP RST bit to be checked against the packet. The default
value is 'donotcare'(3), which means the rule don't care this
condition. | column | Enumeration | .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.23 |
| aclExpertExtRuleTcpUrgBit The TCP Urg bit to be checked against the packet. The default
value is 'donotcare'(3), which means the rule don't care this
condition. | column | Enumeration | .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.24 |
| aclExpertExtRuleTcpPshBit The TCP Psh bit to be checked against the packet. The default
value is 'donotcare'(3). which means the rule don't care this
condition. | column | Enumeration | .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.25 |
| aclExpertExtRuleTcpSynBit The TCP Syn bit to be checked against the packet. The default
value is 'donotcare'(3), which means the rule don't care this condition. | column | Enumeration | .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.26 |
| aclExpertExtRuleTcpFinBit The TCP Fin bit to be checked against the packet. The default
value is 'donotcare'(3), which means the rule don't care this
condition. | column | Enumeration | .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.27 |
| aclExpertExtRuleDstMacAddr Destination MAC address to be matched with the packet. By Default, the
Destination Mac Address will be zero,which means the rule don't care this
condition. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.28 |
| aclExpertExtRuleSrcMacAddr Source MAC address to be matched with the packet. By Default, the Source
Mac Address will be zero, which means the rule don't care this condition..
address | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.29 |
| aclExpertExtRuleProtocol The type of protocol to be checked against the packet. | column | Enumeration | .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.3 |
| aclExpertExtRuleVlanId Vlan Id to be filtered. In case of Provider bridges, This Vlan Id will
be treated as customer Vlan Id. By Default, the value will be '-1',
which means the rule don't care this con… | column | Integer32 | .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.30 |
| aclExpertExtRule1pPriority 802.1p priority to be matched with the packet. By Default, the value
will be '-1', which means the rule don't care this condition. | column | Integer32 | .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.31 |
| aclExpertExtRuleDstMacAddrMask The MAC address Mask work for Destination MAC address. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.32 |
| aclExpertExtRuleSrcMacAddrMask The MAC address Mask work for Source MAC address. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.33 |
| aclExpertExtRuleAction Specifies the action to be taken on the packet if the filter
rule matches. | column | Enumeration | .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.34 |
| aclExpertExtRuleMatchCount Number of times this filter is matched. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.36 |
| aclExpertExtRuleStatus This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of th… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.37 |
| aclExpertExtRuleFragments | column | Enumeration | .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.4 |
| aclExpertExtRuleICMPMessageType The message type to be checked against the packet. If the
message type matches with the packet, then the packet will be
dropped / allowed based on the action set in aclL3RuleActio… | column | Integer32 | .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.5 |
| aclExpertExtRuleICMPMessageCode The message code to be checked against the packet. If the
packet matches with the message code, then the packet will
be dropped / allowed based on the action set in aclL3RuleActio… | column | Integer32 | .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.6 |
| aclExpertExtRuleDstIpAddr Destination IP address to be matched with the packet.
The default value will be zero, which means the rule
don't care this condition. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.7 |
| aclExpertExtRuleSrcIpAddr Source IP address to be matched with the packet.
The default value will be zero, which means the
rule don't care this condition. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.8 |
| aclExpertExtRuleDstIpAddrMask The IP subnet mask for Destination IP address. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.9 |