ospfPmShamLinkIpAddrConflict
DC-OSPF-MIB ·
.1.3.6.1.4.1.629.10.3.1.25.1.32
Object
column
OspfShamConflictFlags
Indicates whether the local sham link endpoint address
conflicts with any addresses advertized into OSPF by
this OSPF instance.
To ensure proper operation of the sham link the local
sham link endpoint address must be distributed as a host
route through BGP but NOT through OSPF. Any conflicts
reported in this field indicate that this requirement is
being broken.
Reference: RFC 4577 section 4.2.7.1.
Context
- MIB
- DC-OSPF-MIB
- OID
.1.3.6.1.4.1.629.10.3.1.25.1.32- Type
- column
- Access
- readonly
- Status
- current
- Parent
- ospfPmShamLinkEntry
- Table
- ospfPmShamLinkTable
- Siblings
- 34
Syntax
OspfShamConflictFlags
- Source
- OspfShamConflictFlags
- Base type
Bits
Values & Constraints
Type Values
0 | shamConflictIf |
1 | shamConflictHost |
2 | shamConflictRtm |
3 | shamConflictStable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ospfPmShamLinkApplIndex Identifies this OSPF entity. | column | OspfPmIndex | .1.2.826.0.1.1578918.5.62.1.1.25.1.1 |
| ospfPmShamLinkHelloInterval The length of time, in seconds, between the Hello packets
that the router sends on this sham link. This value must
be the same for the remote endpoint.
Note that t… | column | HelloRange | .1.2.826.0.1.1578918.5.62.1.1.25.1.10 |
| ospfPmShamLinkRtrDeadInterval The number of seconds that a router's Hello packets have
not been seen before its neighbors declare the router
down. This should be some multiple of the Hello interval.
This valu… | column | Integer32 | .1.2.826.0.1.1578918.5.62.1.1.25.1.11 |
| ospfPmShamLinkState OSPF interface state for this sham link. | column | OspfInterfaceStates | .1.2.826.0.1.1578918.5.62.1.1.25.1.12 |
| ospfPmShamLinkEvents The number of state changes or error events on this
sham link. | column | SNMPv2-SMICounter32 | .1.2.826.0.1.1578918.5.62.1.1.25.1.13 |
| ospfPmShamLinkAuthType The authentication type for this sham link.
Additional authentication types may be assigned locally.
Note that this object can be used to engage in significant
atta… | column | OspfAuthTypes | .1.2.826.0.1.1578918.5.62.1.1.25.1.14 |
| ospfPmShamLinkAuthKey The cleartext password used as an OSPF Authentication key
when simplePassword security is enabled. This object does
not access any OSPF Cryptogaphic (e.g. MD5)
Authentication Ke… | column | OctetString | .1.2.826.0.1.1578918.5.62.1.1.25.1.15 |
| ospfPmShamLinkLsaCount The total number of link-local link state advertisements
in this sham link's link-local link state database. | column | SNMPv2-SMIGauge32 | .1.2.826.0.1.1578918.5.62.1.1.25.1.16 |
| ospfPmShamLinkLsaCksumSum The 32 bit unsigned sum of the link-state advertisements'
LS checksums contained in this sham link's link-local link
state database. The sum can be used to determine if there
has… | column | SNMPv2-SMIUnsigned32 | .1.2.826.0.1.1578918.5.62.1.1.25.1.17 |
| ospfPmShamLinkAdminStatus The desired administrative state of this sham link. | column | OspfPmAdminStatus | .1.2.826.0.1.1578918.5.62.1.1.25.1.18 |
| ospfPmShamLinkOperStatus The current operational state of this sham link. | column | OspfPmOperStatus | .1.2.826.0.1.1578918.5.62.1.1.25.1.19 |
| ospfPmShamLinkAreaId The OSPF area in which the sham link belongs. | column | AreaID | .1.2.826.0.1.1578918.5.62.1.1.25.1.2 |
| ospfPmShamLinkTransmitDelay The time this interface will delay a LSU packet, in order
to add more LSAs to the packet before sending. Setting
this correctly can reduce the network traffic. This is
configura… | column | milliseconds Integer32 | .1.2.826.0.1.1578918.5.62.1.1.25.1.20 |
| ospfPmShamLinkIPMaxPacketSize Maximum transfer unit (MTU) for this sham link.
This is the maximum packet size in bytes for packets sent
over the sham link. This size excludes link layer headers… | column | Integer32 | .1.2.826.0.1.1578918.5.62.1.1.25.1.21 |
| ospfPmShamLinkInterfaceName The textual name of the interface.
Set to null if not known.
