mplsCvTrMpCvInterval
DC-OAM-LSP-PING-MIB ·
.1.3.6.1.4.1.629.10.12.1.1.1.6
Object
column
r/w
milliseconds Unsigned32
This attribute specifies the period between LSP Ping Echo
Request transmissions in an LSP Ping Connectivity Verification
transaction. Granularity of 100ms is required.
The transmission of the next LSP Ping message is not dependent
upon the reception of the previous LSP Ping response.
An interval count of '0' indicates that the subsequent LSP Ping
is sent with the minimum possible delay.
This field is only relevant for an LSP Ping Connectivity
Verification transaction.
Context
- MIB
- DC-OAM-LSP-PING-MIB
- OID
.1.3.6.1.4.1.629.10.12.1.1.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Units
- milliseconds
- Parent
- mplsCvTrMpEntry
- Table
- mplsCvTrMpTable
- Siblings
- 16
Syntax
milliseconds Unsigned32
Values & Constraints
Object Constraints
range: 1-60000
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mplsCvTrMpIndex This index is used to uniquely identifies the Maintenance Point
(MP). This is defined to be the interface index for the
Maintenance Point. | column | DC-MASTER-TCNumericIndex | .1.3.6.1.4.1.629.10.12.1.1.1.1 |
| mplsCvTrMpCvRvsReturnCode This field contains the return code for the reverse FEC
verification, if such verification was requested (that is, if
mplsCvTrMpCvVerifyReverse was set to ATG_TRUE when the transa… | column | Enumeration | .1.3.6.1.4.1.629.10.12.1.1.1.10 |
| mplsCvTrMpCvRepliesRcvd The number of valid LSP Ping replies received.
This field is only relevant for an LSP Ping Connectivity
Verification transaction. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.629.10.12.1.1.1.11 |
| mplsCvTrMpCvRoundTripMin The minimum time between sending an LSP Ping Request and
receiving the response.
This field is only relevant for an LSP Ping Connectivity
Verification transaction. | column | milliseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.629.10.12.1.1.1.12 |
| mplsCvTrMpCvRoundTripAve The average time between sending an LSP Ping Request and
receiving the response.
This field is only relevant for an LSP Ping Connectivity
Verification transaction. | column | milliseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.629.10.12.1.1.1.13 |
| mplsCvTrMpCvRoundTripMax The maximum time between sending an LSP Ping Request and
receiving the response.
This field is only relevant for an LSP Ping Connectivity
Verification transaction. | column | milliseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.629.10.12.1.1.1.14 |
| mplsCvTrMpTrStatus This field is set to TRUE to initiate an LSP Ping Traceroute
transaction. Changing this field from TRUE to FALSE will cancel
the Traceroute transaction that is in progress. Settin… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.629.10.12.1.1.1.15 |
| mplsCvTrMpTimeout This attribute specifies the maximum amount of time that the
originator waits for a response before considering
the request lost. | column | milliseconds Unsigned32 | .1.3.6.1.4.1.629.10.12.1.1.1.16 |
| mplsCvTrMpTrReturnCode This field contains the result of the LSP Ping Traceroute
transaction for the last hop received. If no hops have been
received, this field contains a return code of
AMB_MPLS_OAMM… | column | Enumeration | .1.3.6.1.4.1.629.10.12.1.1.1.17 |
| mplsCvTrMpRowStatus Used to create and delete an MPLS CV TR MP Table entry. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.629.10.12.1.1.1.2 |
| mplsCvTrMpPhb This field defines the Per-hop Behavior (PHB) value for LSP
Ping messages. A value of zero means that no specific PHB is
defined. | column | Integer32 | .1.3.6.1.4.1.629.10.12.1.1.1.3 |
| mplsCvTrMpCvStatus This field is set to TRUE to initiate an LSP Ping Connectivity
Verification transaction. Changing this field from TRUE to FALSE
will cancel the Connectivity Verification transacti… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.629.10.12.1.1.1.4 |
| mplsCvTrMpCvMessages The number of LSP Ping Echo Requests to be transmitted in this
transaction.
This field is only relevant for an LSP Ping Connectivity
Verification transaction. | column | Unsigned32 | .1.3.6.1.4.1.629.10.12.1.1.1.5 |
| mplsCvTrMpCvVerifyReverse This field defines whether the LSP Ping transaction should
verify the reverse path of the LSP.
This field is only relevant for an LSP Ping Connectivity
Verification… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.629.10.12.1.1.1.7 |
| mplsCvTrMpCvTtl This field specifies the TTL to be set in each LSP Ping Packet.
This field is only relevant for an LSP Ping Connectivity
Verification transaction. | column | Unsigned32 | .1.3.6.1.4.1.629.10.12.1.1.1.8 |
| mplsCvTrMpCvReturnCode This field contains the result of the LSP Ping Connectivity
Verification transaction.
This field is only relevant for an LSP Ping Connectivity
Verification transact… | column | Enumeration | .1.3.6.1.4.1.629.10.12.1.1.1.9 |