dF10PFCDcbxOperState
DF10-DCB-MIB ·
.1.3.6.1.4.1.6027.3.15.3.3.2.1.3
Object
column
DcbState
This object is used to display the current state of the
DCBX state machine for the PFC feature on the given port.
If state is Off '(0)', then PFC Operational(local) parameters
will be same as PFC Admin Configuration Parameters and will
not have any impact in the system(hardware).
If state is init '(1)', then PFC Operational(local) parameters
will be same as PFC Admin Configuration Parameters.
If state is rxrecommended '(2)',then PFC Operational(local) parameters
will be same as PFC Remote Parameters.
internallypropagated '(3)', In this state all the Operational(local)
parameters for the feature will be same as the internal propagated
information from the config source.
Context
- MIB
- DF10-DCB-MIB
- OID
.1.3.6.1.4.1.6027.3.15.3.3.2.1.3- Type
- column
- Access
- readonly
- Status
- current
- Parent
- dF10PFCPortEntry
- Table
- dF10PFCPortTable
- Siblings
- 8
Syntax
DcbState
- Source
- DcbState
- Base type
Enumeration
Values & Constraints
Type Values
0 | off |
1 | init |
2 | rxrecommended |
3 | internallypropagated |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| dF10PFCPortNumber This indicates the interface identifier for which the PFC
configuration is applied. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.6027.3.15.3.3.2.1.1 |
| dF10PFCAdminMode This object is used to display Admin mode for PFC feature on
the given port.
If mode is 'on(1)',PFC feature is enabled on this port.
PFC configurations, either from… | column | DcbAdminMode | .1.3.6.1.4.1.6027.3.15.3.3.2.1.2 |
| dF10PFCDcbxStateMachine This object is used to display the DCBX state machine
type that is used by the PFC feature on the given port. | column | DcbStateMachineType | .1.3.6.1.4.1.6027.3.15.3.3.2.1.4 |
| dF10PFCOperStatus This object gives information on the operational status of PFC
on the given port.
Enabled(1) indicates PFC on the port is in sync with the remote
and is operationally up.
Disabled… | column | EnabledStatus | .1.3.6.1.4.1.6027.3.15.3.3.2.1.5 |
| dF10PFCClearTLVCounters This object when set to TRUE, clears the following counters
associated with a Port:
dF10PFCTxTLVCounter,
dF10PFCRxTLVCounter,
dF10PFCRxTLVErrors.
Settin… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6027.3.15.3.3.2.1.6 |
| dF10PFCTxTLVCounter This object is used to keep track of the number of PFC TLV
that are transmitted from this port. This counter will be
incremented every time when there is PFC TLV is generated
an… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6027.3.15.3.3.2.1.7 |
| dF10PFCRxTLVCounter This object is used to keep track of the number of PFC TLV
that are received in this port. This counter will be
incremented every time when there is PFC TLV is received
from the … | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6027.3.15.3.3.2.1.8 |
| dF10PFCRxTLVErrors This object is used to keep track of number of malformed TLVs received by PFC.
This counter will be incremented every time a PFC-TLV is dropped by PFC. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6027.3.15.3.3.2.1.9 |