aniDevTrapBsuTempTooLow
DEVTRAPS-MIB ·
.1.3.6.1.4.1.4325.2.10.0.22
Object
notification
This indicates that the temperature on the BSU is below the operating limits. A temperature sensor on the BSU checks the operating temperature of the system board.
Context
- MIB
- DEVTRAPS-MIB
- OID
.1.3.6.1.4.1.4325.2.10.0.22- Type
- notification
- Status
- current
- Parent
- aniDevTraps
- Siblings
- 69
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| aniDevTrapSuSyncAcquired This trap is generated by LKAD when SYNC is acquired. | notification | - | .1.3.6.1.4.1.4325.2.10.0.1 |
| aniDevTrapModemPllNotLocked The Modem PLL (Phase Locked Loop) not locked trap. | notification | - | .1.3.6.1.4.1.4325.2.10.0.10 |
| aniDevTrapModemPllNotLockedClear The Modem PLL (Phase Locked Loop) not locked trap cleared.
This trap is sent out to indicate that the
aniDevTrapModemPllNotLocked alarm is cleared. | notification | - | .1.3.6.1.4.1.4325.2.10.0.11 |
| aniDevTrapRadioVoltReg This trap indicates a Radio Voltage Failure.
It is sent out by both BSU and SU. | notification | - | .1.3.6.1.4.1.4325.2.10.0.12 |
| aniDevTrapRadioVoltRegClear This trap is sent out when aniDevTrapRadioVoltReg
(Radio Voltage Failure) alarm is cleared.
It is sent out by both BSU and SU. | notification | - | .1.3.6.1.4.1.4325.2.10.0.13 |
| aniDevTrapRadioSynthNotLocked This trap is generated when the Radio Synthesizer
is not locked.
It is sent out by BSU and SU. | notification | - | .1.3.6.1.4.1.4325.2.10.0.14 |
| aniDevTrapRadioSynthNotLockedClear This trap is sent out by BSU and SU to indicate that
aniDevTrapRadioSynthNotLocked is cleared. | notification | - | .1.3.6.1.4.1.4325.2.10.0.15 |
| aniDevTrapBsuFanStatus This trap is sent out when a fan on BSU is not
operational. | notification | - | .1.3.6.1.4.1.4325.2.10.0.16 |
| aniDevTrapBsuFanStatusClear This trap is sent to indicate that aniDevTrapBsuFanStatus
is cleared, that is, the fan on BSU is operational again. | notification | - | .1.3.6.1.4.1.4325.2.10.0.17 |
| aniDevTrapBsuDc12vStatus This trap is generated when a 12V DC power failure occurs
on the BSU. | notification | - | .1.3.6.1.4.1.4325.2.10.0.18 |
| aniDevTrapBsuDc12vStatusClear This trap indicates that aniDevTrapBsuDc12vStatus alarm
on the BSU has been cleared. | notification | - | .1.3.6.1.4.1.4325.2.10.0.19 |
| aniDevTrapBsuSuUp This trap is sent out by BSU to report that SU is
operational. | notification | - | .1.3.6.1.4.1.4325.2.10.0.2 |
| aniDevTrapMssPllNotLocked The MSS PLL (Phase Locked Loop) not locked trap
which is sent out by BSU. | notification | - | .1.3.6.1.4.1.4325.2.10.0.20 |
| aniDevTrapMssPllNotLockedClear This trap indicates that aniDevTrapMssPllNotLocked alarm
on the BSU has been cleared. | notification | - | .1.3.6.1.4.1.4325.2.10.0.21 |
| aniDevTrapBsuTempTooHigh This indicates that the temperature on the BSU is above
the operating limits. A temperature sensor on the BSU
checks the operating temperature of the system board. | notification | - | .1.3.6.1.4.1.4325.2.10.0.23 |
| aniDevTrapBsuTempNormal This indicates that the temperature on the BSU is within
the operating limits.
It shows that either the aniDevTrapBsuTempTooLow or
aniDevTrapBsuTempTooHigh alarm on the BSU has … | notification | - | .1.3.6.1.4.1.4325.2.10.0.24 |
| aniDevTrapFlashSpaceTooLow This trap is sent out when the disk space on file system
is too low.
It can be sent out by either BSU or SU. | notification | - | .1.3.6.1.4.1.4325.2.10.0.25 |
| aniDevTrapFlashSpaceNormal This trap is sent out when the disk space on file system
is again normal.
It can be sent out by either BSU or SU to clear the
aniDevTrapFlashSpaceTooLow alarm. | notification | - | .1.3.6.1.4.1.4325.2.10.0.26 |
| aniDevTrapNvramCorrupted This trap is sent out when the NVRAM is corrupted.
64 kB of NVRAM is allocated from the first block
of flash on both BSU and SU. A checksum is maintained
whenever some value if st… | notification | - | .1.3.6.1.4.1.4325.2.10.0.27 |
| aniDevTrapNvramCorruptionClear This trap indicates that aniDevTrapNvramCorrupted
alarm has been cleared. | notification | - | .1.3.6.1.4.1.4325.2.10.0.28 |
| aniDevTrapFileSysCorrupted This trap indicates that the file system
has been corrupted.
