pimStaticRPMultiPriority
DC-PIM-MIB ·
.1.2.826.42.1.1578918.5.71.1.1.1.22.1.5
Object
column
r/w
Unsigned32
The priority for this row. Numerically higher values for
this object indicate lower priorities, with the value zero
denoting the highest priority.
For a group range, for the set of configured RPs for which
PIM has a valid route, it selects the RP with the best
priority.
If multiple RPs have the same best priority value, the
behavior is as follows.
- If this is a BIDIR group range and
pimTmEntBidirDataMonitorEnable is 'false', it selects
the highest RP address.
- In all other cases it performs RP load-splitting via
the algorithm specified by
pimTmEntRPMultipathAlgorithm.
As described in pimGroupMappingTable, BSR-learnt RPs are
always selected over statically-configured RPs, and BIDIR
mappings are always selected over ASM mappings, regardless
of priority values.
Context
- MIB
- DC-PIM-MIB
- OID
.1.2.826.42.1.1578918.5.71.1.1.1.22.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- pimStaticRPMultiEntry
- Table
- pimStaticRPMultiTable
- Siblings
- 10
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 0-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pimStaticRPMultiAddressType The address type of this entry.
DC-PIM supports only the values 'ipv4' and 'ipv6' for
this object. | column | INET-ADDRESS-MIBInetAddressType | .1.2.826.42.1.1578918.5.71.1.1.1.22.1.1 |
| pimStaticRPMultiOperStatus The current operational state of this row. | column | DC-MASTER-TCNpgOperStatus | .1.2.826.42.1.1578918.5.71.1.1.1.22.1.10 |
| pimStaticRPMultiOperFailReason When pimStaticRPMultiOperStatus is operStatusFailedPerm,
this object provides additional information about the
cause of the failure. | column | PimStaticRPMultiOpFailReason | .1.2.826.42.1.1578918.5.71.1.1.1.22.1.11 |
| pimStaticRPMultiRPAddress The IP address of the RP to be used for groups within this
group prefix. The InetAddressType is given by the
pimStaticRPMultiAddressType object.
This field must be… | column | OctetString | .1.2.826.42.1.1578918.5.71.1.1.1.22.1.2 |
| pimStaticRPMultiGrpAddress The multicast group address which, when combined with
pimStaticRPMultiGrpPrefixLength, gives the group prefix
for this entry. The InetAddressType is given by the
pimStaticRPMulti… | column | OctetString | .1.2.826.42.1.1578918.5.71.1.1.1.22.1.3 |
| pimStaticRPMultiGrpPrefixLength The multicast group prefix length, which, when combined
with pimStaticRPMultiGrpAddress, gives the group prefix
for this entry. The InetAddressType is given by the
pimStaticRPMul… | column | Unsigned32 | .1.2.826.42.1.1578918.5.71.1.1.1.22.1.4 |
| pimStaticRPMultiPimMode The PIM mode to be used for groups in this group prefix.
This object must be set to either 'asm' or 'bidir'. To
configure group ranges for other modes, use
pimStat… | column | PimGroupMode | .1.2.826.42.1.1578918.5.71.1.1.1.22.1.6 |
| pimStaticRPMultiOverrideSubrngs Whether this static RP configuration will override other
RP information learned for groups in this group prefix.
If this object is TRUE, then this object will overr… | column | SNMPv2-TCTruthValue | .1.2.826.42.1.1578918.5.71.1.1.1.22.1.7 |
| pimStaticRPMultiRowStatus The status of this row, by which rows in this table can
be created and destroyed.
This status object cannot be set to active(1) before a valid
value has been writte… | column | SNMPv2-TCRowStatus | .1.2.826.42.1.1578918.5.71.1.1.1.22.1.8 |
| pimStaticRPMultiAdminStatus The desired administrative state of this row. | column | DC-MASTER-TCAdminStatus | .1.2.826.42.1.1578918.5.71.1.1.1.22.1.9 |