aclL2RuleVlanIdMask

DES-1210-28MEbx · .1.3.6.1.4.1.171.10.75.15.2.15.2.1.1.17
MIB view Table view

Object

column r/w OctetString 
Vlan Id to be filtered. In case of Provider bridges, This Vlan Id will
be treated as customer Vlan Id. By Default, the value will be '-1', 
which means the rule don't care this condition.

Context

MIB
DES-1210-28MEbx
OID
.1.3.6.1.4.1.171.10.75.15.2.15.2.1.1.17
Type
column
Access
readwrite
Status
current
Parent
aclL2RuleEntry
Table
aclL2RuleTable
Siblings
17

Syntax

OctetString

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
aclL2AccessID
L2 Filter rule ID. 0 means auto assign.
columnInteger32.1.3.6.1.4.1.171.10.75.15.2.15.2.1.1.1
aclL2RuleInPortList
Specifies the complete set of ports over which this filter is applied for packets ingress at ports in this list.
columnPortList.1.3.6.1.4.1.171.10.75.15.2.15.2.1.1.10
aclL2RuleAction
Specifies the action to be taken on the packet if the filter rule matches. If the action is 'allow', the packet will be forwarded according to the forwarding rules. If the action …
columnEnumeration.1.3.6.1.4.1.171.10.75.15.2.15.2.1.1.11
aclL2RuleRateLimit
Rate limit for matched packet.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.171.10.75.15.2.15.2.1.1.12
aclL2RuleReplaceDSCP
Replace DSCP for matched packet.
columnInteger32.1.3.6.1.4.1.171.10.75.15.2.15.2.1.1.13
aclL2RuleReplace1P
Replace DSCP for matched packet.
columnInteger32.1.3.6.1.4.1.171.10.75.15.2.15.2.1.1.14
aclL2RuleReplaceQueue
ACL L2 Rule Replace Queue.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.171.10.75.15.2.15.2.1.1.15
aclL2RuleFilterTimeRange
ACL L2 Filter Time Range
columnOctetString.1.3.6.1.4.1.171.10.75.15.2.15.2.1.1.16
aclL2ProfileID
ACL Profile ID which this rule join.
columnInteger32.1.3.6.1.4.1.171.10.75.15.2.15.2.1.1.2
aclL2RuleEtherType
The value in the Type/Len field of a frame that will be matched to trigger this filter. The default value of this object is '-1', which means the rule don't care this condition.
columnInteger32.1.3.6.1.4.1.171.10.75.15.2.15.2.1.1.3
aclL2RuleDstMacAddr
Destination MAC address to be matched with the packet. By Default, the Destination Mac Address will be zero,which means the rule don't care this condition.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.171.10.75.15.2.15.2.1.1.4
aclL2RuleSrcMacAddr
Source MAC address to be matched with the packet. By Default, the Source Mac Address will be zero, which means the rule don't care this condition.. address
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.171.10.75.15.2.15.2.1.1.5
aclL2RuleVlanId
Vlan Id to be filtered. In case of Provider bridges, This Vlan Id will be treated as customer Vlan Id. By Default, the value will be '-1', which means the rule don't care this co…
columnInteger32.1.3.6.1.4.1.171.10.75.15.2.15.2.1.1.6
aclL2Rule1pPriority
802.1p priority to be matched with the packet. By Default, the value will be '-1', which means the rule don't care this condition.
columnInteger32.1.3.6.1.4.1.171.10.75.15.2.15.2.1.1.7
aclL2RuleDstMacAddrMask
The MAC address Mask work for Destination MAC address. This field is read-only and copy from it's Profile setting.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.171.10.75.15.2.15.2.1.1.8
aclL2RuleSrcMacAddrMask
The MAC address Mask work for Source MAC address. This field is read-only and copy from it's Profile setting.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.171.10.75.15.2.15.2.1.1.9
aclL2RuleStatus
This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of th…
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.171.10.75.15.2.15.2.1.1.99