aclv6L3RuleFilterTimeRange

DES-1210-28MEbx · .1.3.6.1.4.1.171.10.75.15.2.15.3.2.1.29
MIB view Table view

Object

column r/w OctetString 
ACL IPV6 L3 Filter Time Range

Context

MIB
DES-1210-28MEbx
OID
.1.3.6.1.4.1.171.10.75.15.2.15.3.2.1.29
Type
column
Access
readwrite
Status
current
Parent
aclv6L3RuleEntry
Table
aclv6L3RuleTable
Siblings
28

Syntax

OctetString

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
aclv6L3RuleAccessID
L3 Filter rule ID. 0 means auto assign.
columnInteger32.1.3.6.1.4.1.171.10.75.15.2.15.3.2.1.1
aclv6L3RuleSrcIpAddrMask
The IP subnet mask for Source IP address. This field is read-only and copy from it's Profile setting.
columnIpv6Address.1.3.6.1.4.1.171.10.75.15.2.15.3.2.1.10
aclv6L3RuleTcpUdpDstPort
The TCP / UDP destination port. The default value is -1, which means the rule don't care this condition.
columnInteger32.1.3.6.1.4.1.171.10.75.15.2.15.3.2.1.11
aclv6L3RuleTcpUdpSrcPort
The TCP / UDP source port. The default value is -1, which means the rule don't care this condition.
columnInteger32.1.3.6.1.4.1.171.10.75.15.2.15.3.2.1.12
aclv6L3RuleTcpUdpDstPortMask
The TCP / UDP Destination port Mask. This field is read-only and copy from it's Profile setting.
columnOctetString.1.3.6.1.4.1.171.10.75.15.2.15.3.2.1.13
aclv6L3RuleTcpUdpSrcPortMask
The TCP / UDP Source port Mask. This field is read-only and copy from it's Profile setting.
columnOctetString.1.3.6.1.4.1.171.10.75.15.2.15.3.2.1.14
aclv6L3RuleTcpAckBit
The TCP ACK bit to be checked against the packet. The default value is 'dont_care'(-1), which means the rule don't care this condition.
columnEnumeration.1.3.6.1.4.1.171.10.75.15.2.15.3.2.1.15
aclv6L3RuleTcpRstBit
The TCP RST bit to be checked against the packet. The default value is 'dont_care'(-1), which means the rule don't care this condition.
columnEnumeration.1.3.6.1.4.1.171.10.75.15.2.15.3.2.1.16
aclv6L3RuleTcpUrgBit
The TCP Urg bit to be checked against the packet. The default value is 'dont_care'(-1), which means the rule don't care this condition.
columnEnumeration.1.3.6.1.4.1.171.10.75.15.2.15.3.2.1.17
aclv6L3RuleTcpPshBit
The TCP Psh bit to be checked against the packet. The default value is 'dont_care'(-1). which means the rule don't care this condition.
columnEnumeration.1.3.6.1.4.1.171.10.75.15.2.15.3.2.1.18
aclv6L3RuleTcpSynBit
The TCP Syn bit to be checked against the packet. The default value is 'dont_care'(-1), which means the rule don't care this condition.
columnEnumeration.1.3.6.1.4.1.171.10.75.15.2.15.3.2.1.19
aclv6L3RuleProfileNo
The Profile ID which this rule join.
columnInteger32.1.3.6.1.4.1.171.10.75.15.2.15.3.2.1.2
aclv6L3RuleTcpFinBit
The TCP Fin bit to be checked against the packet. The default value is 'dont_care'(-1), which means the rule don't care this condition.
columnEnumeration.1.3.6.1.4.1.171.10.75.15.2.15.3.2.1.20
aclv6L3RuleTrafficClass
The IP Dscp value to be checked against the packet. A default value is '-1', which means the rule don't care this condition.
columnInteger32.1.3.6.1.4.1.171.10.75.15.2.15.3.2.1.21
aclv6L3RulePortList
Specifies the complete set of ports over which if the packet arrives this filter rule will be applicable.
columnPortList.1.3.6.1.4.1.171.10.75.15.2.15.3.2.1.23
aclv6L3RuleAction
Specifies the action to be taken on the packet if the filter rule matches.
columnEnumeration.1.3.6.1.4.1.171.10.75.15.2.15.3.2.1.24
aclv6L3RuleRateLimit
Rate limit for matched packet.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.171.10.75.15.2.15.3.2.1.25
aclv6L3RuleReplaceDSCP
Replace DSCP for matched packet.
columnInteger32.1.3.6.1.4.1.171.10.75.15.2.15.3.2.1.26
aclv6L3RuleReplace1P
Replace DSCP for matched packet.
columnInteger32.1.3.6.1.4.1.171.10.75.15.2.15.3.2.1.27
aclv6L3RuleReplaceQueue
Acl IPV6 L3 Rule Replace Queue.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.171.10.75.15.2.15.3.2.1.28
aclv6L3RuleProtocol
The type of protocol to be checked against the packet.
columnEnumeration.1.3.6.1.4.1.171.10.75.15.2.15.3.2.1.3
aclv6L3RuleProtocolMask
The IP protocol mask. This field is read-only and copy from it's Profile setting. It will work with the other field,aclL3RuleProtocol, to caculate a range of IP protocol which is…
columnOctetString.1.3.6.1.4.1.171.10.75.15.2.15.3.2.1.4
aclv6L3RuleICMPMessageType
The message type to be checked against the packet. If the message type matches with the packet, then the packet will be dropped / allowed based on the action set in aclL3RuleActio…
columnInteger32.1.3.6.1.4.1.171.10.75.15.2.15.3.2.1.5
aclv6L3RuleICMPMessageCode
The message code to be checked against the packet. If the packet matches with the message code, then the packet will be dropped / allowed based on the action set in aclL3RuleActio…
columnInteger32.1.3.6.1.4.1.171.10.75.15.2.15.3.2.1.6
aclv6L3RuleDstIpAddr
Destination IP address to be matched with the packet. The default value will be zero, which means the rule don't care this condition.
columnIpv6Address.1.3.6.1.4.1.171.10.75.15.2.15.3.2.1.7
aclv6L3RuleSrcIpAddr
Source IP address to be matched with the packet. The default value will be zero, which means the rule don't care this condition.
columnIpv6Address.1.3.6.1.4.1.171.10.75.15.2.15.3.2.1.8
aclv6L3RuleDstIpAddrMask
The IP subnet mask for Destination IP address. This field is read-only and copy from it's Profile setting.
columnIpv6Address.1.3.6.1.4.1.171.10.75.15.2.15.3.2.1.9
aclv6L3RuleStatus
This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of th…
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.171.10.75.15.2.15.3.2.1.99