dcLmgrLsrEntityMaxLsiBuffers
DC-LMGR-MIB ·
.1.2.826.0.1.1578918.5.32.1.1.1.1.6
Object
Maximum number of buffers to allocate for Label Switch
Interface requests. A value of 0 means no maximum.
This field can not be changed when the row is active.
Context
- MIB
- DC-LMGR-MIB
- OID
.1.2.826.0.1.1578918.5.32.1.1.1.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- dcLmgrLsrEntityEntry
- Table
- dcLmgrLsrEntityTable
- Siblings
- 26
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| dcLmgrLsrEntityLsrIndex LSR index for this dcLmgrLsrEntityEntry. This is the
entity index passed in the Label Manager create
parameters. | column | DcLmgrIndex | .1.2.826.0.1.1578918.5.32.1.1.1.1.1 |
| dcLmgrLsrEntityTranAddrType The type of the internetwork layer address used as the
transport address. Currently this must be IPv4. See
dcLmgrLsrEntityIpv6TranAddr, below, for the equivalent
field for use i… | column | INET-ADDRESS-MIBInetAddressType | .1.2.826.0.1.1578918.5.32.1.1.1.1.10 |
| dcLmgrLsrEntityTranAddrLen The length of the internetwork layer address used as the
transport address for LDP Hello messages in the global
label space and for messages originating on unnumbered
interfaces i… | column | SNMPv2-SMIUnsigned32 | .1.2.826.0.1.1578918.5.32.1.1.1.1.11 |
| dcLmgrLsrEntityTranAddr The value of the internetwork layer address used as the
transport address for LDP Hello messages in the global
label space and for messages originating on unnumbered
interfaces in… | column | INET-ADDRESS-MIBInetAddress | .1.2.826.0.1.1578918.5.32.1.1.1.1.12 |
| dcLmgrLsrEntityControlMode The LSP control mode that this LSR should adopt.
This field is only used by Label Manager in systems where
it supports LDP and/or CR-LDP. | column | DcLmgrControlModes | .1.2.826.0.1.1578918.5.32.1.1.1.1.13 |
| dcLmgrLsrEntityMergeLsps Whether this LSR should aim to merge LSPs, where permitted
by the underlying hardware.
This field is only used by Label Manager in systems where
it supports LDP and/or CR-LDP. | column | SNMPv2-TCTruthValue | .1.2.826.0.1.1578918.5.32.1.1.1.1.14 |
| dcLmgrLsrEntityLoopDetection Whether this LSR should perform loop detection.
This field is only used by Label Manager in systems where
it supports LDP and/or CR-LDP. | column | SNMPv2-TCTruthValue | .1.2.826.0.1.1578918.5.32.1.1.1.1.15 |
| dcLmgrLsrEntityPerformGrouping Whether Label Manager should perform LSP grouping on
behalf of the LDBI user. This field is currently only
used for systems supporting RSVP. | column | SNMPv2-TCTruthValue | .1.2.826.0.1.1578918.5.32.1.1.1.1.16 |
| dcLmgrLsrAutoStaticLsps Whether Label Manager should automatically activate or
deactivate static LSPs when the interfaces on which they
depend become active or inactive. | column | SNMPv2-TCTruthValue | .1.2.826.0.1.1578918.5.32.1.1.1.1.17 |
| dcLmgrLsrDisplayPhpXCs Whether Label Manager should display the virtual cross
connects its sets up at the Egress node of Implicit Null
and Explicit Null LSPs in the mplsXcTable. These cross
connects do… | column | SNMPv2-TCTruthValue | .1.2.826.0.1.1578918.5.32.1.1.1.1.18 |
| dcLmgrLsrEntityIpv6TranAddr The value of the internetwork address used for messages
originating on unnumbered interfaces in RSVP in an IPv6
network.
This value also uniquely identifies this LS… | column | INET-ADDRESS-MIBInetAddress | .1.2.826.0.1.1578918.5.32.1.1.1.1.19 |
| dcLmgrLsrEntityAdminStatus Administrative status for Label Manager. When
dcLmgrLsrEntityRowStatus is 'active' and
dcLmgrLsrEntityAdminStatus is 'up' Label Manager is
active and only these two fields and
dcL… | column | DcLmgrAdminStatus | .1.2.826.0.1.1578918.5.32.1.1.1.1.2 |
| dcLmgrLsrEnableStaticP2MP Whether Label Manager should allow configuration of
static point-to-multipoint LSPs.
