a8Chassidentify

DELLBASEBOARDMIF-MIB · .1.3.6.1.4.1.674.10890.1.1.8.1.16
MIB view Table view

Object

column mandatory r/w DmiDisplaystring 
This attribute is used to visually identify a disk pod or
other chassis by causing its lights to flash. Setting this value to non-zero
turns on the identify, setting it back to zero turns it off.

Context

MIB
DELLBASEBOARDMIF-MIB
OID
.1.3.6.1.4.1.674.10890.1.1.8.1.16
Type
column
Access
readwrite
Status
mandatory
Parent
eChassisExtension
Table
tChassisExtension
Siblings
18

Syntax

DmiDisplaystring
Source
DmiDisplaystring
Base type
OctetString

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
a8Chassindex mandatory
Physical container index
columnDmiInteger.1.3.6.1.4.1.674.10890.1.1.8.1.1
a8Chassampprobes mandatory
This contains the statuses of all amp probes in the system, one probe per octet. The value of each octet is the value of the status field.
columnDmiOctetstring.1.3.6.1.4.1.674.10890.1.1.8.1.10
a8Chasspsstatus mandatory
Global status of power supplies.
columnEnumeration.1.3.6.1.4.1.674.10890.1.1.8.1.11
a8Chasspwrsupplies mandatory
This contains the statuses of all power supplies in the system, one probe per octet. The value of each octet is the value of the status field.
columnDmiOctetstring.1.3.6.1.4.1.674.10890.1.1.8.1.12
a8Chassservicetag mandatory
This is the service tag for this chassis, if it exists.
columnDmiDisplaystring.1.3.6.1.4.1.674.10890.1.1.8.1.13
a8Chassuid mandatory
This is the Unique ID for this chassis, if it exists.
columnDmiDisplaystring.1.3.6.1.4.1.674.10890.1.1.8.1.14
a8Chassbackplaneuid mandatory
This is the Unique ID for the backplane in this chassis.
columnDmiDisplaystring.1.3.6.1.4.1.674.10890.1.1.8.1.15
a8Chassfancontrol mandatory
This attribute is used to control the fan speed in a chassis. If the value is 0, then fan control is notavailable. A value of 2 indicates maximum cooling. Avalue of 1 indicates …
columnDmiDisplaystring.1.3.6.1.4.1.674.10890.1.1.8.1.17
a8Chassledconfig mandatory
This attribute is used to configure which fault conditionscause the fault LED to flash. If the value is 0, thenthis feature is not available. A value of 16 indicatesflash for fai…
columnDmiDisplaystring.1.3.6.1.4.1.674.10890.1.1.8.1.18
a8Chassfaultclear mandatory
This attribute is used to clear the hard drive fault LED.If this value is non-zero, then it is available. Writingany value to this attribut will clear the hard drive faultLED.
columnDmiDisplaystring.1.3.6.1.4.1.674.10890.1.1.8.1.19
a8Chassglobstatus mandatory
Global status of all devices in chassis.
columnEnumeration.1.3.6.1.4.1.674.10890.1.1.8.1.2
a8Chasstempstatus mandatory
Global status of temperature probes.
columnEnumeration.1.3.6.1.4.1.674.10890.1.1.8.1.3
a8Chasstempprobes mandatory
This contains the statuses of all temp probes in the system, one probe per octet. The value of each octet is the value of the status field.
columnDmiOctetstring.1.3.6.1.4.1.674.10890.1.1.8.1.4
a8Chassfansstatus mandatory
Global status of fan sensors.
columnEnumeration.1.3.6.1.4.1.674.10890.1.1.8.1.5
a8Chassfansprobes mandatory
This contains the statuses of all fan probes in the system, one probe per octet. The value of each octet is the value of the status field.
columnDmiOctetstring.1.3.6.1.4.1.674.10890.1.1.8.1.6
a8Chassvoltstatus mandatory
Global status of voltage probes.
columnEnumeration.1.3.6.1.4.1.674.10890.1.1.8.1.7
a8Chassvoltprobes mandatory
This contains the statuses of all volt probes in the system, one probe per octet. The value of each octet is the value of the status field.
columnDmiOctetstring.1.3.6.1.4.1.674.10890.1.1.8.1.8
a8Chassampstatus mandatory
Global status of current probes.
columnEnumeration.1.3.6.1.4.1.674.10890.1.1.8.1.9