swL2DevCtrlFilterEAPOLPDU
DHS3226-MIB ·
.1.3.6.1.4.1.171.11.36.2.5.2.14
Object
scalar
r/w
Enumeration
Indicates whether to filter the EAPOL PDU. If the administrative state for Port Access Control in a System is enabled, this object is meaningless. Otherwise, when this object is yes(1), the EAPOL packets will be dropped. When this object is no(2), the EAPOL packets will pass.
Context
- MIB
- DHS3226-MIB
- OID
.1.3.6.1.4.1.171.11.36.2.5.2.14- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- swL2DevCtrl
- Siblings
- 16
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | yes |
2 | no |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| swL2DevCtrlSystemReboot This object indicates the agent system reboot state. The agent always
returns other(1) when this object is read. | scalar | Enumeration | .1.3.6.1.4.1.171.11.36.2.5.2.1 |
| swL2DevCtrlDestLookupFailureCtrl This object indicates destination lookup failure rate control function
is enabled or disabled. The swL2PortCtrlBMDStormLimit object will
descript the detail about the storm contro… | scalar | Enumeration | .1.3.6.1.4.1.171.11.36.2.5.2.10 |
| swL2DevCtrlBMDStormLimit This object to decide how many broadcast/multicast (depend on
swL2DevCtrlBcastStormCtrl, swL2DevCtrlMcastStormCtrl or
swL2DevCtrlDestLookupFailureCtrlobjects whether is enabled) p… | scalar | Integer32 | .1.3.6.1.4.1.171.11.36.2.5.2.11 |
| swL2DevCtrlCleanAllStatisticCounter As the object is set to active, all the statistic counters will be cleared.
If set to normal, do nothing. | scalar | Enumeration | .1.3.6.1.4.1.171.11.36.2.5.2.12 |
| swL2DevCtrlSnmpEnableAuthenTraps Indicates whether the SNMP entity is permitted to generate
authenticationFailure traps. The value of this object
overrides any configuration information; as such, it
provides a m… | scalar | Enumeration | .1.3.6.1.4.1.171.11.36.2.5.2.13 |
| swL2DevCtrlTrafficSegmentation If this object is disabled(2), then no traffic segmentation.
When we set it to enabled(1), there are three conditions for the
traffic segmentation.
(1) If without plu… | scalar | Enumeration | .1.3.6.1.4.1.171.11.36.2.5.2.15 |
| agentPingTest | node | - | .1.3.6.1.4.1.171.11.36.2.5.2.16 |
| swL2DevCtrlVlanIdOfFDBTbl Indicates the VLAN ID which the Dot1dTpFdbTable belongs to ;
The default value is DEFAULT_VLAN_ID of system . | scalar | VlanId | .1.3.6.1.4.1.171.11.36.2.5.2.17 |
| swL2DevCtrlSystemIP This object indicates system ip. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.171.11.36.2.5.2.2 |
| swL2DevCtrlSubnetMask This object indicates system subnet mask. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.171.11.36.2.5.2.3 |
| swL2DevCtrlDefaultGateway This object indicates system default gateway. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.171.11.36.2.5.2.4 |
| swL2DevCtrlManagementVlanId This object controls which Vlan includes system ip. And the Vlan
should have been created. | scalar | VlanId | .1.3.6.1.4.1.171.11.36.2.5.2.5 |
| swL2DevCtrlStpState This object can be enabled or disabled spanning tree algorithm
during runtime of the system. | scalar | Enumeration | .1.3.6.1.4.1.171.11.36.2.5.2.6 |
| swL2DevCtrlIGMPSnooping This object indicates layer 2 Internet Group Management Protocol
(IGMP) capture function is enabled or disabled . | scalar | Enumeration | .1.3.6.1.4.1.171.11.36.2.5.2.7 |
| swL2DevCtrlBcastStormCtrl This object indicates broadcast storm control function is enabled or
disabled. The swL2PortCtrlBMDStormLimit object will descript the
detail about the storm control . | scalar | Enumeration | .1.3.6.1.4.1.171.11.36.2.5.2.8 |
| swL2DevCtrlMcastStormCtrl This object indicates multicast storm control function is enabled or
disabled. The swL2PortCtrlBMDStormLimit object will descript the
detail about the storm control . | scalar | Enumeration | .1.3.6.1.4.1.171.11.36.2.5.2.9 |