aclL3RuleEntry

DGS-1100-06ME-AX · .1.3.6.1.4.1.171.10.134.1.1.15.3.1.1
MIB view Table view

Object

row 
Each entry in this table is a L3 filter rule.
Index to the table is L3 filter number and Profile ID.

Context

MIB
DGS-1100-06ME-AX
OID
.1.3.6.1.4.1.171.10.134.1.1.15.3.1.1
Type
row
Status
current
Parent
aclL3RuleTable
Table
aclL3RuleTable
Children
28

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Child Objects
ObjectTypeSyntaxOID
aclL3RuleAccessID
L3 Filter rule ID. 0 means auto assign.
columnInteger32.1.3.6.1.4.1.171.10.134.1.1.15.3.1.1.1
aclL3RuleSrcIpAddrMask
The IP subnet mask for Source IP address. This field is read-only and copy from it's Profile setting.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.171.10.134.1.1.15.3.1.1.10
aclL3RuleTcpUdpDstPort
The TCP / UDP destination port. The default value is -1, which means the rule don't care this condition.
columnInteger32.1.3.6.1.4.1.171.10.134.1.1.15.3.1.1.11
aclL3RuleTcpUdpSrcPort
The TCP / UDP source port. The default value is -1, which means the rule don't care this condition.
columnInteger32.1.3.6.1.4.1.171.10.134.1.1.15.3.1.1.12
aclL3RuleTcpUdpDstPortMask
The TCP / UDP Destination port Mask. This field is read-only and copy from it's Profile setting.
columnOctetString.1.3.6.1.4.1.171.10.134.1.1.15.3.1.1.13
aclL3RuleTcpUdpSrcPortMask
The TCP / UDP Source port Mask. This field is read-only and copy from it's Profile setting.
columnOctetString.1.3.6.1.4.1.171.10.134.1.1.15.3.1.1.14
aclL3RuleTcpAckBit
The TCP ACK bit to be checked against the packet. The default value is 'dont_care'(-1), which means the rule don't care this condition.
columnEnumeration.1.3.6.1.4.1.171.10.134.1.1.15.3.1.1.15
aclL3RuleTcpRstBit
The TCP RST bit to be checked against the packet. The default value is 'dont_care'(-1), which means the rule don't care this condition.
columnEnumeration.1.3.6.1.4.1.171.10.134.1.1.15.3.1.1.16
aclL3RuleTcpUrgBit
The TCP Urg bit to be checked against the packet. The default value is 'dont_care'(-1), which means the rule don't care this condition.
columnEnumeration.1.3.6.1.4.1.171.10.134.1.1.15.3.1.1.17
aclL3RuleTcpPshBit
The TCP Psh bit to be checked against the packet. The default value is 'dont_care'(-1). which means the rule don't care this condition.
columnEnumeration.1.3.6.1.4.1.171.10.134.1.1.15.3.1.1.18
aclL3RuleTcpSynBit
The TCP Syn bit to be checked against the packet. The default value is 'dont_care'(-1), which means the rule don't care this condition.
columnEnumeration.1.3.6.1.4.1.171.10.134.1.1.15.3.1.1.19
aclL3RuleProfileNo
The Profile ID which this rule join.
columnInteger32.1.3.6.1.4.1.171.10.134.1.1.15.3.1.1.2
aclL3RuleTcpFinBit
The TCP Fin bit to be checked against the packet. The default value is 'dont_care'(-1), which means the rule don't care this condition.
columnEnumeration.1.3.6.1.4.1.171.10.134.1.1.15.3.1.1.20
aclL3RuleDscp
The IP Dscp value to be checked against the packet. A default value is '-1', which means the rule don't care this condition.
columnInteger32.1.3.6.1.4.1.171.10.134.1.1.15.3.1.1.21
aclL3RuleTos
The IP Dscp value to be checked against the packet. A default value is '-1', which means the rule don't care this condition.
columnInteger32.1.3.6.1.4.1.171.10.134.1.1.15.3.1.1.22
aclL3RuleIgmpType
The IGMP Type to be checked against the packet.A default value is '-1', which means the rule don't care this condition.
columnInteger32.1.3.6.1.4.1.171.10.134.1.1.15.3.1.1.23
aclL3RulePortList
Specifies the complete set of ports over which if the packet arrives this filter rule will be applicable.
columnPortList.1.3.6.1.4.1.171.10.134.1.1.15.3.1.1.24
aclL3RuleAction
Specifies the action to be taken on the packet if the filter rule matches.
columnEnumeration.1.3.6.1.4.1.171.10.134.1.1.15.3.1.1.25
aclL3RuleRateLimit
Rate limit for matched packet.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.171.10.134.1.1.15.3.1.1.26
aclL3RuleReplaceDSCP
ReplaceDSCP for matched packet.
columnInteger32.1.3.6.1.4.1.171.10.134.1.1.15.3.1.1.27
aclL3RuleStatus
This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of th…
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.171.10.134.1.1.15.3.1.1.29
aclL3RuleProtocol
The type of protocol to be checked against the packet.
columnEnumeration.1.3.6.1.4.1.171.10.134.1.1.15.3.1.1.3
aclL3RuleProtocolMask
The IP protocol mask. This field is read-only and copy from it's Profile setting. It will work with the other field,aclL3RuleProtocol, to caculate a range of IP protocol which is…
columnOctetString.1.3.6.1.4.1.171.10.134.1.1.15.3.1.1.4
aclL3RuleICMPMessageType
The message type to be checked against the packet. If the message type matches with the packet, then the packet will be dropped / allowed based on the action set in aclL3RuleActio…
columnInteger32.1.3.6.1.4.1.171.10.134.1.1.15.3.1.1.5
aclL3RuleICMPMessageCode
The message code to be checked against the packet. If the packet matches with the message code, then the packet will be dropped / allowed based on the action set in aclL3RuleActio…
columnInteger32.1.3.6.1.4.1.171.10.134.1.1.15.3.1.1.6
aclL3RuleDstIpAddr
Destination IP address to be matched with the packet. The default value will be zero, which means the rule don't care this condition.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.171.10.134.1.1.15.3.1.1.7
aclL3RuleSrcIpAddr
Source IP address to be matched with the packet. The default value will be zero, which means the rule don't care this condition.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.171.10.134.1.1.15.3.1.1.8
aclL3RuleDstIpAddrMask
The IP subnet mask for Destination IP address. This field is read-only and copy from it's Profile setting.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.171.10.134.1.1.15.3.1.1.9
Indexes
ObjectTypeSyntaxOID
aclL3RuleProfileNo
The Profile ID which this rule join.
columnInteger32.1.3.6.1.4.1.171.10.134.1.1.15.3.1.1.2
aclL3RuleAccessID
L3 Filter rule ID. 0 means auto assign.
columnInteger32.1.3.6.1.4.1.171.10.134.1.1.15.3.1.1.1