aclv6L3RuleAction
DGS-1100-06ME-AX ·
.1.3.6.1.4.1.171.10.134.1.1.15.3.2.1.24
Object
column
r/w
Enumeration
Specifies the action to be taken on the packet if the filter rule matches.
Context
- MIB
- DGS-1100-06ME-AX
- OID
.1.3.6.1.4.1.171.10.134.1.1.15.3.2.1.24- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- aclv6L3RuleEntry
- Table
- aclv6L3RuleTable
- Siblings
- 25
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | allow |
2 | drop |
4 | rateLimit |
5 | replaceDSCP |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| aclv6L3RuleAccessID L3 Filter rule ID. 0 means auto assign. | column | Integer32 | .1.3.6.1.4.1.171.10.134.1.1.15.3.2.1.1 |
| aclv6L3RuleSrcIpAddrMask The IP subnet mask for Source IP address.
This field is read-only and copy from it's Profile setting. | column | Ipv6Address | .1.3.6.1.4.1.171.10.134.1.1.15.3.2.1.10 |
| aclv6L3RuleTcpUdpDstPort The TCP / UDP destination port. The default value is -1,
which means the rule don't care this condition. | column | Integer32 | .1.3.6.1.4.1.171.10.134.1.1.15.3.2.1.11 |
| aclv6L3RuleTcpUdpSrcPort The TCP / UDP source port. The default value is -1,
which means the rule don't care this condition. | column | Integer32 | .1.3.6.1.4.1.171.10.134.1.1.15.3.2.1.12 |
| aclv6L3RuleTcpUdpDstPortMask The TCP / UDP Destination port Mask.
This field is read-only and copy from it's Profile setting. | column | OctetString | .1.3.6.1.4.1.171.10.134.1.1.15.3.2.1.13 |
| aclv6L3RuleTcpUdpSrcPortMask The TCP / UDP Source port Mask.
This field is read-only and copy from it's Profile setting. | column | OctetString | .1.3.6.1.4.1.171.10.134.1.1.15.3.2.1.14 |
| aclv6L3RuleTcpAckBit The TCP ACK bit to be checked against the packet. The default
value is 'dont_care'(-1), which means the rule don't care this
condition. | column | Enumeration | .1.3.6.1.4.1.171.10.134.1.1.15.3.2.1.15 |
| aclv6L3RuleTcpRstBit The TCP RST bit to be checked against the packet. The default
value is 'dont_care'(-1), which means the rule don't care this
condition. | column | Enumeration | .1.3.6.1.4.1.171.10.134.1.1.15.3.2.1.16 |
| aclv6L3RuleTcpUrgBit The TCP Urg bit to be checked against the packet. The default
value is 'dont_care'(-1), which means the rule don't care this
condition. | column | Enumeration | .1.3.6.1.4.1.171.10.134.1.1.15.3.2.1.17 |
| aclv6L3RuleTcpPshBit The TCP Psh bit to be checked against the packet. The default
value is 'dont_care'(-1). which means the rule don't care this
condition. | column | Enumeration | .1.3.6.1.4.1.171.10.134.1.1.15.3.2.1.18 |
| aclv6L3RuleTcpSynBit The TCP Syn bit to be checked against the packet. The default
value is 'dont_care'(-1), which means the rule don't care this condition. | column | Enumeration | .1.3.6.1.4.1.171.10.134.1.1.15.3.2.1.19 |
| aclv6L3RuleProfileNo The Profile ID which this rule join. | column | Integer32 | .1.3.6.1.4.1.171.10.134.1.1.15.3.2.1.2 |
| aclv6L3RuleTcpFinBit The TCP Fin bit to be checked against the packet. The default
value is 'dont_care'(-1), which means the rule don't care this
condition. | column | Enumeration | .1.3.6.1.4.1.171.10.134.1.1.15.3.2.1.20 |
| aclv6L3RuleTrafficClass The IP Dscp value to be checked against the packet.
A default value is '-1', which means the rule don't
care this condition. | column | Integer32 | .1.3.6.1.4.1.171.10.134.1.1.15.3.2.1.21 |
| aclv6L3RulePortList Specifies the complete set of ports over which if the packet arrives
this filter rule will be applicable. | column | PortList | .1.3.6.1.4.1.171.10.134.1.1.15.3.2.1.23 |
| aclv6L3RuleRateLimit Rate limit for matched packet. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.171.10.134.1.1.15.3.2.1.25 |
| aclv6L3RuleReplaceDSCP ReplaceDSCP for matched packet. | column | Integer32 | .1.3.6.1.4.1.171.10.134.1.1.15.3.2.1.26 |
| aclv6L3RuleStatus This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of th… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.171.10.134.1.1.15.3.2.1.28 |
| aclv6L3RuleProtocol The type of protocol to be checked against the packet. | column | Enumeration | .1.3.6.1.4.1.171.10.134.1.1.15.3.2.1.3 |
| aclv6L3RuleProtocolMask The IP protocol mask.
This field is read-only and copy from it's Profile setting.
It will work with the other field,aclL3RuleProtocol,
to caculate a range of IP protocol which is… | column | OctetString | .1.3.6.1.4.1.171.10.134.1.1.15.3.2.1.4 |
| aclv6L3RuleICMPMessageType The message type to be checked against the packet. If the
message type matches with the packet, then the packet will be
dropped / allowed based on the action set in aclL3RuleActio… | column | Integer32 | .1.3.6.1.4.1.171.10.134.1.1.15.3.2.1.5 |
| aclv6L3RuleICMPMessageCode The message code to be checked against the packet. If the
packet matches with the message code, then the packet will
be dropped / allowed based on the action set in aclL3RuleActio… | column | Integer32 | .1.3.6.1.4.1.171.10.134.1.1.15.3.2.1.6 |
| aclv6L3RuleDstIpAddr Destination IP address to be matched with the packet.
The default value will be zero, which means the rule
don't care this condition. | column | Ipv6Address | .1.3.6.1.4.1.171.10.134.1.1.15.3.2.1.7 |
| aclv6L3RuleSrcIpAddr Source IP address to be matched with the packet.
The default value will be zero, which means the
rule don't care this condition. | column | Ipv6Address | .1.3.6.1.4.1.171.10.134.1.1.15.3.2.1.8 |
| aclv6L3RuleDstIpAddrMask The IP subnet mask for Destination IP address.
This field is read-only and copy from it's Profile setting. | column | Ipv6Address | .1.3.6.1.4.1.171.10.134.1.1.15.3.2.1.9 |