It can be sent out by either BSU or SU. | notification | - | .1.3.6.1.4.1.4325.2.10.0.29 |
| aniDevTrapBsuSuDown This trap is sent out by BSU to report that SU is down. | notification | - | .1.3.6.1.4.1.4325.2.10.0.3 |
| aniDevTrapFileSysCorruptionClear This trap indicates that aniDevTrapFileSysCorrupted
alarm has been cleared.
It can be sent out by either BSU or SU. | notification | - | .1.3.6.1.4.1.4325.2.10.0.30 |
| aniDevTrapSmtpConnectFailure This trap is sent out when the connection to the
SMTP server fails.
It can be sent out by either BSU or SU. | notification | - | .1.3.6.1.4.1.4325.2.10.0.31 |
| aniDevTrapSmtpDisabled This trap is sent out when SMTP is disabled on the
system (either BSU or SU). | notification | - | .1.3.6.1.4.1.4325.2.10.0.32 |
| aniDevTrapSwWatchdogReset This trap is sent out when SU is reset by the Software
Watchdog. The Software Watchdog feature detects low memory
and task suspended cases, sends out the trap and reboots
the d… | notification | - | .1.3.6.1.4.1.4325.2.10.0.33 |
| aniDevTrapNatFailure This trap is sent out when NAT failure occurs.
It is sent out by SU. | notification | - | .1.3.6.1.4.1.4325.2.10.0.34 |
| aniDevTrapCurrentImageCorrupted This trap is sent out to indicate that the current image
is corrupted.
It can be sent out by both BSU or SU. | notification | - | .1.3.6.1.4.1.4325.2.10.0.35 |
| aniDevTrapBsuSuFailedReg This trap is sent out when the BSU-SU registration fails. | notification | - | .1.3.6.1.4.1.4325.2.10.0.36 |
| aniDevTrapDefaultConfigFileNotFound This trap is sent out when the default configuration
file is not found.
It can be sent out by both BSU or SU. | notification | - | .1.3.6.1.4.1.4325.2.10.0.37 |
| aniDevTrapCurrentBsuState This trap shows the current BSU State. | notification | - | .1.3.6.1.4.1.4325.2.10.0.38 |
| aniDevTrapCurrentSuState This trap shows the current SU State. | notification | - | .1.3.6.1.4.1.4325.2.10.0.39 |
| aniDevTrapSuBsuUp This trap is sent out by SU to report that BSU is
operational. | notification | - | .1.3.6.1.4.1.4325.2.10.0.4 |
| aniDevTrapMemBufferTooLow This trap is sent out when the memory buffer is too low.
It can be sent out by either BSU or SU. | notification | - | .1.3.6.1.4.1.4325.2.10.0.40 |
| aniDevTrapMemBufferNormal This trap is sent out when the memory buffer is again
normal.
It can be sent out by either BSU or SU to clear the
aniDevMemBufferTooLow alarm. | notification | - | .1.3.6.1.4.1.4325.2.10.0.41 |
| aniDevTrapConfigFileVersionCheckFailure This trap is sent out when there is a problem in the version
of the config file. It is sent out when either the version
information is missing or if there is a mismatch in the
ve… | notification | - | .1.3.6.1.4.1.4325.2.10.0.42 |
| aniDevTrapDefaultFileVersionCheckFailure This trap is sent out when there is a problem in the version
of the default file. It is sent out when either the version
information is missing or if there is a mismatch in the
v… | notification | - | .1.3.6.1.4.1.4325.2.10.0.43 |
| aniDevTrapConfigFileUploadFailure This trap is sent out when the upload of the config file
fails. | notification | - | .1.3.6.1.4.1.4325.2.10.0.44 |
| aniDevTrapConfigFileUploadChecksumFailure This trap is sent out when there is a checksum error
on the config file after the upload. | notification | - | .1.3.6.1.4.1.4325.2.10.0.45 |
| aniDevTrapRunningBaselineImage This trap is sent out when a baseline image is
running. | notification | - | .1.3.6.1.4.1.4325.2.10.0.46 |
| aniDevTrapPowerSupplyFailure This trap is sent out by the BSU when there is a power
supply failure. | notification | - | .1.3.6.1.4.1.4325.2.10.0.48 |
| aniDevTrapPowerSupplyNormal This trap is sent out by the BSU when the power supply is
normal again. It is sent out to indicate that the
aniDevTrapPowerSupplyFailure alarm is cleared. | notification | - | .1.3.6.1.4.1.4325.2.10.0.49 |
| aniDevTrapSuBsuDown This trap is sent out by SU to report that BSU is down. | notification | - | .1.3.6.1.4.1.4325.2.10.0.5 |
| aniDevTrapRealtimeClockFailure This trap is sent out by the BSU when there is a real time
clock failure. | notification | - | .1.3.6.1.4.1.4325.2.10.0.50 |
| aniDevTrapRealtimeClockNormal This trap is sent out by the BSU when the real time clock
is normal again. It is sent out to indicate that the
aniDevTrapRealtimeClockFailure alarm is cleared. | notification | - | .1.3.6.1.4.1.4325.2.10.0.51 |
