nbsDevProperties
DEV-CFG-MIB ·
.1.3.6.1.4.1.629.1.50.11.1.5
Object
scalar
Enumeration
Additional Device Properties.
This MIB Object is created as a Bits Mask,
when the corresponding Bit says about the
specific property.
value=0 : If no additional properties exist.
value=1 : If Device have a Redundant Power Supply.
value=2 : If Device can include the High Density Fibre Ports.
value=4 : If Device have a Direct Current (DC) Power Supply for
extreme temperature conditions.
value=8 : If Device is of the OptiSwitch_100FX Type
(fixed schema of the OptiSwitch_400 Device).
value=16: If Device is of the Cheap Modification.
value=32: If Device is of the Expensive Modification.
value=64: If Device is of 'Telco' SubType.
value=128: If Device is built to working in the Extended Temperature range.
value=256: If If Device is built to working in the Extra Extended Temperature range.
value=512: If Device supports PTP slave synchronization.
For example: If Device have a the both properties
(Redundant Power Supply & High Density Fiber Ports), value=3
will be responded on the GET SNMP command (etc...).
Context
- MIB
- DEV-CFG-MIB
- OID
.1.3.6.1.4.1.629.1.50.11.1.5- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- nbDevGen
- Siblings
- 15
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | none |
1 | redundantPowerSupply |
2 | highDensityFibrePorts |
4 | dcPowerSupply |
8 | optiSwitch100FX |
16 | chipModification |
32 | expensiveModification |
64 | telcoSubType |
128 | extendedTempRange |
256 | extraExtendedTempRange |
512 | ptpSlaveSync |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| nbDevOperationMode The Operational mode of Device. This is for internal usage. | scalar | Enumeration | .1.3.6.1.4.1.629.1.50.11.1.1 |
| nbsDevCPU | node | - | .1.3.6.1.4.1.629.1.50.11.1.10 |
| nbsDevFAN | node | - | .1.3.6.1.4.1.629.1.50.11.1.11 |
| nbsDevHeaterStatus The Heater Status of Device. | scalar | Enumeration | .1.3.6.1.4.1.629.1.50.11.1.12 |
| nbsDevPhysParams | node | - | .1.3.6.1.4.1.629.1.50.11.1.13 |
| nbsDevPSHost | node | - | .1.3.6.1.4.1.629.1.50.11.1.14 |
| nbsDevTemperatureProfile The Temperature profile of Device. | scalar | Enumeration | .1.3.6.1.4.1.629.1.50.11.1.15 |
| nbDevErrorText This is the text of the last error that the agent found.
it is sent to the RS232 port, and it used by the manager
to show the cause of the last error. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.629.1.50.11.1.2 |
| nbsDevTftpMode The TFTP Download Process mode of the Device.
The 'client' mode is a default. | scalar | Enumeration | .1.3.6.1.4.1.629.1.50.11.1.3 |
| nbDevRouterSaveConfig If operation SET is issued with value saveConfig(1), all
configuration is to be saved in relevant configuration files;
SET with value warmReset(2) causes only a restart of the
the… | scalar | Enumeration | .1.3.6.1.4.1.629.1.50.11.1.4 |
| nbsDevTrapVars | node | - | .1.3.6.1.4.1.629.1.50.11.1.50 |
| nbsDevTemperatureMode The Temperature Mode of Device. | scalar | Enumeration | .1.3.6.1.4.1.629.1.50.11.1.6 |
| nbsDevResetAfterDnldMode Device Reset Mode after Download process.
In case of 'yes'(2) the Reset will be created
immediately after the Download process will
successfuly finish;
In case of 'no'(3) the Re… | scalar | Enumeration | .1.3.6.1.4.1.629.1.50.11.1.7 |
| nbsDevPS | node | - | .1.3.6.1.4.1.629.1.50.11.1.8 |
| nbsDevPSInput | node | - | .1.3.6.1.4.1.629.1.50.11.1.9 |