rtmRedistInfoSrc
DC-RTM-MIB ·
.1.3.6.1.4.1.629.10.7.1.2.1.6
Object
column
r/w
InfoSourceDest
The source of the routing information. This is one of:
- an RPM, joined to DC-RTM on the Routing Protocol Input
interface
- 'static' for statically defined routes, defined in the
static routes table with path type ATG_QC_PATH_STATIC
- 'connected' for routes to local IP addresses and directly
connected IP addresses and subnets, learned via the I3
interface, or defined in the static route table with path
type ATG_QC_PATH_CONNECTED
- 'all', meaning that this entry applies to routes from all
RPMs and static routes, but not routes learnt via the I3
interface
- 'all-incl-connected', meaning that this entry applies to
routes from all RPMs, static routes, and routes learnt via
the I3 interface.
Context
- MIB
- DC-RTM-MIB
- OID
.1.3.6.1.4.1.629.10.7.1.2.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- rtmRedistEntry
- Table
- rtmRedistTable
- Siblings
- 47
Syntax
InfoSourceDest
- Source
- InfoSourceDest
- Base type
Enumeration
Values & Constraints
Type Values
0 | infoSourceAll |
1 | infoSourceAllInclConnected |
65536 | infoSourceOther |
131072 | infoSourceConnected |
196608 | infoSourceStatic |
262144 | infoSourceIcmp |
327680 | infoSourceEgp |
393216 | infoSourceGgp |
458752 | infoSourceHello |
524288 | infoSourceRip |
589824 | infoSourceIsis |
655360 | infoSourceEsis |
720896 | infoSourceIgrp |
786432 | infoSourceBbnSpfIgp |
851968 | infoSourceOspf |
917504 | infoSourceBgp |
983040 | infoSourceIdpr |
1048576 | infoSourceEigrp |
1114112 | infoSourceDvmrp |
1179648 | infoSourceEnni |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rtmRedistFteIndex The HAF entity index identifying the instance of DC-RTM to which
this redistribution table entry applies. | column | FteIndex | .1.3.6.1.4.1.629.10.7.1.2.1.1 |
| rtmRedistDestInstFlt Specifies whether or not a destination instance filter is in use.
If it is not in use then this entry applies to all instances of the
destination RPM.
The purpose o… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.629.10.7.1.2.1.10 |
| rtmRedistDestInst Value of the destination instance filter, if in use. If the filter
is in use then do not redistribute this routing information to a
given instance of an RPM if this filter value … | column | FteIndex | .1.3.6.1.4.1.629.10.7.1.2.1.11 |
| rtmRedistAddrFilterType The type of the address used as the destination address filter.
This object must be set to the same value as
rtmEntityAddressFamily, and this is its default value. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.629.10.7.1.2.1.12 |
| rtmRedistAddrFilter Destination IP address filter. Do not match the source routing
information to this entry if one of these fails:
- the destination IP address in the source routing… | column | OctetString | .1.3.6.1.4.1.629.10.7.1.2.1.13 |
| rtmRedistAddrFltLen Destination IP address filter prefix length (in bits). Do not
match the source routing information to this entry if one of these
fails:
- the destination IP addre… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.629.10.7.1.2.1.14 |
| rtmRedistHopFltValType The type of the address used as the next hop address filter.
This object must be set to the same value as
rtmEntityAddressFamily, and this is its default value. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.629.10.7.1.2.1.15 |
| rtmRedistHopFltVal Value of next hop filter. Do not match the source routing
information to this entry if none of the next hop values in the
source routing information, with the next hop filter pre… | column | OctetString | .1.3.6.1.4.1.629.10.7.1.2.1.16 |
| rtmRedistHopFltLen Next hop filter prefix length. Do not match the source routing
information to this entry if none of the next hop values in the
source routing information, with the next hop filte… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.629.10.7.1.2.1.17 |
| rtmRedistIfIndexFlt Specifies whether or not an output network interface index filter
is in use. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.629.10.7.1.2.1.18 |
| rtmRedistIfIndex Value of output network interface index filter, if in use.
