sysPortCtrlTable
DGS-1100-06ME-AX ·
.1.3.6.1.4.1.171.10.134.1.1.1.13
Object
table
A table to control the port specific parameters of the device like speed, duplex mode, etc.
Context
- MIB
- DGS-1100-06ME-AX
- OID
.1.3.6.1.4.1.171.10.134.1.1.1.13- Type
- table
- Status
- current
- Parent
- companySystem
- Siblings
- 27
- Children
- 1
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| sysSwitchName System name used for identification of the device.
The following characters are allowed to input.
0 ~ 9 / a ~ z / A ~ Z
Special character | scalar | OctetString | .1.3.6.1.4.1.171.10.134.1.1.1.1 |
| sysSave This object is used to save Configuration , value 1 save config_1 ,
value 2 is not in process , value 3 is save config_1 and value 4 is save config_2. | scalar | Enumeration | .1.3.6.1.4.1.171.10.134.1.1.1.10 |
| sysJumboFrameEnable Gigabit Web Smart Switches support jumbo frames (frames larger than
the Ethernet frame size of 1522 bytes) of up to 10,000 bytes (tagged).
Default jumbo frame is disabled. | scalar | Enumeration | .1.3.6.1.4.1.171.10.134.1.1.1.12 |
| sysPortDescriptionTable The port description table. | table | - | .1.3.6.1.4.1.171.10.134.1.1.1.14 |
| sysPortErrTable The port error table. | table | - | .1.3.6.1.4.1.171.10.134.1.1.1.15 |
| sysDhcpAutoConfiguration This object indicates auto config is enabled or disabled. | scalar | Enumeration | .1.3.6.1.4.1.171.10.134.1.1.1.16 |
| sysWebState This object is for Enabled(1) or Disabled(2) Web state in the system. | scalar | Enumeration | .1.3.6.1.4.1.171.10.134.1.1.1.17 |
| sysWebPortNumber Web Server Port Number. | scalar | Integer32 | .1.3.6.1.4.1.171.10.134.1.1.1.18 |
| sysARPAgingTime This object is for ARP aging time. | scalar | Integer32 | .1.3.6.1.4.1.171.10.134.1.1.1.19 |
| sysHardwareVersion Version number of the Hardware. | scalar | OctetString | .1.3.6.1.4.1.171.10.134.1.1.1.2 |
| sysMACAgingTime This object is for MAC aging time. | scalar | Integer32 | .1.3.6.1.4.1.171.10.134.1.1.1.20 |
| telnetsettingManagementOnOff Enable/Disable management Telnetsetting mechanism. | scalar | Enumeration | .1.3.6.1.4.1.171.10.134.1.1.1.23 |
| telnetUDPPort The value is for setting telnet's UDP Port. | scalar | Integer32 | .1.3.6.1.4.1.171.10.134.1.1.1.24 |
| autoRefreshConfiguration To set the WEB panel auto refresh timer. | scalar | Enumeration | .1.3.6.1.4.1.171.10.134.1.1.1.25 |
| floodfdbOnOff To set enable status for flood fdb. | scalar | Enumeration | .1.3.6.1.4.1.171.10.134.1.1.1.26 |
| sysContactName To set system contact name. | scalar | OctetString | .1.3.6.1.4.1.171.10.134.1.1.1.27 |
| sysCommandLogging To set enable status for CommandLogging. | scalar | Enumeration | .1.3.6.1.4.1.171.10.134.1.1.1.29 |
| sysFirmwareVersion Version number of the Firmware. | scalar | OctetString | .1.3.6.1.4.1.171.10.134.1.1.1.3 |
| sysSerialNumber To get the serial number. | scalar | OctetString | .1.3.6.1.4.1.171.10.134.1.1.1.30 |
| sysDhcpAutoImage This object indicates auto image is enabled or disabled. | scalar | Enumeration | .1.3.6.1.4.1.171.10.134.1.1.1.34 |
| sysBootupConfigID To get/set bootup config ID. | scalar | Integer32 | .1.3.6.1.4.1.171.10.134.1.1.1.35 |
| sysBootupImage To get/set bootup Image. | scalar | Integer32 | .1.3.6.1.4.1.171.10.134.1.1.1.36 |
| sysLoginTimeoutInterval This time interval is used to count the time and
logout web interface automatically. | scalar | Integer32 | .1.3.6.1.4.1.171.10.134.1.1.1.4 |
| sysLocationName The location name of this node (e.g., `telephone closet,
3rd floor'). If the location is unknown, the value is
the zero-length string. | scalar | OctetString | .1.3.6.1.4.1.171.10.134.1.1.1.5 |
| sysGroupInterval Group Interval is used to send D-link Discover packet to D-link
SmartConsole Utility frequency.
The timer in units of seconds.
Set value 0 to disable group I… | scalar | Integer32 | .1.3.6.1.4.1.171.10.134.1.1.1.6 |
| sysSafeGuardEnable This object is used to set Safeguard Enable\Disable. | scalar | Enumeration | .1.3.6.1.4.1.171.10.134.1.1.1.8 |
| sysRestart This object allows the user to restart the Switch
(i.e)the entire switch will operationally go down and
start again. Setting a value of 'true' causes the switch
to be restarte… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.171.10.134.1.1.1.9 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| sysPortCtrlEntry An entry appears in this table for each interface in the system.
Index to the table is the interface index of the port. | row | - | .1.3.6.1.4.1.171.10.134.1.1.1.13.1 |