sysPortDescriptionTable

DGS-1100-06ME-AX · .1.3.6.1.4.1.171.10.134.1.1.1.14

Object

table

The port description table.

Context

MIB: DGS-1100-06ME-AX
OID: .1.3.6.1.4.1.171.10.134.1.1.1.14
Type: table
Status: current
Parent: companySystem
Siblings: 27
Children: 1

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects

Object	Type	Syntax	OID
sysSwitchName System name used for identification of the device. The following characters are allowed to input. 0 ~ 9 / a ~ z / A ~ Z Special character	scalar	OctetString	`.1.3.6.1.4.1.171.10.134.1.1.1.1`
sysSave This object is used to save Configuration , value 1 save config_1 , value 2 is not in process , value 3 is save config_1 and value 4 is save config_2.	scalar	Enumeration	`.1.3.6.1.4.1.171.10.134.1.1.1.10`
sysJumboFrameEnable Gigabit Web Smart Switches support jumbo frames (frames larger than the Ethernet frame size of 1522 bytes) of up to 10,000 bytes (tagged). Default jumbo frame is disabled.	scalar	Enumeration	`.1.3.6.1.4.1.171.10.134.1.1.1.12`
sysPortCtrlTable A table to control the port specific parameters of the device like speed, duplex mode, etc.	table	-	`.1.3.6.1.4.1.171.10.134.1.1.1.13`
sysPortErrTable The port error table.	table	-	`.1.3.6.1.4.1.171.10.134.1.1.1.15`
sysDhcpAutoConfiguration This object indicates auto config is enabled or disabled.	scalar	Enumeration	`.1.3.6.1.4.1.171.10.134.1.1.1.16`
sysWebState This object is for Enabled(1) or Disabled(2) Web state in the system.	scalar	Enumeration	`.1.3.6.1.4.1.171.10.134.1.1.1.17`
sysWebPortNumber Web Server Port Number.	scalar	Integer32	`.1.3.6.1.4.1.171.10.134.1.1.1.18`
sysARPAgingTime This object is for ARP aging time.	scalar	Integer32	`.1.3.6.1.4.1.171.10.134.1.1.1.19`
sysHardwareVersion Version number of the Hardware.	scalar	OctetString	`.1.3.6.1.4.1.171.10.134.1.1.1.2`
sysMACAgingTime This object is for MAC aging time.	scalar	Integer32	`.1.3.6.1.4.1.171.10.134.1.1.1.20`
telnetsettingManagementOnOff Enable/Disable management Telnetsetting mechanism.	scalar	Enumeration	`.1.3.6.1.4.1.171.10.134.1.1.1.23`
telnetUDPPort The value is for setting telnet's UDP Port.	scalar	Integer32	`.1.3.6.1.4.1.171.10.134.1.1.1.24`
autoRefreshConfiguration To set the WEB panel auto refresh timer.	scalar	Enumeration	`.1.3.6.1.4.1.171.10.134.1.1.1.25`
floodfdbOnOff To set enable status for flood fdb.	scalar	Enumeration	`.1.3.6.1.4.1.171.10.134.1.1.1.26`
sysContactName To set system contact name.	scalar	OctetString	`.1.3.6.1.4.1.171.10.134.1.1.1.27`
sysCommandLogging To set enable status for CommandLogging.	scalar	Enumeration	`.1.3.6.1.4.1.171.10.134.1.1.1.29`
sysFirmwareVersion Version number of the Firmware.	scalar	OctetString	`.1.3.6.1.4.1.171.10.134.1.1.1.3`
sysSerialNumber To get the serial number.	scalar	OctetString	`.1.3.6.1.4.1.171.10.134.1.1.1.30`
sysDhcpAutoImage This object indicates auto image is enabled or disabled.	scalar	Enumeration	`.1.3.6.1.4.1.171.10.134.1.1.1.34`
sysBootupConfigID To get/set bootup config ID.	scalar	Integer32	`.1.3.6.1.4.1.171.10.134.1.1.1.35`
sysBootupImage To get/set bootup Image.	scalar	Integer32	`.1.3.6.1.4.1.171.10.134.1.1.1.36`
sysLoginTimeoutInterval This time interval is used to count the time and logout web interface automatically.	scalar	Integer32	`.1.3.6.1.4.1.171.10.134.1.1.1.4`
sysLocationName The location name of this node (e.g., `telephone closet, 3rd floor'). If the location is unknown, the value is the zero-length string.	scalar	OctetString	`.1.3.6.1.4.1.171.10.134.1.1.1.5`
sysGroupInterval Group Interval is used to send D-link Discover packet to D-link SmartConsole Utility frequency. The timer in units of seconds. Set value 0 to disable group I…	scalar	Integer32	`.1.3.6.1.4.1.171.10.134.1.1.1.6`
sysSafeGuardEnable This object is used to set Safeguard Enable\Disable.	scalar	Enumeration	`.1.3.6.1.4.1.171.10.134.1.1.1.8`
sysRestart This object allows the user to restart the Switch (i.e)the entire switch will operationally go down and start again. Setting a value of 'true' causes the switch to be restarte…	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.171.10.134.1.1.1.9`

Child Objects