ospfPmMultiAreaNbrRstrtHelpExitR
DC-OSPF-MIB ·
.1.3.6.1.4.1.629.10.3.1.29.1.16
Object
column
OspfRestartExitReason
Describes the outcome of the last attempt at acting as a hitless restart helper for the neighbor.
Context
- MIB
- DC-OSPF-MIB
- OID
.1.3.6.1.4.1.629.10.3.1.29.1.16- Type
- column
- Access
- readonly
- Status
- current
- Parent
- ospfPmMultiAreaNbrEntry
- Table
- ospfPmMultiAreaNbrTable
- Siblings
- 15
Syntax
OspfRestartExitReason
- Source
- OspfRestartExitReason
- Base type
Enumeration
Values & Constraints
Type Values
1 | none |
2 | inProgress |
3 | completed |
4 | timedOut |
5 | topologyChanged |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ospfPmMultiAreaNbrApplIndex Identifies this OSPF entity. | column | OspfPmIndex | .1.2.826.0.1.1578918.5.62.1.1.29.1.1 |
| ospfPmMultiAreaNbrEvents The number of times this neighbor relationship
has changed state, or an error has occurred. | column | SNMPv2-SMICounter32 | .1.2.826.0.1.1578918.5.62.1.1.29.1.10 |
| ospfPmMultiAreaNbrLsRetransQLen The current length of the retransmission
queue. | column | SNMPv2-SMIGauge32 | .1.2.826.0.1.1578918.5.62.1.1.29.1.11 |
| ospfPmMultiAreaNbrNumRequests The number of LSAs we have requested from this neighbor
for which we are still awaiting a response. This field is
incremented when an LSA is requested by sending a LS request
pac… | column | Unsigned32 | .1.2.826.0.1.1578918.5.62.1.1.29.1.12 |
| ospfPmMultiAreaNbrDeadTime The time remaining in seconds within which we need to
receive a hello packet from the neighbor or we declare the
multi-area adjacency down. If Fast Hellos are in use,
this value … | column | PositiveInteger | .1.2.826.0.1.1578918.5.62.1.1.29.1.13 |
| ospfPmMultiAreaNbrRstrtHelpSts Indicates whether the router is acting as a hitless
restart helper for the neighbor. | column | OspfRestartHelperStatus | .1.2.826.0.1.1578918.5.62.1.1.29.1.14 |
| ospfPmMultiAreaNbrRstrtHelpAge Remaining time in current OSPF hitless restart interval,
if the router is acting as a restart helper for the
neighbor. Set to zero if OSPF is not currently acting as
a restart he… | column | seconds ReturnedRefreshInterval | .1.2.826.0.1.1578918.5.62.1.1.29.1.15 |
| ospfPmMultiAreaNbrIfIpAddr The IP address of the primary OSPF interface over which
the neighbor can be reached. | column | SNMPv2-SMIIpAddress | .1.2.826.0.1.1578918.5.62.1.1.29.1.2 |
| ospfPmMultiAreaNbrAddrLessIf This variable takes the value 0 when the interface over
which the neighbor can be reached has an IP Address,
otherwise it takes the non-zero interface index value of
the OSPF inte… | column | IF-MIBInterfaceIndexOrZero | .1.2.826.0.1.1578918.5.62.1.1.29.1.3 |
| ospfPmMultiAreaNbrAreaId The area to which the adjacency to this neighbor belongs. | column | AreaID | .1.2.826.0.1.1578918.5.62.1.1.29.1.4 |
| ospfPmMultiAreaNbrRemoteAddr The IP address to which packets for this multi-area
adjacency are sent.
On point-to-point interfaces there is no need to configure
the remote address to send packet… | column | SNMPv2-SMIIpAddress | .1.2.826.0.1.1578918.5.62.1.1.29.1.5 |
| ospfPmMultiAreaNbrSrcIpAddr The IP address this neighbor is using as its IP Source
Address. Note that, on addressless links, this will not
be 0.0.0.0, but the address of another of the neighbor's
interfaces… | column | SNMPv2-SMIIpAddress | .1.2.826.0.1.1578918.5.62.1.1.29.1.6 |
| ospfPmMultiAreaNbrRtrId A 32-bit integer (represented as a type IpAddress)
uniquely identifying the neighboring router in the
Autonomous System. | column | RouterID | .1.2.826.0.1.1578918.5.62.1.1.29.1.7 |
| ospfPmMultiAreaNbrOptions A Bit Mask corresponding to the neighbor's options field.
Bit 0, if set, indicates that the system will operate on
Type of Service metrics other than TOS 0. If zer… | column | SNMPv2-SMIInteger32 | .1.2.826.0.1.1578918.5.62.1.1.29.1.8 |
| ospfPmMultiAreaNbrState The State of the relationship with this Neighbor. | column | OspfNeighborStates | .1.2.826.0.1.1578918.5.62.1.1.29.1.9 |