swL2IGMPLeaveTimer

DES3526-L2MGMT-MIB · .1.3.6.1.4.1.171.11.64.1.2.10.3.1.8

MIB view Table view

Object

column r/w Integer32

When a query receives a Leave Group message for a group that
has group members on the reception interface, it sends
Group-Specific Queries every swL2IGMPLeaveTimer to the group
being left.

Context

MIB: DES3526-L2MGMT-MIB
OID: .1.3.6.1.4.1.171.11.64.1.2.10.3.1.8
Type: column
Access: readwrite
Status: current
Parent: swL2IGMPCtrlEntry
Table: swL2IGMPCtrlTable
Siblings: 10

Syntax

Integer32

Values & Constraints

Object Constraints

range: 0-16711450

Related Objects

Sibling Objects

Object	Type	Syntax	OID
swL2IGMPCtrlVid This object indicates the IGMP control entry's VLAN ID. If VLAN is disabled, the VID is always 0 and cannot be changed by management users. If VLAN is in Port-Base mode, the VID i…	column	Integer32	`.1.3.6.1.4.1.171.11.64.1.2.10.3.1.1`
swL2IGMPCurrentState This object indicates the current IGMP query state.	column	Enumeration	`.1.3.6.1.4.1.171.11.64.1.2.10.3.1.10`
swL2IGMPCtrlState This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different for eac…	column	Enumeration	`.1.3.6.1.4.1.171.11.64.1.2.10.3.1.11`
swL2IGMPQueryInterval The frequency at which the IGMP Host-Query packets are transmitted on this switch.	column	Integer32	`.1.3.6.1.4.1.171.11.64.1.2.10.3.1.2`
swL2IGMPMaxResponseTime The maximum query response time on this switch.	column	Integer32	`.1.3.6.1.4.1.171.11.64.1.2.10.3.1.3`
swL2IGMPRobustness The Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to have a high loss, the Robustness Variable may be increased. IGMP is robu…	column	Integer32	`.1.3.6.1.4.1.171.11.64.1.2.10.3.1.4`
swL2IGMPLastMemberQueryInterval The Last Member Query Interval is the Max Response Time inserted into Group-Specific Queries sent in response to Leave Group messages, and is also the amount of time between Group…	column	Integer32	`.1.3.6.1.4.1.171.11.64.1.2.10.3.1.5`
swL2IGMPHostTimeout The timer value for sending IGMP query packet when none was sent by the host in the LAN. The timer works in per-VLAN basis. Our device will be activated to send the query message …	column	Integer32	`.1.3.6.1.4.1.171.11.64.1.2.10.3.1.6`
swL2IGMPRouteTimeout The Router Timeout is how long a host must wait after hearing a Query before it may send any IGMPv2 messages.	column	Integer32	`.1.3.6.1.4.1.171.11.64.1.2.10.3.1.7`
swL2IGMPQueryState This object decides if the IGMP query is enabled or disabled.	column	Enumeration	`.1.3.6.1.4.1.171.11.64.1.2.10.3.1.9`