ospfPmIfSwitchEntry
DC-OSPF-MIB ·
.1.3.6.1.4.1.629.10.3.1.21.1
Object
row
The OSPF Interface Switching Descriptor Entry describes the switching capabilities of the interfaces on the router.
Context
- MIB
- DC-OSPF-MIB
- OID
.1.3.6.1.4.1.629.10.3.1.21.1- Type
- row
- Status
- current
- Parent
- ospfPmIfSwitchTable
- Table
- ospfPmIfSwitchTable
- Children
- 27
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ospfPmIfSwitchApplIndex Identifies the DC-OSPF entity. | column | OspfPmIndex | .1.2.826.0.1.1578918.5.62.1.1.21.1.1 |
| ospfPmIfSwitchMaxLSPBwidth2 The MAX LSP bandwidth on this interface, at the third priority
level, in IEEE floating point format, used by CSPF to calculate
constrained routes. The units are bytes per second.… | column | SNMPv2-SMIInteger32 | .1.2.826.0.1.1578918.5.62.1.1.21.1.10 |
| ospfPmIfSwitchLastMaxLSPBwidth2 The last advertised MAX LSP Bandwidth at the third priority
level for this interface. | column | SNMPv2-SMIInteger32 | .1.2.826.0.1.1578918.5.62.1.1.21.1.11 |
| ospfPmIfSwitchMaxLSPBwidth3 The MAX LSP bandwidth on this interface, at the fourth priority
level, in IEEE floating point format, used by CSPF to calculate
constrained routes. The units are bytes per second… | column | SNMPv2-SMIInteger32 | .1.2.826.0.1.1578918.5.62.1.1.21.1.12 |
| ospfPmIfSwitchLastMaxLSPBwidth3 The last advertised MAX LSP Bandwidth at the fourth priority
level for this interface. | column | SNMPv2-SMIInteger32 | .1.2.826.0.1.1578918.5.62.1.1.21.1.13 |
| ospfPmIfSwitchMaxLSPBwidth4 The MAX LSP bandwidth on this interface, at the fifth priority
level, in IEEE floating point format, used by CSPF to calculate
constrained routes. The units are bytes per second.… | column | SNMPv2-SMIInteger32 | .1.2.826.0.1.1578918.5.62.1.1.21.1.14 |
| ospfPmIfSwitchLastMaxLSPBwidth4 The last advertised MAX LSP Bandwidth at the fifth priority
level for this interface. | column | SNMPv2-SMIInteger32 | .1.2.826.0.1.1578918.5.62.1.1.21.1.15 |
| ospfPmIfSwitchMaxLSPBwidth5 The MAX LSP bandwidth on this interface, at the sixth priority
level, in IEEE floating point format, used by CSPF to calculate
constrained routes. The units are bytes per second.… | column | SNMPv2-SMIInteger32 | .1.2.826.0.1.1578918.5.62.1.1.21.1.16 |
| ospfPmIfSwitchLastMaxLSPBwidth5 The last advertised MAX LSP Bandwidth at the sixth priority
level for this interface. | column | SNMPv2-SMIInteger32 | .1.2.826.0.1.1578918.5.62.1.1.21.1.17 |
| ospfPmIfSwitchMaxLSPBwidth6 The MAX LSP bandwidth on this interface, at the seventh priority
level, in IEEE floating point format, used by CSPF to calculate
constrained routes. The units are bytes per secon… | column | SNMPv2-SMIInteger32 | .1.2.826.0.1.1578918.5.62.1.1.21.1.18 |
| ospfPmIfSwitchLastMaxLSPBwidth6 The last advertised MAX LSP Bandwidth at the seventh priority
level for this interface. | column | SNMPv2-SMIInteger32 | .1.2.826.0.1.1578918.5.62.1.1.21.1.19 |
| ospfPmIfSwitchIpAddress The IP address of this OSPF interface. | column | SNMPv2-SMIIpAddress | .1.2.826.0.1.1578918.5.62.1.1.21.1.2 |
| ospfPmIfSwitchMaxLSPBwidth7 The MAX LSP bandwidth on this interface, at the eighth priority
level, in IEEE floating point format, used by CSPF to calculate
constrained routes. The units are bytes per second… | column | SNMPv2-SMIInteger32 | .1.2.826.0.1.1578918.5.62.1.1.21.1.20 |
| ospfPmIfSwitchLastMaxLSPBwidth7 The last advertised MAX LSP Bandwidth at the eighth priority
level for this interface. | column | SNMPv2-SMIInteger32 | .1.2.826.0.1.1578918.5.62.1.1.21.1.21 |
| ospfPmIfSwitchMinLSPBwidth Specific information about the switching capability for this
interface. This represents the Minimium LSP bandwidth for this
interface. | column | SNMPv2-SMIInteger32 | .1.2.826.0.1.1578918.5.62.1.1.21.1.22 |
| ospfPmIfSwitchLastMinLSPBwidth The last advertised Min LSP Bandwidth on this interface. | column | SNMPv2-SMIInteger32 | .1.2.826.0.1.1578918.5.62.1.1.21.1.23 |
