ospfPmMultiAreaLclLsdbChecksum

DC-OSPF-MIB · .1.3.6.1.4.1.629.10.3.1.30.1.11
MIB view Table view

Object

column SNMPv2-SMIInteger32 
This field is the checksum of the complete contents of the
advertisement, excepting the age field.  The age field is
excepted so that an advertisement's age can be incremented
without updating the checksum.  The checksum used is the
same that is used for ISO connectionless datagrams; it is
commonly referred to as the Fletcher checksum.

Context

MIB
DC-OSPF-MIB
OID
.1.3.6.1.4.1.629.10.3.1.30.1.11
Type
column
Access
readonly
Status
current
Parent
ospfPmMultiAreaLclLsdbEntry
Table
ospfPmMultiAreaLclLsdbTable
Siblings
11

Syntax

SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
ospfPmMultiAreaLclLsdbApplIndex
Identifies this OSPF entity.
columnOspfPmIndex.1.2.826.0.1.1578918.5.62.1.1.30.1.1
ospfPmMultiAreaLclLsdbAge
This field is the age of the link state advertisement in seconds.
columnSNMPv2-SMIInteger32.1.2.826.0.1.1578918.5.62.1.1.30.1.10
ospfPmMultiAreaLclLsdbAdvert
The entire Link State Advertisement, including its header.
columnOctetString.1.2.826.0.1.1578918.5.62.1.1.30.1.12
ospfPmMultiAreaLclLsdbIpAddr
The IP Address of the interface from which the LSA was received if the interface is numbered.
columnSNMPv2-SMIIpAddress.1.2.826.0.1.1578918.5.62.1.1.30.1.2
ospfPmMultiAreaLclLsdbAddrLssIf
The Interface Index of the interface from which the LSA was received if the interface is unnumbered.
columnIF-MIBInterfaceIndexOrZero.1.2.826.0.1.1578918.5.62.1.1.30.1.3
ospfPmMultiAreaLclLsdbAreaId
A 32-bit integer uniquely identifying the area to which the multi-area interface from which the LSA was received connects. Area ID 0.0.0.0 is used for the OSPF backbone.
columnAreaID.1.2.826.0.1.1578918.5.62.1.1.30.1.4
ospfPmMultiAreaLclLsdbRemAddr
The IP address to which packets for this multi-area adjacency are sent. On point-to-point interfaces there is no need to configure the remote address to send packet…
columnSNMPv2-SMIIpAddress.1.2.826.0.1.1578918.5.62.1.1.30.1.5
ospfPmMultiAreaLclLsdbType
The type of the link state advertisement. Each link state type has a separate advertisement format.
columnOspfLinkLsTypes.1.2.826.0.1.1578918.5.62.1.1.30.1.6
ospfPmMultiAreaLclLsdbLsid
The Link State ID is an LS Type Specific field containing a 32 bit identifier in IP address format; it identifies the piece of the routing domain that is being described by the ad…
columnSNMPv2-SMIIpAddress.1.2.826.0.1.1578918.5.62.1.1.30.1.7
ospfPmMultiAreaLclLsdbRtrId
The 32 bit number that uniquely identifies the originating router in the Autonomous System.
columnRouterID.1.2.826.0.1.1578918.5.62.1.1.30.1.8
ospfPmMultiAreaLclLsdbSequence
The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The l…
columnSNMPv2-SMIInteger32.1.2.826.0.1.1578918.5.62.1.1.30.1.9