ospfPmNbrConfiguredPriority
DC-OSPF-MIB ·
.1.3.6.1.4.1.629.10.3.1.10.1.22
Object
column
r/w
DesignatedRouterPriority
The configured priority of this neighbor. This field is set to a non-zero value in order to initiate an 'hello' exchange with a neighbor over an NBMA interface. For the actual value which has been signalled by the neighbor, see ospfPmNbrPriority.
Context
- MIB
- DC-OSPF-MIB
- OID
.1.3.6.1.4.1.629.10.3.1.10.1.22- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- ospfPmNbrEntry
- Table
- ospfPmNbrTable
- Siblings
- 22
Syntax
DesignatedRouterPriority
- Source
- DesignatedRouterPriority
- Base type
Integer32
Values & Constraints
Type Constraints
range: 0..255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ospfPmNbrIpAddr The IP address this neighbor is using in its
IP Source Address. Note that, on addressless
links, this will not be 0.0.0.0, but the address
of another of the neighbor's interfaces. | column | SNMPv2-SMIIpAddress | .1.2.826.0.1.1578918.5.62.1.1.10.1.1 |
| ospfPmNbrPermanence This variable displays the status of the entry.
'dynamic' and 'permanent' refer to how the neighbor
became known. | column | OspfNbrPermanence | .1.2.826.0.1.1578918.5.62.1.1.10.1.10 |
| ospfPmNbrHelloSuppressed Indicates whether Hellos are being suppressed
to the neighbor. | column | SNMPv2-TCTruthValue | .1.2.826.0.1.1578918.5.62.1.1.10.1.11 |
| ospfPmNbrApplIndex Identifies this OSPF entity. | column | OspfPmIndex | .1.2.826.0.1.1578918.5.62.1.1.10.1.12 |
| ospfPmNbrAdminStatus The desired administrative state of this neighbor. This object
can only be changed for explicitly defined neighbors. For
discovered neighbors (ospfPmNbrPermanence is 'dynamic'), … | column | OspfPmAdminStatus | .1.2.826.0.1.1578918.5.62.1.1.10.1.13 |
| ospfPmNbrOperStatus The current operational state of this neighbor. | column | OspfPmOperStatus | .1.2.826.0.1.1578918.5.62.1.1.10.1.14 |
| ospfPmNbrNumRequests The number of LSAs we have requested from this neighbor
for which we are still awaiting a response. This field is
incremented when an LSA is requested by sending a LS request
pac… | column | Unsigned32 | .1.2.826.0.1.1578918.5.62.1.1.10.1.15 |
| ospfPmNbrIfIpAddr The IP address of the interface used for this neighbor.
Note this field is only used for NBMA and P2MP links. If this value
is set to zero DC-OSPF will choose a suitable interfac… | column | SNMPv2-SMIIpAddress | .1.2.826.0.1.1578918.5.62.1.1.10.1.16 |
| ospfPmNbrDeadTime The time remaining in seconds within which we need to receive a
hello packet from the neighbor or we declare the adjacency down.
If Fast Hellos are in use, this value is always se… | column | PositiveInteger | .1.2.826.0.1.1578918.5.62.1.1.10.1.17 |
| ospfPmNbrAreaId The area to which the neighbor belongs. If the oper_status is
down, then this value is set to zero and the field is not valid. | column | AreaID | .1.2.826.0.1.1578918.5.62.1.1.10.1.18 |
| ospfPmNbrRestartHelperStatus Indicates whether the router is acting as a hitless
restart helper for the neighbor. | column | OspfRestartHelperStatus | .1.2.826.0.1.1578918.5.62.1.1.10.1.19 |
| ospfPmNbrAddressLessIndex On an interface having an IP Address, zero.
On addressless interfaces, the corresponding
value of ifIndex in the Internet Standard MIB.
On row creation, this can be derived from t… | column | IF-MIBInterfaceIndexOrZero | .1.2.826.0.1.1578918.5.62.1.1.10.1.2 |
| ospfPmNbrRestartHelperAge Remaining time in current OSPF hitless restart interval,
if the router is acting as a restart helper for the
neighbor. Set to zero if OSPF is not currently acting as
a restart he… | column | seconds ReturnedRefreshInterval | .1.2.826.0.1.1578918.5.62.1.1.10.1.20 |
| ospfPmNbrRestartHelperExitReason Describes the outcome of the last attempt at acting as a
hitless restart helper for the neighbor. | column | OspfRestartExitReason | .1.2.826.0.1.1578918.5.62.1.1.10.1.21 |
| ospfPmNbrDesignatedRtrState The designated router state of this neighbor. This field
indicates whether the router is the designated router or
backup designated router or neither. | column | OspfDesignatedRtrState | .1.2.826.0.1.1578918.5.62.1.1.10.1.23 |
| ospfPmNbrRtrId A 32-bit integer (represented as a type
IpAddress) uniquely identifying the neighboring
router in the Autonomous System. | column | RouterID | .1.2.826.0.1.1578918.5.62.1.1.10.1.3 |
| ospfPmNbrOptions A Bit Mask corresponding to the neighbor's options
field.
Bit 0, if set, indicates that the system will
operate on Type of Service metrics other than
TOS 0. If zer… | column | SNMPv2-SMIInteger32 | .1.2.826.0.1.1578918.5.62.1.1.10.1.4 |
| ospfPmNbrPriority The priority of this neighbor as signalled in the last
received OSPF Hello packet. A value of 0 signifies that
the neighbor is not eligible to become the designated
router on thi… | column | DesignatedRouterPriority | .1.2.826.0.1.1578918.5.62.1.1.10.1.5 |
| ospfPmNbrState The State of the relationship with this Neighbor. | column | OspfNeighborStates | .1.2.826.0.1.1578918.5.62.1.1.10.1.6 |
| ospfPmNbrEvents The number of times this neighbor relationship
has changed state, or an error has occurred. | column | SNMPv2-SMICounter32 | .1.2.826.0.1.1578918.5.62.1.1.10.1.7 |
| ospfPmNbrLsRetransQLen The current length of the retransmission
queue. | column | SNMPv2-SMIGauge32 | .1.2.826.0.1.1578918.5.62.1.1.10.1.8 |
| ospfPmNbrStatus This object permits management of the table by
facilitating actions such as row creation,
construction and destruction. | column | SNMPv2-TCRowStatus | .1.2.826.0.1.1578918.5.62.1.1.10.1.9 |