This field cannot be changed if the row is admin status up
and row status active. | column | SNMPv2-TCDisplayString | .1.2.826.0.1.1578918.5.62.1.1.25.1.22 |
| ospfPmShamLinkLsaRefreshIntvl Self-originated LSAs are periodically reflooded into the
routing domain, to add to the robustness of the OSPF
protocol. This value determines the interval between
refreshes of LS… | column | seconds Integer32 | .1.2.826.0.1.1578918.5.62.1.1.25.1.23 |
| ospfPmShamLinkHelperModePolicy Indicates whether DC-OSPF will help a neighbor undergoing
hitless restart on this interface for the specified
reason. This field contains a bit flag for each of
OspfHitlessRestar… | column | OspfHelperModePolicy | .1.2.826.0.1.1578918.5.62.1.1.25.1.24 |
| ospfPmShamLinkMaxGracePeriod If configured to help neighbors undergoing hitless restart
on this interface, this field indicates the maximum grace
period that will be allowed for a neighboring router
undergoin… | column | UpToRefreshInterval | .1.2.826.0.1.1578918.5.62.1.1.25.1.25 |
| ospfPmShamLinkEnableTeFlooding Used to enable TE LSA flooding across this interface.
This allows the TE data network to be partitioned
separately from the underlying OSPF control plane network.
This flag has no… | column | SNMPv2-TCTruthValue | .1.2.826.0.1.1578918.5.62.1.1.25.1.26 |
| ospfPmShamLinkAuthUserData Authentication user data for interface level
authentication.
This data is passed opaquely to the Metaswitch
authentication interface where it can be used to assist
… | column | DC-MASTER-TCAuthUserDataString512 | .1.2.826.0.1.1578918.5.62.1.1.25.1.27 |
| ospfPmShamLinkFastHelloMult The number of Hellos that should be sent within 1 second
when using Fast Hellos on this interface. This value does
not have to be same for all routers attached to a common
networ… | column | FastHelloMultiplierRange | .1.2.826.0.1.1578918.5.62.1.1.25.1.28 |
| ospfPmShamLinkMtuIgnore This object controls whether DC-OSPF checks the MTU size
on incoming Database Description packets. By default, if
the received MTU size in a DB Description packet is higher
than … | column | SNMPv2-TCTruthValue | .1.2.826.0.1.1578918.5.62.1.1.25.1.29 |
| ospfPmShamLinkLocalIpAddr The local sham link endpoint address. | column | SNMPv2-SMIIpAddress | .1.2.826.0.1.1578918.5.62.1.1.25.1.3 |
| ospfPmShamLinkNmEntity The index of the OSPF NM entity that handles this sham
link.
This field cannot be changed if the row is admin status up
and row status active. | column | SNMPv2-SMIInteger32 | .1.2.826.0.1.1578918.5.62.1.1.25.1.30 |
| ospfPmShamLinkRstStrictLsaChk Whether to perform strict LSA checking when acting as a
restart helper for a restarting peer on this sham link.
When ospfPmShamLinkRstStrictLsaChk is 'true', OSPF
w… | column | SNMPv2-TCTruthValue | .1.2.826.0.1.1578918.5.62.1.1.25.1.31 |
| ospfPmShamLinkStatsReset Set this object to 'true' to reset all stats counters in the
ospfPmShamLinkStatsTable that augments this table.
Reading the value of this object has no meaning. | column | SNMPv2-TCTruthValue | .1.2.826.0.1.1578918.5.62.1.1.25.1.33 |
| ospfPmShamLinkGrcLsaRsndTmr The value of the timer used to resend Grace LSA packets in
seconds. Following an unplanned restart Grace LSAs are
resent every unplnd_grace_lsa_resend_timer seconds.
… | column | seconds SNMPv2-SMIInteger32 | .1.2.826.0.1.1578918.5.62.1.1.25.1.34 |
| ospfPmShamLinkGRDelayTimer The value of the timer used to wait, after an unplanned
graceful restart, before sending the first HELLO.
If grace LSAs are being retransmitted, the retransmissions
are stopped wh… | column | seconds SNMPv2-SMIInteger32 | .1.2.826.0.1.1578918.5.62.1.1.25.1.35 |
| ospfPmShamLinkRemoteIpAddr The remote sham link endpoint address. | column | SNMPv2-SMIIpAddress | .1.2.826.0.1.1578918.5.62.1.1.25.1.4 |
| ospfPmShamLinkRowStatus The row status for this OSPF Sham Link Table entry, used
to create and destroy table entries. | column | SNMPv2-TCRowStatus | .1.2.826.0.1.1578918.5.62.1.1.25.1.5 |
| ospfPmShamLinkIfIndex The interface index assigned to this sham link.
This is advertised in the router's router-LSAs.
This field cannot be changed if the row is admin status up
and row status active. | column | IF-MIBInterfaceIndex | .1.2.826.0.1.1578918.5.62.1.1.25.1.6 |
| ospfPmShamLinkMetric The configured metric for this sham link.
If this metric is zero then the sham link uses the default
metric specified by ospfPmEntVpnDfltShamLinkMetric. | column | Integer32 | .1.2.826.0.1.1578918.5.62.1.1.25.1.7 |
| ospfPmShamLinkTransitDelay The estimated number of seconds it takes to transmit a
link-state update packet over this sham link. | column | UpToMaxAge | .1.2.826.0.1.1578918.5.62.1.1.25.1.8 |
| ospfPmShamLinkRetransInterval The number of seconds between link-state advertisement
retransmissions for this sham link.
This value is also used when retransmitting database
description and link-state request … | column | UpToMaxAge | .1.2.826.0.1.1578918.5.62.1.1.25.1.9 |