| aniDevTrapModelNumFailure This trap is sent out when there is an error
related to the model number. | notification | - | .1.3.6.1.4.1.4325.2.10.0.53 |
| aniDevTrapConfigParseFailure This trap is sent out when there is an error in
the parsing of the configuration file. | notification | - | .1.3.6.1.4.1.4325.2.10.0.55 |
| aniDevUpdateInventory This trap is sent out to notify configuration change in
SU customer name. | notification | - | .1.3.6.1.4.1.4325.2.10.0.56 |
| aniDevTrapPppFailure This trap is sent out whenever PPP fails to establish a session. | notification | - | .1.3.6.1.4.1.4325.2.10.0.57 |
| aniDevTrapPppStatus This trap is sent whenever a PPP link goes up or down. | notification | - | .1.3.6.1.4.1.4325.2.10.0.58 |
| aniDevTrapFrequencyChange This trap is sent out whenever the channel frequency
is changed on the BSU and SU while they are in the
operational state. | notification | - | .1.3.6.1.4.1.4325.2.10.0.59 |
| aniDevTrapDhcpFailure This trap is generated when DHCP fails. | notification | - | .1.3.6.1.4.1.4325.2.10.0.6 |
| aniDevTrapPPPoeSessionUp This trap is sent out whenever the when a PPPoE Session comes up. | notification | - | .1.3.6.1.4.1.4325.2.10.0.62 |
| aniDevTrapPPPoeOfferError This trap is sent out whenever the when no valid PPPoE Active Discovery Offer (PADO)
is received in response to a PPPoE Active Discovery Initiation (PADI) packet
or if no valid P… | notification | - | .1.3.6.1.4.1.4325.2.10.0.63 |
| aniDevTrapPPPoeSessionTerminate This trap is sent out when a PPPoE Session is terminated. | notification | - | .1.3.6.1.4.1.4325.2.10.0.64 |
| aniDevTrapEtherAutoNegotiate This trap is sent out when device go back to auto-negotiate mode. | notification | - | .1.3.6.1.4.1.4325.2.10.0.65 |
| aniDevTrapRadioInitError This trap is sent out when the radio can't be initialized.
Under an error condition this event will be generated prior to
SU becoming operational. | notification | - | .1.3.6.1.4.1.4325.2.10.0.66 |
| aniDevTrapMaxPowerError This trap is sent out when when the radio board can't reach maximum
configured power. This can be caused by a combination of faulty
(or very long) coaxial cable connecting IDU an… | notification | - | .1.3.6.1.4.1.4325.2.10.0.67 |
| aniDevTrapMaxPowerErrorClear This trap is sent out when the event aniDevTrapMaxPowerError has been cleared. | notification | - | .1.3.6.1.4.1.4325.2.10.0.68 |
| aniDevTrapAgcTableNotCalibrated This trap is sent out when the AGC Table is not calibrated.
SODU platform relies on accurate calibration of the receive gain
throughout the entire receive chain. If the table is n… | notification | - | .1.3.6.1.4.1.4325.2.10.0.69 |
| aniDevTrapConfigDownloadFailure This trap is generated when Config file download fails. | notification | - | .1.3.6.1.4.1.4325.2.10.0.7 |
| aniDevTrapFreqTableInvalidEntry This trap is sent out whenever the frequency table contains an invalid entry. | notification | - | .1.3.6.1.4.1.4325.2.10.0.70 |
| aniDevTrapHtmlUnzippedError This trap is sent out when html compressed zip files are either missing or
corrupted. | notification | - | .1.3.6.1.4.1.4325.2.10.0.71 |
| aniDevTrapBootLineBackupUpdated This trap is sent out whenever the backup bootline parameters are updated to bring
them in sync with the actual boot parameters. | notification | - | .1.3.6.1.4.1.4325.2.10.0.72 |
| aniDevTrapBootLineRestoredFromBackup This trap is sent out when the main bootline parameters are corrupted
and the system has to fall back on backup boot parameters. | notification | - | .1.3.6.1.4.1.4325.2.10.0.73 |
| aniDevTrapNvramBackupUpdated This trap is sent out whenever the backup copy of NVRAM configuration
parameters is updated to bring them in sync with the actual NVRAM configuration. | notification | - | .1.3.6.1.4.1.4325.2.10.0.74 |
| aniDevTrapNvramRestoredFromBackup This trap is sent out when the main NVRAM configuration data is corrupted
and the system has to fall back on backup NVRAM configuration. | notification | - | .1.3.6.1.4.1.4325.2.10.0.75 |
| aniDevTrapRamTooLow This trap is sent out to indicate that the RAM is
too low. | notification | - | .1.3.6.1.4.1.4325.2.10.0.8 |
| aniDevTrapRamNormal This trap is sent out to indicate that the RAM
available is normal.
This trap is sent out to indicate that the
aniDevTrapRamTooLow alarm is cleared. | notification | - | .1.3.6.1.4.1.4325.2.10.0.9 |