| ospfPmIfSwitchMTUSize Specific information about the switching capability for this
interface. This field reports the Maximum Transmission Unit size for
this type of traffic. Note that this can supers… | column | SNMPv2-SMIInteger32 | .1.2.826.0.1.1578918.5.62.1.1.21.1.24 |
| ospfPmIfSwitchLastMTUSize The last advertised Min LSP Bandwidth on this interface. | column | SNMPv2-SMIInteger32 | .1.2.826.0.1.1578918.5.62.1.1.21.1.25 |
| ospfPmIfSwitchSonetSdhSupport The SONET or SDH supported on this interface. | column | OspfPmIfSwitchSonetSdhValue | .1.2.826.0.1.1578918.5.62.1.1.21.1.26 |
| ospfPmIfSwitchISDIndex An arbitrary index used to distinguish between Interface Switching
Descriptors that are different, but have the same capability and
encoding. | column | DC-MASTER-TCNumericIndex | .1.2.826.0.1.1578918.5.62.1.1.21.1.27 |
| ospfPmIfSwitchAddressLessIf For the purpose of easing the instancing of
addressed and address less interfaces; This
variable takes the value 0 on interfaces with
IP Addresses, and the corresponding value of
… | column | IF-MIBInterfaceIndexOrZero | .1.2.826.0.1.1578918.5.62.1.1.21.1.3 |
| ospfPmIfSwitchingCap The switching capability of the interface. Possible values are as
follows:
- 1 Packet-Switch Capable-1
- 2 Packet-Switch Capable-2
- 3 Packet-Switch Capable-… | column | OspfPmIfSwitchCapValue | .1.2.826.0.1.1578918.5.62.1.1.21.1.4 |
| ospfPmIfSwitchEncoding The type of encoding used on this interface. Possible values are as
follows:
- 1 Packet
- 2 Ethernet
- 3 ANSI-ETSI-PDH
- 5 SDH-SONET
- 7 DIG-Wr… | column | OspfPmIfSwitchEncodingValue | .1.2.826.0.1.1578918.5.62.1.1.21.1.5 |
| ospfPmIfSwitchMaxLSPBwidth0 The MAX LSP bandwidth on this interface, at the first priority
level, in IEEE floating point format, used by CSPF to calculate
constrained routes. The units are bytes per second.… | column | SNMPv2-SMIInteger32 | .1.2.826.0.1.1578918.5.62.1.1.21.1.6 |
| ospfPmIfSwitchLastMaxLSPBwidth0 The last advertised MAX LSP Bandwidth at the first priority
level for this interface. | column | SNMPv2-SMIInteger32 | .1.2.826.0.1.1578918.5.62.1.1.21.1.7 |
| ospfPmIfSwitchMaxLSPBwidth1 The MAX LSP bandwidth on this interface, at the second priority
level, in IEEE floating point format, used by CSPF to calculate
constrained routes. The units are bytes per second… | column | SNMPv2-SMIInteger32 | .1.2.826.0.1.1578918.5.62.1.1.21.1.8 |
| ospfPmIfSwitchLastMaxLSPBwidth1 The last advertised MAX LSP Bandwidth at the second priority
level for this interface. | column | SNMPv2-SMIInteger32 | .1.2.826.0.1.1578918.5.62.1.1.21.1.9 |
Indexes
| Object | Type | Syntax | OID |
|---|---|---|---|
| ospfPmIfSwitchApplIndex Identifies the DC-OSPF entity. | column | OspfPmIndex | .1.2.826.0.1.1578918.5.62.1.1.21.1.1 |
| ospfPmIfSwitchIpAddress The IP address of this OSPF interface. | column | SNMPv2-SMIIpAddress | .1.2.826.0.1.1578918.5.62.1.1.21.1.2 |
| ospfPmIfSwitchAddressLessIf For the purpose of easing the instancing of
addressed and address less interfaces; This
variable takes the value 0 on interfaces with
IP Addresses, and the corresponding value of
… | column | IF-MIBInterfaceIndexOrZero | .1.2.826.0.1.1578918.5.62.1.1.21.1.3 |
| ospfPmIfSwitchingCap The switching capability of the interface. Possible values are as
follows:
- 1 Packet-Switch Capable-1
- 2 Packet-Switch Capable-2
- 3 Packet-Switch Capable-… | column | OspfPmIfSwitchCapValue | .1.2.826.0.1.1578918.5.62.1.1.21.1.4 |
| ospfPmIfSwitchEncoding The type of encoding used on this interface. Possible values are as
follows:
- 1 Packet
- 2 Ethernet
- 3 ANSI-ETSI-PDH
- 5 SDH-SONET
- 7 DIG-Wr… | column | OspfPmIfSwitchEncodingValue | .1.2.826.0.1.1578918.5.62.1.1.21.1.5 |
| ospfPmIfSwitchISDIndex An arbitrary index used to distinguish between Interface Switching
Descriptors that are different, but have the same capability and
encoding. | column | DC-MASTER-TCNumericIndex | .1.2.826.0.1.1578918.5.62.1.1.21.1.27 |