transceiverSn
DCN-MIB ·
.1.3.6.1.4.1.6339.100.3.2.1.28
Object
column
OctetString
serial num of transceiver.if port is not a transceiver,value is null.
Context
- MIB
- DCN-MIB
- OID
.1.3.6.1.4.1.6339.100.3.2.1.28- Type
- column
- Access
- readonly
- Status
- current
- Parent
- priPortEntry
- Table
- portTable
- Siblings
- 29
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-16
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| portIndex port No. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6339.100.3.2.1.1 |
| transmitBandwidth The transmit bandwidth of the port. Its unit is kbs.
Set 0 is no bandwidth. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6339.100.3.2.1.10 |
| shutdown Close or open to specify the port. | column | Enumeration | .1.3.6.1.4.1.6339.100.3.2.1.12 |
| loopback Open or close to specify the wreath of
the port back to test the function. | column | Enumeration | .1.3.6.1.4.1.6339.100.3.2.1.13 |
| speedDuplex The speed and duplex status of the port. | column | Enumeration | .1.3.6.1.4.1.6339.100.3.2.1.14 |
| portMode port mode: 1 is access,2 is trunk,3 is hybrid | column | Enumeration | .1.3.6.1.4.1.6339.100.3.2.1.15 |
| pvid port of native vlan No. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6339.100.3.2.1.16 |
| indicatesType Indicates the port type of the configuration of the switch. | column | Enumeration | .1.3.6.1.4.1.6339.100.3.2.1.17 |
| vctAction This object indicates the VCT action of the port,only the value 1 is permitted
when SET this entry though you can GET 1(processing) and 0(succeed);
The specified port will be shu… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6339.100.3.2.1.18 |
| vctLastStatus Indicates the last VCT status of the port. | column | OctetString | .1.3.6.1.4.1.6339.100.3.2.1.19 |
| portName Name of the port. exp:financial. | column | OctetString | .1.3.6.1.4.1.6339.100.3.2.1.2 |
| portTrunkAllowedvlan trunk port allowed vlan list string | column | OctetString | .1.3.6.1.4.1.6339.100.3.2.1.20 |
| portHybridTaggedAllowedvlan hybrid port tagged allowed vlan list string | column | OctetString | .1.3.6.1.4.1.6339.100.3.2.1.21 |
| portHybridUntaggedAllowedvlan hybrid port untagged allowed vlan list string | column | OctetString | .1.3.6.1.4.1.6339.100.3.2.1.22 |
| portBandWidthUsage The percentage of the port's bandwidth usage | column | Integer32 | .1.3.6.1.4.1.6339.100.3.2.1.23 |
| lastFiveMinInPktsPerSec last five minutes input packets/Sec. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6339.100.3.2.1.24 |
| lastFiveMinOutPktsPerSec last five minutes output packets/Sec. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6339.100.3.2.1.25 |
| lastFiveSecInPktsPerSec last five seconds input packets/Sec. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6339.100.3.2.1.26 |
| lastFiveSecOutPktsPerSec last five seconds output packets/Sec. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6339.100.3.2.1.27 |
| portBlockMode port block mode.value:
noblock: 0,
rate-violation block: 1,
loopback-detection block: 2,
unknown-protocol block: 3 | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6339.100.3.2.1.29 |
| switchNum This value is denoting the number of swith in which this port resides.
For the non-stackable device,the value is always 1.
While for the stackable device, the value is real switch… | column | Integer32 | .1.3.6.1.4.1.6339.100.3.2.1.3 |
| portBlockState port shutdown mode.value:
noblock state: 0,
rate-violation block state: 1,
loopback-detection block state: 2,
unknown-protocol block state: 3 | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6339.100.3.2.1.30 |
| portComboMediaType The media type of combo port | column | Enumeration | .1.3.6.1.4.1.6339.100.3.2.1.31 |
| slotNum This value is denoting the number of slot.
For the static slot,the value is 1,while for
the extended slot the value is real extended slot number. | column | Integer32 | .1.3.6.1.4.1.6339.100.3.2.1.4 |
| portType Type of expansion module in this port. | column | Enumeration | .1.3.6.1.4.1.6339.100.3.2.1.5 |
| flowControlStatus The flow-control status of the port.
Its functionality is exactly same as 'flow control' or 'no flow control' commands
in console mode. | column | Enumeration | .1.3.6.1.4.1.6339.100.3.2.1.6 |
| bandwidthControlStatus The bandwidth-control status of the port.
Its functionality is to stop the bandwidth control.
The only way to enable bandwidth control is to set receiveBandwidth or transmitBandw… | column | Enumeration | .1.3.6.1.4.1.6339.100.3.2.1.7 |
| maxBandwidth The max bandwidth of the port. | column | Enumeration | .1.3.6.1.4.1.6339.100.3.2.1.8 |
| receiveBandwidth The recevice bandwidth of the port. Its unit is kbs.
The command 'bandwidth control 50 both' in console mode equals
setting both receiveBandwidth and transmitBandwidth to 50 kbs.
… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6339.100.3.2.1.9 |