If the filter is in use then do not match the source routing
information to this entry if none of the output network int… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.629.10.7.1.2.1.19 |
| rtmRedistEntryId The index of this DC-RTM redistribution table entry within the
DC-RTM entity. This is an arbitrarily selected identifier. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.629.10.7.1.2.1.2 |
| rtmRedistPathTypeFlt Specifies whether or not a path type filter is in use. If it is
not in use then this entry applies to all path type values.
A path type filter can only be used if … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.629.10.7.1.2.1.20 |
| rtmRedistPathType Value of path type filter, if in use. If the filter is in use
then do not match the source routing information to this entry
if the path type in the source routing information do… | column | DC-MASTER-TCPathType | .1.3.6.1.4.1.629.10.7.1.2.1.21 |
| rtmRedistOspfAreaFlt Specifies whether or not an OSPF area filter is in use.
The filter can only be on if the routing information source
field is OSPF. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.629.10.7.1.2.1.22 |
| rtmRedistOspfArea Value of OSPF area filter, if in use. If the filter is in use
then do not match the source routing information to this entry
if the OSPF area ID in the information does not match… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.629.10.7.1.2.1.23 |
| rtmRedistOspfTagFlt Specifies whether or not an OSPF tag filter is in use.
The filter can only be on if the routing information source
field is OSPF. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.629.10.7.1.2.1.24 |
| rtmRedistOspfTag Value of OSPF tag filter, if in use. If the filter is in use
then do not match the source routing information to this entry
if the tag in the information does not match this tag. | column | OspfTag | .1.3.6.1.4.1.629.10.7.1.2.1.25 |
| rtmRedistCommunityFlt Specifies whether or not a BGP community number filter is in use.
The filter can only be on if the routing information source
field is BGP. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.629.10.7.1.2.1.26 |
| rtmRedistCommunity Value of BGP community number filter, if in use. If the filter
is in use then do not match the source routing information to this
entry if there is no match between one of the co… | column | BgpCommunity | .1.3.6.1.4.1.629.10.7.1.2.1.27 |
| rtmRedistExtCommFlt Specifies whether or not a BGP extended community number filter
is in use. The filter can only be on if the routing information
source field is BGP. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.629.10.7.1.2.1.28 |
| rtmRedistExtComm Value of BGP extended community number filter, if in use. If
the filter is in use then do not match the source routing
information to this entry if there is no match between one … | column | BgpExtendedCommunity | .1.3.6.1.4.1.629.10.7.1.2.1.29 |
| rtmRedistRowStatus Used to create and delete a DC-RTM redistribution table entry. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.629.10.7.1.2.1.3 |
| rtmRedistRedistFlag Flag determining whether or not DC-RTM redistributes routing
information from the given source to the given destination. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.629.10.7.1.2.1.30 |
| rtmRedistMetricConv How to act on the value of the metric in the routing information
received from the source to create a value for the metric in the
routing information sent to the destination.
… | column | MetricConversion | .1.3.6.1.4.1.629.10.7.1.2.1.31 |
| rtmRedistMetricValue Numerical parameter to use when creating a value for the metric
in the routing information sent to the destination based on the
supplied metric in the routing information received… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.629.10.7.1.2.1.32 |
| rtmRedistNwPathType Type of path to set in routing information sent to
destination.
This field is only used if the redistribution flag is TRUE.
If the information destin… | column | DC-MASTER-TCPathType | .1.3.6.1.4.1.629.10.7.1.2.1.33 |
| rtmRedistNwOspfTag Value of OSPF tag to set in routing information sent to
destination.
This field is only used if the redistribution flag is TRUE and
the destination for the routing … | column | OspfTag | .1.3.6.1.4.1.629.10.7.1.2.1.34 |
| rtmRedistOspfPropagate Value of OSPF propagate flag to set in routing information
sent to destination.
This field is only used if the redistribution flag is TRUE and
the destination for t… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.629.10.7.1.2.1.35 |
| rtmRedistAddCommunity obsolete Flag determining whether or not DC-RTM adds a BGP community value
in routing information sent to the destination.