Disabling point-to-multipoint support causes any
statically configured point-to… | column | SNMPv2-TCTruthValue | .1.2.826.0.1.1578918.5.32.1.1.1.1.20 |
| dcLmgrLsrStaticP2MPActive The current state of support for static
point-to-multipoint LSPs. This field is set to true when
support for static point-to-multipoint LSPs is enabled.
It is set to false when s… | column | SNMPv2-TCTruthValue | .1.2.826.0.1.1578918.5.32.1.1.1.1.21 |
| dcLmgrLsrLsiEntIndex The index of the Label Switch Controller instance which
this LMGR is to join to as its LSI interface provider. If
this value is not specified, or the value of this object
is 0, L… | column | DC-MASTER-TCNumericIndexOrZero | .1.2.826.0.1.1578918.5.32.1.1.1.1.22 |
| dcLmgrLsrI3EntIndex The index of the I3 entity which this LMGR is to join to
as its I3 interface provider. If this value is not
specified, or the value of this object is 0, LMGR will use
the dcLmgrL… | column | DC-MASTER-TCNumericIndexOrZero | .1.2.826.0.1.1578918.5.32.1.1.1.1.23 |
| dcLmgrLabelReleaseDelay A length of time (in seconds) to wait after releasing an
MPLS label before the label will be released to the
general pool to be assigned to new LSPs.
Changes made t… | column | SNMPv2-SMIUnsigned32 | .1.2.826.0.1.1578918.5.32.1.1.1.1.24 |
| dcLmgrGlobalId The Global ID is defined in RFC 6370 and uniquely
identifies an operator. It is derived from a 4-octet AS
number assigned to the operator and is used solely to
provide a globally… | column | SNMPv2-SMIUnsigned32 | .1.2.826.0.1.1578918.5.32.1.1.1.1.25 |
| dcLmgrNodeId The Node ID is defined in RFC 6370 and is assigned by the
operator within the scope of a Global ID. | column | SNMPv2-SMIUnsigned32 | .1.2.826.0.1.1578918.5.32.1.1.1.1.26 |
| dcLmgrFtMode The fault tolerant mode used by Label Manager if used in a
fault tolerant environment. The default value is full
replication which should be used in conjunction with full
replica… | column | DcLmgrFtModes | .1.2.826.0.1.1578918.5.32.1.1.1.1.27 |
| dcLmgrLsrEntityOperStatus The current operational status of the Label Manager
entity. | column | DcLmgrOperStatus | .1.2.826.0.1.1578918.5.32.1.1.1.1.3 |
| dcLmgrLsrEntityRowStatus Row status for the Label Manager table entry, used to
create and destroy table entries. When
dcLmgrLsrEntityRowStatus is 'active' and
dcLmgrLsrEntityAdminStatus is 'up' Label Mana… | column | SNMPv2-TCRowStatus | .1.2.826.0.1.1578918.5.32.1.1.1.1.4 |
| dcLmgrLsrEntityMinLsiBuffers Minimum number of buffers to allocate for Label Switch
Interface requests. This number includes any buffers sent
to the Label Switch Controller and awaiting a response.
… | column | SNMPv2-SMIUnsigned32 | .1.2.826.0.1.1578918.5.32.1.1.1.1.5 |
| dcLmgrLscStatus Diagnostic field providing information about the status
of the Label Switch Controller as seen by Label Manager. | column | DcLmgrPartnerStatus | .1.2.826.0.1.1578918.5.32.1.1.1.1.7 |
| dcLmgrLdbCount Diagnostic field providing information about the number
of active interfaces between Label Manager and the its
Label Database Interface users (DC-TPM and DC-RSVP). | column | SNMPv2-SMIUnsigned32 | .1.2.826.0.1.1578918.5.32.1.1.1.1.8 |
| dcLmgrLsrEntityLsrId An ID that uniquely identifies this LSR within the
network.
The LSR ID is typically derived from one of the LSR's IPv4
addresses. It may be used for path vector ba… | column | SNMPv2-SMIUnsigned32 | .1.2.826.0.1.1578918.5.32.1.1.1.1.9 |