rtmRouteType

DC-RTM-MIB · .1.3.6.1.4.1.629.10.7.1.6.1.10
MIB view Table view

Object

column RouteType 
The type of route.
              
local(3) refers to a route for which the destination is a
local IP address or for which the next hop is the final
destination.  This includes routes to local IP addresses
and routes to directly connected IP addresses or subnets.
              
remote(4) refers to a route for which the next hop is not
the final destination.
              
reject (2) refers to a route which, if matched, discards
the message as unreachable.  This is used in some
protocols as a means of correctly aggregating routes.

Context

MIB
DC-RTM-MIB
OID
.1.3.6.1.4.1.629.10.7.1.6.1.10
Type
column
Access
readonly
Status
current
Parent
rtmRouteEntry
Table
rtmRouteTable
Siblings
23

Syntax

RouteType
Source
RouteType
Base type
Enumeration

Values & Constraints

Type Values
1other
2reject
3local
4remote

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
rtmRouteFteIndex
The HAF entity index identifying the instance of DC-RTM to which this static route entry applies.
columnFteIndex.1.3.6.1.4.1.629.10.7.1.6.1.1
rtmRouteProto
The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols.
columnIANA-RTPROTO-MIBIANAipRouteProtocol.1.3.6.1.4.1.629.10.7.1.6.1.11
rtmRouteAge
The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of 'too old' can be implied except through knowledge of the …
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.629.10.7.1.6.1.12
rtmRouteInfo
A reference to MIB definitions specific to the particular routing protocol which is responsible for this route, as determined by the value specified in the route's rtmRouteProto v…
columnRouteInfo.1.3.6.1.4.1.629.10.7.1.6.1.13
rtmRouteNextHopAS
The Autonomous System Number of the Next Hop. The semantics of this object are determined by the routing-protocol specified in the route's rtmRouteProto value. When this object is…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.629.10.7.1.6.1.14
rtmRouteMetric1
The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's rtmRouteProto value. If this metric is not…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.629.10.7.1.6.1.15
rtmRouteMetric2
An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's rtmRouteProto value. If this metric is no…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.629.10.7.1.6.1.16
rtmRouteMetric3
An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's rtmRouteProto value. If this metric is no…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.629.10.7.1.6.1.17
rtmRouteMetric4
An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's rtmRouteProto value. If this metric is no…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.629.10.7.1.6.1.18
rtmRouteMetric5
An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's rtmRouteProto value. If this metric is no…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.629.10.7.1.6.1.19
rtmRouteStatus
The row status variable, used according to row installation and removal conventions.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.629.10.7.1.6.1.2
rtmRouteConnected
Indicates whether the route destination is directly connected. A directly connected route can be reached without going through any IP routers. Route …
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.629.10.7.1.6.1.20
rtmRouteXCIndex
Index into mplsXCTable that identifies which cross- connect entry is associated with this route entry by containing the mplsXCIndex of that cross-connect entry. This field is onl…
columnMPLS-LSR-STD-MIBMplsIndexType.1.3.6.1.4.1.629.10.7.1.6.1.21
rtmRouteLocalDestIfIndex
If the route destination is a local IP address then this is the interface index that the local IP address is assigned to. Otherwise this field is zero.
columnInteger32.1.3.6.1.4.1.629.10.7.1.6.1.22
rtmRouteAdminDistance
Administrative distance for this route. The lower the administrative distance for a given route, the more likely that route is to be used by DC-RTM as the active route for the rou…
columnDC-MASTER-TCAdminDistance.1.3.6.1.4.1.629.10.7.1.6.1.23
rtmRoutePathType
Protocol specific path type. This field only has meaning if rtmRouteType is set to 'remote'. Otherwise it is set to 'none'.
columnDC-MASTER-TCPathType.1.3.6.1.4.1.629.10.7.1.6.1.24
rtmRouteDestType
The type of the address used as the destination IP address for this route.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.629.10.7.1.6.1.3
rtmRouteDest
Destination internetwork address or subnet address. The destination prefix length is applied to this value, and to a particular destination address, to determine whether the rout…
columnOctetString.1.3.6.1.4.1.629.10.7.1.6.1.4
rtmRouteDestLen
Prefix length (in bits) to apply to the rtmRouteDest object, to obtain the set of addresses to which this route applies. If the prefix length is L, then applying th…
columnInteger32.1.3.6.1.4.1.629.10.7.1.6.1.5
rtmRouteTos
The policy specifier is the IP TOS Field. The encoding of IP TOS is as specified by the following convention. Zero indicates the default path if no more specific policy applies. …
columnInteger32.1.3.6.1.4.1.629.10.7.1.6.1.6
rtmRouteNextHopType
The type of the address used as the next-hop address for this route.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.629.10.7.1.6.1.7
rtmRouteNextHop
On remote routes, the address of the next system en route; Otherwise, zero.
columnOctetString.1.3.6.1.4.1.629.10.7.1.6.1.8
rtmRouteIfIndex
The ifIndex value which identifies the local interface through which the next hop of this route should be reached.
columnInteger32.1.3.6.1.4.1.629.10.7.1.6.1.9