dccrldpSigConformanceFlags

DC-CR-LDP-MIB · .1.3.6.1.4.1.629.10.15.1.1.1.12
MIB view Table view

Object

column r/w Bits 
Flags specifying how DC-LDP Session Controller should
behave in situations either where the interpretation of
strict conformance is debatable, or where strictly
conformant behavior contradicts the general IETF principle
of being liberal on receipt.
              
maxPduLen  If set, this flag means that DC-LDP should
abort session initialization if the peer (in the passive
role) proposes a max PDU length that is larger than
DC-LDP's proposed value.  The interpretation here is that
the passive peer's value should be the already negotiated
value, not its raw value.

Context

MIB
DC-CR-LDP-MIB
OID
.1.3.6.1.4.1.629.10.15.1.1.1.12
Type
column
Access
readwrite
Status
current
Parent
dccrldpSigEntry
Table
dccrldpSigTable
Siblings
16

Syntax

Bits

Values & Constraints

Enumerated Values
0maxPduLen

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
dccrldpSigIndex
The index of this dccrldpSigEntry. This is the HAF entity index passed on the product create parameters.
columnDcCrldpIndex.1.2.826.0.1.1578918.5.35.1.1.1.1.1
dccrldpSigRowStatus
Used to create and delete a DC-CR-LDP Signaling Table entry. When this object is set to 'active', only the dccrldpSigAdminStatus object in the row may be modified.
columnSNMPv2-TCRowStatus.1.2.826.0.1.1578918.5.35.1.1.1.1.10
dccrldpSigUseI3Interface
Used to indicate whether this DC-CR-LDP Signaling instance should use the I3 interface or the IPR interface to determine information regarding local interface configuration. Use …
columnSNMPv2-TCTruthValue.1.2.826.0.1.1578918.5.35.1.1.1.1.11
dccrldpSigUseIPv6Transport
Used to indicate whether the DC-CR-LDP signaling is to use IPv6 transport where possible. Note that if DC-LDP is configured with an IPv4 transport address, IPv4 tra…
columnSNMPv2-TCTruthValue.1.2.826.0.1.1578918.5.35.1.1.1.1.13
dccrldpSigSessStatusTrapEnable
If this object is true, then it enables the generation of mplsLdpSessionUp and mplsLdpSessionDown traps, otherwise these traps are not generated.
columnSNMPv2-TCTruthValue.1.2.826.0.1.1578918.5.35.1.1.1.1.14
dccrldpSigSessThreshTrapEnable
If this object is true, then it enables the generation of mplsLdpInitSessionThresholdExceeded traps, otherwise these traps are not generated.
columnSNMPv2-TCTruthValue.1.2.826.0.1.1578918.5.35.1.1.1.1.15
dccrldpSigPathVecLimitTrapEnable
If this object is true, then it enables the generation of mplsLdpPathVectorLimitMismatch traps, otherwise these traps are not generated.
columnSNMPv2-TCTruthValue.1.2.826.0.1.1578918.5.35.1.1.1.1.16
dccrldpSigBfdProviderIndex
The index of the BFDI provider instance to which this DC-LDP Signaling is to join as its BFD interface provider. See bfdEntityTable. Zero indicates that no BFDI pro…
columnSNMPv2-SMIInteger32.1.2.826.0.1.1578918.5.35.1.1.1.1.17
dccrldpSigPathManagerIndex
The index of the Path Manager instance to which this instance of Signaling is to join. See dccrldpPmTable.
columnDcCrldpIndex.1.2.826.0.1.1578918.5.35.1.1.1.1.2
dccrldpSigLsrIndex
The index of the DC-LMGR product instance to which this DC-CR-LDP Signaling is to join as its LDB interface provider. See dclmgrLsrEntityTable.
columnSNMPv2-SMIUnsigned32.1.2.826.0.1.1578918.5.35.1.1.1.1.3
dccrldpSigSocketIfIndex
Management assigned interface identifier for the IP Sockets component interface to DC-CR-LDP Signalling.
columnIF-MIBInterfaceIndexOrZero.1.2.826.0.1.1578918.5.35.1.1.1.1.4
dccrldpSigSessionBufPoolSize
The number of pre-reserved buffers available for sending sockets and LDI messages for each LDP session. This is used to pace the sockets and LDI data flows for each LDP session.
columnSNMPv2-SMIInteger32.1.2.826.0.1.1578918.5.35.1.1.1.1.5
dccrldpSigEMBufPoolSize
The number of pre-reserved buffers available for sending sockets, LDBI, NHR and I3 messages within Entity Manager This is used to pace Entity Manager's sockets, LDBI, NHR and I3 d…
columnSNMPv2-SMIInteger32.1.2.826.0.1.1578918.5.35.1.1.1.1.6
dccrldpSigAMBufPoolSize
The number of pre-reserved buffers available for sending sockets messages within Adjacency Manager. This is used to pace Adjacency Manager's sockets data flows.
columnSNMPv2-SMIInteger32.1.2.826.0.1.1578918.5.35.1.1.1.1.7
dccrldpSigAdminStatus
This object is used to activate the DC-CR-LDP Signaling instance.
columnDcCrldpAdminStatus.1.2.826.0.1.1578918.5.35.1.1.1.1.8
dccrldpSigOperStatus
The current operational status of this instance of DC-CR-LDP Signaling.
columnDcCrldpOperStatus.1.2.826.0.1.1578918.5.35.1.1.1.1.9