aniDevRouteMetric3
DEVROUTE-MIB ·
.1.3.6.1.4.1.4325.2.9.1.1.5
Object
column
Integer32
An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's aniDevRouteProto value. If this metric is not used, its value should be set to -1.
Context
- MIB
- DEVROUTE-MIB
- OID
.1.3.6.1.4.1.4325.2.9.1.1.5- Type
- column
- Access
- readonly
- Status
- current
- Parent
- aniDevRouteEntry
- Table
- aniDevRouteTable
- Siblings
- 13
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| aniDevRouteDest The destination IP address of this route. An
entry with a value of 0.0.0.0 is considered a
default route. Multiple routes to a single
destination can appear in the table. | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.4325.2.9.1.1.1 |
| aniDevRouteAge The number of seconds since this route was last
updated or otherwise determined to be correct.
Note that no semantics of `too old' can be implied
except through knowledge of the r… | column | Integer32 | .1.3.6.1.4.1.4325.2.9.1.1.10 |
| aniDevRouteMask Indicate the mask to be logical-ANDed with the
destination address before being compared to the
value in the aniDevRouteDest field. For those systems
that do not support arbitrar… | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.4325.2.9.1.1.11 |
| aniDevRouteMetric5 An alternate routing metric for this route. The
semantics of this metric are determined by the
routing-protocol specified in the route's
aniDevRouteProto value. If this metric i… | column | Integer32 | .1.3.6.1.4.1.4325.2.9.1.1.12 |
| aniDevRouteInfo A reference to MIB definitions specific to the
particular routing protocol which is responsible
for this route, as determined by the value
specified in the route's aniDevRouteProt… | column | ObjectIdentifier | .1.3.6.1.4.1.4325.2.9.1.1.13 |
| aniDevRouteFlag The flag to be associated with this particular
route entry.
While adding a network route, set this value to
network(1). When a host route is being added, this
value is set to hos… | column | Enumeration | .1.3.6.1.4.1.4325.2.9.1.1.14 |
| aniDevRouteIfIndex The index value which uniquely identifies the
local interface through which the next hop of this
route should be reached. The interface identified
by a particular value of this i… | column | Integer32 | .1.3.6.1.4.1.4325.2.9.1.1.2 |
| aniDevRouteMetric1 The primary routing metric for this route. The
semantics of this metric are determined by the
routing-protocol specified in the route's
aniDevRouteProto value. If this metric is… | column | Integer32 | .1.3.6.1.4.1.4325.2.9.1.1.3 |
| aniDevRouteMetric2 An alternate routing metric for this route. The
semantics of this metric are determined by the
routing-protocol specified in the route's
aniDevRouteProto value. If this metric i… | column | Integer32 | .1.3.6.1.4.1.4325.2.9.1.1.4 |
| aniDevRouteMetric4 An alternate routing metric for this route. The
semantics of this metric are determined by the
routing-protocol specified in the route's
aniDevRouteProto value. If this metric i… | column | Integer32 | .1.3.6.1.4.1.4325.2.9.1.1.6 |
| aniDevRouteNextHop The IP address of the next hop of this route.
(In the case of a route bound to an interface
which is realized via a broadcast media, the value
of this field is the agent's IP addr… | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.4325.2.9.1.1.7 |
| aniDevRouteType The type of route.
Currently, aniDevRouteType cannot be set to anything
other than invalid(2).
Setting this object to the value invalid(2) has
the effect of deleti… | column | Enumeration | .1.3.6.1.4.1.4325.2.9.1.1.8 |
| aniDevRouteProto The routing mechanism via which this route was
learned. Inclusion of values for gateway routing
protocols is not intended to imply that hosts
should support those protocols. | column | Enumeration | .1.3.6.1.4.1.4325.2.9.1.1.9 |