This field is only used if the redistribution flag… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.629.10.7.1.2.1.36 |
| rtmRedistNwCommunity obsolete Value to use for BGP community number in routing information
sent to the destination if the add community flag is TRUE.
This field is only used if the redistributio… | column | BgpCommunity | .1.3.6.1.4.1.629.10.7.1.2.1.37 |
| rtmRedistAddExtComm obsolete Flag determining whether or not DC-RTM adds a BGP extended
community value in routing information sent to the destination.
This field is only used if the redistribu… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.629.10.7.1.2.1.38 |
| rtmRedistNwExtComm obsolete Value to use for BGP extended community number in routing
information sent to destination if the add extended community
flag is TRUE.
This field is only used if the… | column | BgpExtendedCommunity | .1.3.6.1.4.1.629.10.7.1.2.1.39 |
| rtmRedistAdminStat The administrative state of the redistribution table entry.
The row status by itself does not indicate whether the redistribution
is currently active. The row must be defined and… | column | DC-MASTER-TCAdminStatus | .1.3.6.1.4.1.629.10.7.1.2.1.4 |
| rtmRedistNwOrigin Value to use for the BGP origin code in the routing information
sent to the destination.
This field is only used if the redistribution flag is TRUE and
the destinat… | column | BgpOriginCode | .1.3.6.1.4.1.629.10.7.1.2.1.40 |
| rtmRedistAddMed Flag determining whether or not DC-RTM adds a BGP Multi-Exit
Discriminator value in routing information sent to the destination.
This field is only used if the redi… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.629.10.7.1.2.1.41 |
| rtmRedistNwMed Value to use for the BGP Multi-Exit Discriminator in the routing
information sent to the destination of the add MED flag is TRUE.
This field is only used if the red… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.629.10.7.1.2.1.42 |
| rtmRedistAddLocalPref Flag determining whether or not DC-RTM adds a BGP Local Preference
value in routing information sent to the destination.
This field is only used if the redistributi… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.629.10.7.1.2.1.43 |
| rtmRedistNwLocalPref Value to use for the BGP Local Preference in the routing
information sent to the destination if the add local pref flag is
TRUE.
This field is only used if the redi… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.629.10.7.1.2.1.44 |
| rtmRedistSetListId List identifier for the list of set actions to apply. The list
of set actions are defined in the rtmRdstSetFieldTable, and are
the group of entries in that table with the
rtmRdst… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.629.10.7.1.2.1.45 |
| rtmRedistAddAsLimUpper Flag determining whether or not DC-RTM adds a BGP AS_PATHLIMIT
attribute upper bound value to routing information sent to the
destination. The destination will automatically add … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.629.10.7.1.2.1.46 |
| rtmRedistNwAsLimUpper Value to use for the BGP AS_PATHLIMIT upper bound in the routing
information sent to the destination if the rtmRedistAddAsLimUpper
flag is TRUE.
This field is only … | column | Unsigned32 | .1.3.6.1.4.1.629.10.7.1.2.1.47 |
| rtmRedistOspfVpnPeCeSupport Flag determining whether or not DC-RTM translates between
OSPF routes and BGP routes in order to facilitate use of
OSPF between provider edge (PE) routers and customer edge
(CE) r… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.629.10.7.1.2.1.48 |
| rtmRedistPriority The priority assigned to this table entry. The lower this value
takes, the higher the priority of the entry.
The priority takes effect when there is more than one … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.629.10.7.1.2.1.5 |
| rtmRedistSrcInstFlt Specifies whether or not a source instance filter is in use. If
it is not in use then this entry applies to all instances of the
source RPM.
The purpose of this fi… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.629.10.7.1.2.1.7 |
| rtmRedistSrcInst Value of the source instance filter, if in use. If the filter
is in use then do not match the source routing information to
this entry if this filter value does not match the fau… | column | FteIndex | .1.3.6.1.4.1.629.10.7.1.2.1.8 |
| rtmRedistInfoDest The destination of the routing information. This is usually an
RPM, joined to DC-RTM on the Routing Protocol Input
interface. It can also be set to 'all' or 'all-incl-connected'… | column | InfoSourceDest | .1.3.6.1.4.1.629.10.7.1.2.1.9 |