a8Chassfancontrol
DELLBASEBOARDMIF-MIB ·
.1.3.6.1.4.1.674.10890.1.1.8.1.17
Object
column
mandatory
r/w
DmiDisplaystring
This attribute is used to control the fan speed in a chassis. If the value is 0, then fan control is notavailable. A value of 2 indicates maximum cooling. Avalue of 1 indicates minimize fan noise (and speed).
Context
- MIB
- DELLBASEBOARDMIF-MIB
- OID
.1.3.6.1.4.1.674.10890.1.1.8.1.17- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- eChassisExtension
- Table
- tChassisExtension
- Siblings
- 18
Syntax
DmiDisplaystring
- Source
- DmiDisplaystring
- Base type
OctetString
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| a8Chassindex mandatory Physical container index | column | DmiInteger | .1.3.6.1.4.1.674.10890.1.1.8.1.1 |
| a8Chassampprobes mandatory This contains the statuses of all amp probes in the system,
one probe per octet. The value of each octet is the value of the status
field. | column | DmiOctetstring | .1.3.6.1.4.1.674.10890.1.1.8.1.10 |
| a8Chasspsstatus mandatory Global status of power supplies. | column | Enumeration | .1.3.6.1.4.1.674.10890.1.1.8.1.11 |
| a8Chasspwrsupplies mandatory This contains the statuses of all power supplies in the system,
one probe per octet. The value of each octet is the value of the status
field. | column | DmiOctetstring | .1.3.6.1.4.1.674.10890.1.1.8.1.12 |
| a8Chassservicetag mandatory This is the service tag for this chassis, if it exists. | column | DmiDisplaystring | .1.3.6.1.4.1.674.10890.1.1.8.1.13 |
| a8Chassuid mandatory This is the Unique ID for this chassis, if it exists. | column | DmiDisplaystring | .1.3.6.1.4.1.674.10890.1.1.8.1.14 |
| a8Chassbackplaneuid mandatory This is the Unique ID for the backplane in this chassis. | column | DmiDisplaystring | .1.3.6.1.4.1.674.10890.1.1.8.1.15 |
| a8Chassidentify mandatory This attribute is used to visually identify a disk pod or
other chassis by causing its lights to flash. Setting this value to non-zero
turns on the identify, setting it back to ze… | column | DmiDisplaystring | .1.3.6.1.4.1.674.10890.1.1.8.1.16 |
| a8Chassledconfig mandatory This attribute is used to configure which fault conditionscause
the fault LED to flash. If the value is 0, thenthis feature is not available.
A value of 16 indicatesflash for fai… | column | DmiDisplaystring | .1.3.6.1.4.1.674.10890.1.1.8.1.18 |
| a8Chassfaultclear mandatory This attribute is used to clear the hard drive fault LED.If
this value is non-zero, then it is available. Writingany value to this attribut
will clear the hard drive faultLED. | column | DmiDisplaystring | .1.3.6.1.4.1.674.10890.1.1.8.1.19 |
| a8Chassglobstatus mandatory Global status of all devices in chassis. | column | Enumeration | .1.3.6.1.4.1.674.10890.1.1.8.1.2 |
| a8Chasstempstatus mandatory Global status of temperature probes. | column | Enumeration | .1.3.6.1.4.1.674.10890.1.1.8.1.3 |
| a8Chasstempprobes mandatory This contains the statuses of all temp probes in the system,
one probe per octet. The value of each octet is the value of the status
field. | column | DmiOctetstring | .1.3.6.1.4.1.674.10890.1.1.8.1.4 |
| a8Chassfansstatus mandatory Global status of fan sensors. | column | Enumeration | .1.3.6.1.4.1.674.10890.1.1.8.1.5 |
| a8Chassfansprobes mandatory This contains the statuses of all fan probes in the system,
one probe per octet. The value of each octet is the value of the status
field. | column | DmiOctetstring | .1.3.6.1.4.1.674.10890.1.1.8.1.6 |
| a8Chassvoltstatus mandatory Global status of voltage probes. | column | Enumeration | .1.3.6.1.4.1.674.10890.1.1.8.1.7 |
| a8Chassvoltprobes mandatory This contains the statuses of all volt probes in the system,
one probe per octet. The value of each octet is the value of the status
field. | column | DmiOctetstring | .1.3.6.1.4.1.674.10890.1.1.8.1.8 |
| a8Chassampstatus mandatory Global status of current probes. | column | Enumeration | .1.3.6.1.4.1.674.10890.1.1.8.1.9 |