rtmStaticRtPathCost
DC-RTM-MIB ·
.1.3.6.1.4.1.629.10.7.1.3.1.17
Object
Path cost for this static route, if overriding the default
setting. This field is not used if rtmStaticRtUsePathCost
is set to AMB_FALSE.
When deciding which path for a given route should be marked as
active, the administrative distance is considered first. If
multiple paths have the same administrative distance, the path
with the lowest path cost is chosen as the active path. If
multiple paths have the same path cost, one or more paths may
be marked as active depending on the value of
rtmEntityEqlCostOpt.
Context
- MIB
- DC-RTM-MIB
- OID
.1.3.6.1.4.1.629.10.7.1.3.1.17- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- rtmStaticRtEntry
- Table
- rtmStaticRtTable
- Siblings
- 21
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rtmStaticRtFteIndex The HAF entity index identifying the instance of DC-RTM to which
this static route entry applies. | column | FteIndex | .1.3.6.1.4.1.629.10.7.1.3.1.1 |
| rtmStaticRtOverride The administrative distance for this route is by default taken to be
the administrative distance configured in the DC-RTM entity table
associated with the route's path type (rtmSt… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.629.10.7.1.3.1.10 |
| rtmStaticRtAdminDist Administrative distance for static route, if overriding the
default administrative distance for this route given in the
DC-RTM entity table. This field is not defined if overridi… | column | DC-MASTER-TCAdminDistance | .1.3.6.1.4.1.629.10.7.1.3.1.11 |
| rtmStaticRtAction The action to perform on receipt of a packet to the specified
destination.
If the action type is 'forward', one or both of the
rtmStaticRtNextHop and rtmStaticRtIfI… | column | DC-MASTER-TCRouteAction | .1.3.6.1.4.1.629.10.7.1.3.1.12 |
| rtmStaticRtFwdAddrType The type of the address used as the forwarding address
for this route.
This object must be set to the same value as
rtmEntityAddressFamily. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.629.10.7.1.3.1.13 |
| rtmStaticRtForwardingAddr Forwarding address to advertise for this route. The
length of this field must match the length of the
forwarding address type. A value of all zeros is treated
the same as no for… | column | OctetString | .1.3.6.1.4.1.629.10.7.1.3.1.14 |
| rtmStaticRtPathType Type of path associated with this route. | column | DC-MASTER-TCPathType | .1.3.6.1.4.1.629.10.7.1.3.1.15 |
| rtmStaticRtUsePathCost The path cost for this route is by default set to be equal
to the administrative distance (rtmStaticRtAdminDist) for
the route. If rtmStaticRtUsePathCost is set to AMB_TRUE,
this… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.629.10.7.1.3.1.16 |
| rtmStaticRtUserData User data for this static route. This user data is passed to the
QCRT_USER_STATIC_RT_EVENT user exit. | column | OctetString | .1.3.6.1.4.1.629.10.7.1.3.1.18 |
| rtmStaticRtLooseNextHop This object indicates whether this static route contains a loose
next hop (see rtmStaticRtNextHop for details). | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.629.10.7.1.3.1.19 |
| rtmStaticRtDestAddrType The type of the address used as the destination
internetwork address or subnet address.
This object must be set to the same value as
rtmEntityAddressFamily. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.629.10.7.1.3.1.2 |
| rtmStaticRtBfdSupport This object indicates whether DC-RTM should use BFD to check IP
reachability to the static route's next hop.
DC-RTM will only attempt to use BFD if rtmEntityBfdInde… | column | RtmBfdSupport | .1.3.6.1.4.1.629.10.7.1.3.1.20 |
| rtmStaticRtBfdStatus The current BFD session state for this static route. | column | DC-MASTER-TCBfdSessionStatus | .1.3.6.1.4.1.629.10.7.1.3.1.21 |
| rtmStaticRtInterfaceName The textual name of the interface. The value of this
object should be the name of the interface as assigned by
the local device and should be suitable for use in
commands entered… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.629.10.7.1.3.1.22 |
| rtmStaticRtDestAddr Destination internetwork address or subnet address. The
destination prefix length is applied to this value, and to a
particular destination address, to determine whether the rout… | column | OctetString | .1.3.6.1.4.1.629.10.7.1.3.1.3 |
| rtmStaticRtDestLen Prefix length (in bits) to apply to the destination internetwork
address or subnet address, to obtain the set of addresses to which
this route applies.
If the prefi… | column | Integer32 | .1.3.6.1.4.1.629.10.7.1.3.1.4 |
| rtmStaticRtNextHopType The type of the address used as the next-hop address
for this route.
This object must be set to the same value as
rtmEntityAddressFamily, even if the rtmStaticRtNex… | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.629.10.7.1.3.1.5 |
| rtmStaticRtNextHop The next-hop IP address, if any.
If rtmStaticRtAction is 'forward', there may or may not be
a next-hop IP address.
A next-hop IP address is not requi… | column | OctetString | .1.3.6.1.4.1.629.10.7.1.3.1.6 |
| rtmStaticRtIfIndex This field contains the network interface index, if any,
of the output network interface used to reach the next hop.
If rtmStaticRtAction is 'forward', rtmStaticIfI… | column | Integer32 | .1.3.6.1.4.1.629.10.7.1.3.1.7 |
| rtmStaticRtRowStatus Used to create and delete a DC-RTM static route. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.629.10.7.1.3.1.8 |
| rtmStaticRtAdminStat The administrative state of the static route. The row status by
itself does not indicate whether the static route definition
is currently active. The row must be defined and the… | column | DC-MASTER-TCAdminStatus | .1.3.6.1.4.1.629.10.7.1.3.1.9 |