diffServActionDSCP
DIFF-SERV-MIB ·
.1.3.6.1.4.1.9.6.1.101.51.1.2.5.1.3
Object
column
r/w
Dscp
The DSCP that traffic conforming to this classifier and this meter is remarked with. Note that if the classifier is working from the same DSCP value, no effective change in the DSCP results. Differentiated Services may result in packet remarking both on ingress to a network and on egress, and it is quite possible that ingress and egress would occur in the same router.
Context
- MIB
- DIFF-SERV-MIB
- OID
.1.3.6.1.4.1.9.6.1.101.51.1.2.5.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- diffServActionEntry
- Table
- diffServActionTable
- Siblings
- 14
Syntax
Dscp
- Source
- Dscp
- Base type
Integer32
Values & Constraints
Type Constraints
range: 0..63
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| diffServActionNumber The number of the meter, for reference from the
classifier or in cascade from another meter. | column | Integer32 | .1.3.6.1.4.1.89.51.1.2.5.1.1 |
| diffServActionConformingOctets The number of octets conforming to this meter. This
object may be used on low speed interfaces, and
represents the least significant 32 bits of
diffServActionHCConformingOctets.… | column | bytes SNMPv2-SMICounter32 | .1.3.6.1.4.1.89.51.1.2.5.1.10 |
| diffServActionTailDrops The number of packets conforming to this classifier
and meter that have been dropped because either the
meter always drops, or the queue's depth exceeds the
max-threshold value. … | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.89.51.1.2.5.1.11 |
| diffServActionHCTailDrops The number of packets conforming to this classifier
and meter that have been dropped because either the
meter always drops, or the queue's depth exceeds the
max-threshold value. … | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.89.51.1.2.5.1.12 |
| diffServActionRandomDrops The number of packets conforming to this classifier
and meter that have been dropped by a random drop
process because the queue is over-full. On high speed
lines, this object re… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.89.51.1.2.5.1.13 |
| diffServActionHCRandomDrops The number of packets conforming to this classifier
and meter that have been dropped by a random drop
process because the queue is over-full. This object is
used on high speed l… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.89.51.1.2.5.1.14 |
| diffServActionStatus The RowStatus variable controls the activation,
deactivation, or deletion of a meter. Any writable
variable may be modified whether the row is active or
notInService. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.89.51.1.2.5.1.15 |
| diffServActionNext The 'Next' pointer selects which queue or Traffic
Control Block on the interface. Incoming traffic may
use the value zeroDotZero in this variable to indicate
that no queuing on re… | column | SNMPv2-TCRowPointer | .1.3.6.1.4.1.89.51.1.2.5.1.2 |
| diffServActionMinThreshold The min-threshold is the queue depth that a random
drop process will seek to manage the queue's depth to.
This object is in the action table rather than the
queue table because Di… | column | packets SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.89.51.1.2.5.1.4 |
| diffServActionMaxThreshold The max-threshold is the maximum permissible queue
depth. In tail drop scenarios, the queue will drop if a
packet is presented to it and it is instantaneously
full by this measure… | column | packets SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.89.51.1.2.5.1.5 |
| diffServActionDropPolicy The drop policy applied to traffic. | column | Enumeration | .1.3.6.1.4.1.89.51.1.2.5.1.6 |
| diffServActionHCConformingPackets The number of Packets conforming to this meter. This
object is used on high speed interfaces.
Discontinuities in the value of this counter can occur
at re-initialization of the m… | column | bytes SNMPv2-SMICounter64 | .1.3.6.1.4.1.89.51.1.2.5.1.7 |
| diffServActionConformingPackets The number of Packets conforming to this meter. This
object may be used on low speed interfaces, and
represents the least significant 32 bits of
diffServActionHCConformingPacket… | column | bytes SNMPv2-SMICounter32 | .1.3.6.1.4.1.89.51.1.2.5.1.8 |
| diffServActionHCConformingOctets The number of octets conforming to this meter. This
object is used on high speed interfaces.
Discontinuities in the value of this counter can occur
at re-initialization of the ma… | column | bytes SNMPv2-SMICounter64 | .1.3.6.1.4.1.89.51.1.2.5.1.9 |