phivControlPollingState
DECNET-PHIV-MIB ·
.1.3.6.1.2.1.18.8.5.1.10
Object
column
mandatory
r/w
Enumeration
This value represents the state of the tributary
relative to the multipoint polling algorithm. If not
set the default is AUTOMATIC. The possible states are:
AUTOMATIC
The tributary's state is allowed to vary according to
the operation of the polling algorithm.
ACTIVE/INACTIVE/DYING/DEAD
The tributary is locked in the specified state.
NOTE: These values are incremented by one compared to
the standard DECnet values in order to maintain
compliance with RFC 1155.
Context
- MIB
- DECNET-PHIV-MIB
- OID
.1.3.6.1.2.1.18.8.5.1.10- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- phivControlParametersEntry
- Table
- phivControlParametersTable
- Siblings
- 11
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | automatic |
2 | active |
3 | inactive |
4 | dying |
5 | dead |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| phivControlCircuitIndex mandatory A unique index value for each known multipoint
control circuit.
This is the same value as phivCircuitIndex. | column | Integer32 | .1.3.6.1.2.1.18.8.5.1.1 |
| phivControlPollingSubState mandatory This value represents the tributary's state as
determined by the polling algorithm. This applies
only when the polling state is AUTOMATIC and is
read-only to Network Management. … | column | Enumeration | .1.3.6.1.2.1.18.8.5.1.11 |
| phivControlTransTimer mandatory This value represents the number of milliseconds to
delay between data message transmits. Milliseconds is
a decimal integer in the range 0-65535. | column | Integer32 | .1.3.6.1.2.1.18.8.5.1.12 |
| phivControlBabbleTimer mandatory This value represents the number of milliseconds that a
selected tributary or remote half-duplex station is
allowed to transmit. | column | Integer32 | .1.3.6.1.2.1.18.8.5.1.2 |
| phivControlMaxBuffs mandatory This value represents the maximum number of buffers the
tributary can use from a common buffer pool. If not
set, there is no common buffer pool and buffers are
explicitly supplied… | column | Integer32 | .1.3.6.1.2.1.18.8.5.1.3 |
| phivControlMaxTransmits mandatory This value represents the maximum number of data
messages that can be transmitted at one time. Count
is a decimal integer in the range 1-255. | column | Integer32 | .1.3.6.1.2.1.18.8.5.1.4 |
| phivControlDyingBase mandatory This value represents the base priority to which a
tributary is reset each time it has been polled. A
separate base can be set for each of the indicated
polling states. Base is a … | column | Integer32 | .1.3.6.1.2.1.18.8.5.1.5 |
| phivControlDyingIncrement mandatory This value represents the increment added to the
tributary priority each time the scheduling timer
expires. If not set, the defaults are: active, 0;
inactive, 64; and dying, 16. | column | Integer32 | .1.3.6.1.2.1.18.8.5.1.6 |
| phivControlDeadThreshold mandatory This value represents the number of times to poll the
active, inactive, or dying tributary before changing
its polling state to dead because of receive timeouts.
Count is a decima… | column | Integer32 | .1.3.6.1.2.1.18.8.5.1.7 |
| phivControlDyingThreshold mandatory This value represents the number of times to poll the
active or inactive tributary before changing its
polling state to dying because of receive timeouts.
Count is a decimal integ… | column | Integer32 | .1.3.6.1.2.1.18.8.5.1.8 |
| phivControlInactTreshold mandatory This value represents the number of times to poll the
active tributary before changing its polling state to
inactive because of no data response. Count is a
decimal integer in the… | column | Integer32 | .1.3.6.1.2.1.18.8.5.1.9 |