sysLoginTimeoutInterval

DGS-1100-06ME-AX · .1.3.6.1.4.1.171.10.134.1.1.1.4
MIB view Table view

Object

scalar r/w Integer32 
This time interval is used to count the time and
logout web interface automatically.

Context

MIB
DGS-1100-06ME-AX
OID
.1.3.6.1.4.1.171.10.134.1.1.1.4
Type
scalar
Access
readwrite
Status
current
Parent
companySystem
Siblings
27

Syntax

Integer32

Values & Constraints

Object Constraints
range: 3-30

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
sysSwitchName
System name used for identification of the device. The following characters are allowed to input. 0 ~ 9 / a ~ z / A ~ Z Special character
scalarOctetString.1.3.6.1.4.1.171.10.134.1.1.1.1
sysSave
This object is used to save Configuration , value 1 save config_1 , value 2 is not in process , value 3 is save config_1 and value 4 is save config_2.
scalarEnumeration.1.3.6.1.4.1.171.10.134.1.1.1.10
sysJumboFrameEnable
Gigabit Web Smart Switches support jumbo frames (frames larger than the Ethernet frame size of 1522 bytes) of up to 10,000 bytes (tagged). Default jumbo frame is disabled.
scalarEnumeration.1.3.6.1.4.1.171.10.134.1.1.1.12
sysPortCtrlTable
A table to control the port specific parameters of the device like speed, duplex mode, etc.
table-.1.3.6.1.4.1.171.10.134.1.1.1.13
sysPortDescriptionTable
The port description table.
table-.1.3.6.1.4.1.171.10.134.1.1.1.14
sysPortErrTable
The port error table.
table-.1.3.6.1.4.1.171.10.134.1.1.1.15
sysDhcpAutoConfiguration
This object indicates auto config is enabled or disabled.
scalarEnumeration.1.3.6.1.4.1.171.10.134.1.1.1.16
sysWebState
This object is for Enabled(1) or Disabled(2) Web state in the system.
scalarEnumeration.1.3.6.1.4.1.171.10.134.1.1.1.17
sysWebPortNumber
Web Server Port Number.
scalarInteger32.1.3.6.1.4.1.171.10.134.1.1.1.18
sysARPAgingTime
This object is for ARP aging time.
scalarInteger32.1.3.6.1.4.1.171.10.134.1.1.1.19
sysHardwareVersion
Version number of the Hardware.
scalarOctetString.1.3.6.1.4.1.171.10.134.1.1.1.2
sysMACAgingTime
This object is for MAC aging time.
scalarInteger32.1.3.6.1.4.1.171.10.134.1.1.1.20
telnetsettingManagementOnOff
Enable/Disable management Telnetsetting mechanism.
scalarEnumeration.1.3.6.1.4.1.171.10.134.1.1.1.23
telnetUDPPort
The value is for setting telnet's UDP Port.
scalarInteger32.1.3.6.1.4.1.171.10.134.1.1.1.24
autoRefreshConfiguration
To set the WEB panel auto refresh timer.
scalarEnumeration.1.3.6.1.4.1.171.10.134.1.1.1.25
floodfdbOnOff
To set enable status for flood fdb.
scalarEnumeration.1.3.6.1.4.1.171.10.134.1.1.1.26
sysContactName
To set system contact name.
scalarOctetString.1.3.6.1.4.1.171.10.134.1.1.1.27
sysCommandLogging
To set enable status for CommandLogging.
scalarEnumeration.1.3.6.1.4.1.171.10.134.1.1.1.29
sysFirmwareVersion
Version number of the Firmware.
scalarOctetString.1.3.6.1.4.1.171.10.134.1.1.1.3
sysSerialNumber
To get the serial number.
scalarOctetString.1.3.6.1.4.1.171.10.134.1.1.1.30
sysDhcpAutoImage
This object indicates auto image is enabled or disabled.
scalarEnumeration.1.3.6.1.4.1.171.10.134.1.1.1.34
sysBootupConfigID
To get/set bootup config ID.
scalarInteger32.1.3.6.1.4.1.171.10.134.1.1.1.35
sysBootupImage
To get/set bootup Image.
scalarInteger32.1.3.6.1.4.1.171.10.134.1.1.1.36
sysLocationName
The location name of this node (e.g., `telephone closet, 3rd floor'). If the location is unknown, the value is the zero-length string.
scalarOctetString.1.3.6.1.4.1.171.10.134.1.1.1.5
sysGroupInterval
Group Interval is used to send D-link Discover packet to D-link SmartConsole Utility frequency. The timer in units of seconds. Set value 0 to disable group I…
scalarInteger32.1.3.6.1.4.1.171.10.134.1.1.1.6
sysSafeGuardEnable
This object is used to set Safeguard Enable\Disable.
scalarEnumeration.1.3.6.1.4.1.171.10.134.1.1.1.8
sysRestart
This object allows the user to restart the Switch (i.e)the entire switch will operationally go down and start again. Setting a value of 'true' causes the switch to be restarte…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.171.10.134.1.1.1.9