a8Chassampprobes
DELLBASEBOARDMIF-MIB ·
.1.3.6.1.4.1.674.10890.1.1.8.1.10
Object
column
mandatory
DmiOctetstring
This contains the statuses of all amp probes in the system, one probe per octet. The value of each octet is the value of the status field.
Context
- MIB
- DELLBASEBOARDMIF-MIB
- OID
.1.3.6.1.4.1.674.10890.1.1.8.1.10- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- eChassisExtension
- Table
- tChassisExtension
- Siblings
- 18
Syntax
DmiOctetstring
- Source
- DmiOctetstring
- Base type
OctetString
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| a8Chassindex mandatory Physical container index | column | DmiInteger | .1.3.6.1.4.1.674.10890.1.1.8.1.1 |
| a8Chasspsstatus mandatory Global status of power supplies. | column | Enumeration | .1.3.6.1.4.1.674.10890.1.1.8.1.11 |
| a8Chasspwrsupplies mandatory This contains the statuses of all power supplies in the system,
one probe per octet. The value of each octet is the value of the status
field. | column | DmiOctetstring | .1.3.6.1.4.1.674.10890.1.1.8.1.12 |
| a8Chassservicetag mandatory This is the service tag for this chassis, if it exists. | column | DmiDisplaystring | .1.3.6.1.4.1.674.10890.1.1.8.1.13 |
| a8Chassuid mandatory This is the Unique ID for this chassis, if it exists. | column | DmiDisplaystring | .1.3.6.1.4.1.674.10890.1.1.8.1.14 |
| a8Chassbackplaneuid mandatory This is the Unique ID for the backplane in this chassis. | column | DmiDisplaystring | .1.3.6.1.4.1.674.10890.1.1.8.1.15 |
| a8Chassidentify mandatory This attribute is used to visually identify a disk pod or
other chassis by causing its lights to flash. Setting this value to non-zero
turns on the identify, setting it back to ze… | column | DmiDisplaystring | .1.3.6.1.4.1.674.10890.1.1.8.1.16 |
| a8Chassfancontrol mandatory This attribute is used to control the fan speed in a chassis.
If the value is 0, then fan control is notavailable. A value of 2 indicates
maximum cooling. Avalue of 1 indicates … | column | DmiDisplaystring | .1.3.6.1.4.1.674.10890.1.1.8.1.17 |
| a8Chassledconfig mandatory This attribute is used to configure which fault conditionscause
the fault LED to flash. If the value is 0, thenthis feature is not available.
A value of 16 indicatesflash for fai… | column | DmiDisplaystring | .1.3.6.1.4.1.674.10890.1.1.8.1.18 |
| a8Chassfaultclear mandatory This attribute is used to clear the hard drive fault LED.If
this value is non-zero, then it is available. Writingany value to this attribut
will clear the hard drive faultLED. | column | DmiDisplaystring | .1.3.6.1.4.1.674.10890.1.1.8.1.19 |
| a8Chassglobstatus mandatory Global status of all devices in chassis. | column | Enumeration | .1.3.6.1.4.1.674.10890.1.1.8.1.2 |
| a8Chasstempstatus mandatory Global status of temperature probes. | column | Enumeration | .1.3.6.1.4.1.674.10890.1.1.8.1.3 |
| a8Chasstempprobes mandatory This contains the statuses of all temp probes in the system,
one probe per octet. The value of each octet is the value of the status
field. | column | DmiOctetstring | .1.3.6.1.4.1.674.10890.1.1.8.1.4 |
| a8Chassfansstatus mandatory Global status of fan sensors. | column | Enumeration | .1.3.6.1.4.1.674.10890.1.1.8.1.5 |
| a8Chassfansprobes mandatory This contains the statuses of all fan probes in the system,
one probe per octet. The value of each octet is the value of the status
field. | column | DmiOctetstring | .1.3.6.1.4.1.674.10890.1.1.8.1.6 |
| a8Chassvoltstatus mandatory Global status of voltage probes. | column | Enumeration | .1.3.6.1.4.1.674.10890.1.1.8.1.7 |
| a8Chassvoltprobes mandatory This contains the statuses of all volt probes in the system,
one probe per octet. The value of each octet is the value of the status
field. | column | DmiOctetstring | .1.3.6.1.4.1.674.10890.1.1.8.1.8 |
| a8Chassampstatus mandatory Global status of current probes. | column | Enumeration | .1.3.6.1.4.1.674.10890.1.1.8.1.9 |