bgpRmEntMedConfed
DC-BGP-MIB ·
.1.2.826.42.1.1578918.5.65.1.2.1.1.68
Object
This field indicates whether DC-BGP carries out multi-exit
discriminator (MED) comparison to determine the preferred
route from two BGP routes originating from the local
confederation.
If this is FALSE then DC-BGP does not carry out MED
comparison between BGP routes whose AS paths are either
empty or contain only confederation segment types.
If this is TRUE then DC-BGP additionally carries out MED
comparison between two BGP routes matching the above criteria.
This is the default behavior and is required for DC-BGP to
use the decision process as defined in the BGP standards.
All BGP routers in an AS should have the same
configuration for this field to avoid routing loops.
This field can only be changed when the Admin Status is
down.
Context
- MIB
- DC-BGP-MIB
- OID
.1.2.826.42.1.1578918.5.65.1.2.1.1.68- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- bgpRmEntEntry
- Table
- bgpRmEntTable
- Siblings
- 98
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| bgpRmEntIndex Identifies a RIB Manager entity. | column | SNMPv2-SMIUnsigned32 | .1.2.826.42.1.1578918.5.65.1.2.1.1.1 |
| bgpRmEntIpv4MultiSupport obsolete This value is TRUE if Multicast IPv4 is supported.
This field can only be changed when the Admin Status is
down. | column | SNMPv2-TCTruthValue | .1.2.826.42.1.1578918.5.65.1.2.1.1.10 |
| bgpRmEntVPSiteInfoRemote This field is used to include remote site information
(tenant-name(s), wan-ip(s), cpu-load, mem-load, site-identification)
in versa-private routes. | column | SNMPv2-TCTruthValue | .1.2.826.42.1.1578918.5.65.1.2.1.1.100 |
| bgpRmEntCommOldFormat If set to 'true' the set and match communities in the route
maps will be processed in the old format i.e. as a 4 byte
number. | column | SNMPv2-TCTruthValue | .1.2.826.42.1.1578918.5.65.1.2.1.1.101 |
| bgpRmEntVpnIpv4Support obsolete This value is TRUE if VPN-IPv4 addresses for MPLS/BGP
VPNs are supported. This field can only be changed when
the Admin Status is down. | column | SNMPv2-TCTruthValue | .1.2.826.42.1.1578918.5.65.1.2.1.1.11 |
| bgpRmEntFlapDeltat This is the time granularity used to perform all decay
computations. This field can only be changed when the
Admin Status is down. | column | seconds Unsigned32 | .1.2.826.42.1.1578918.5.65.1.2.1.1.12 |
| bgpRmEntFlapReusemax This is the time corresponding to the last reuse list. This
is the maximum value of T-hold that may be configured in the
bgpFlapConfigTable table. This field can only be changed
… | column | seconds Unsigned32 | .1.2.826.42.1.1578918.5.65.1.2.1.1.13 |
| bgpRmEntFlapReusesize This is the number of reuse lists. This field, together with
bgpRmEntFlapReusemax, fixes the time interval that each reuse
list covers. This field can only be changed when the A… | column | Unsigned32 | .1.2.826.42.1.1578918.5.65.1.2.1.1.14 |
| bgpRmEntFlapReusearray This is the size of the reuse index arrays. This size
determines the accuracy with which suppressed routes can be
placed within the set of reuse lists when suppressed for a
long … | column | SNMPv2-SMIUnsigned32 | .1.2.826.42.1.1578918.5.65.1.2.1.1.15 |
| bgpRmEntFlapFreemax This is the maximum length of time for which a penalty against
a route this is not available shall be remebered, across all
configurations in the bgpFlapConfigTable. This field c… | column | seconds SNMPv2-SMIUnsigned32 | .1.2.826.42.1.1578918.5.65.1.2.1.1.16 |
| bgpRmEntNoRefresh This is set to TRUE to prevent automatic route refresh
when a policy update has occurred.
This field allows several policy updates to be followed by
a single route … | column | SNMPv2-TCTruthValue | .1.2.826.42.1.1578918.5.65.1.2.1.1.17 |
| bgpRmEntDefLocalPref The default value used for the local preference if one is not
set up through the filtering process. This field can only be
changed when the Admin Status is down. | column | SNMPv2-SMIUnsigned32 | .1.2.826.42.1.1578918.5.65.1.2.1.1.18 |
| bgpRmEntAlwaysCompMed This is set to TRUE to always compare the MULTI-EXIT-DESC
route attribute in the BGP decision process, even if the
routes in consideration were learned from different autonomous
s… | column | SNMPv2-TCTruthValue | .1.2.826.42.1.1578918.5.65.1.2.1.1.19 |
| bgpRmEntRowStatus The row status for this RIB Manager Entity Table entry,
used to create and destroy table entries. | column | SNMPv2-TCRowStatus | .1.2.826.42.1.1578918.5.65.1.2.1.1.2 |
| bgpRmEntAggregateMed If FALSE, then routes will only be aggregated if they
have matching MULTI-EXIT-DISC route attributes. This
means that operation is in strict compliance with the
specification. If… | column | SNMPv2-TCTruthValue | .1.2.826.42.1.1578918.5.65.1.2.1.1.20 |
| bgpRmEntDeterministicMed This is set to TRUE to enable deterministic MULTI-EXIT-DESC
processing. If set to FALSE, the selection of routes by the
BGP decision process is non-deterministic, because of the
… | column | SNMPv2-TCTruthValue | .1.2.826.42.1.1578918.5.65.1.2.1.1.21 |
| bgpRmEntNhrJoinStatus obsolete The status of the NHR Interface join. | column | BgpMjStatus | .1.2.826.42.1.1578918.5.65.1.2.1.1.22 |
| bgpRmEntNhrEntIndex obsolete Identifies the NHR Interface routing stub entity. This field
can only be changed when the Admin Status is down. | column | SNMPv2-SMIUnsigned32 | .1.2.826.42.1.1578918.5.65.1.2.1.1.23 |
| bgpRmEntI3JoinStatus The status of the I3 join. | column | BgpMjStatus | .1.2.826.42.1.1578918.5.65.1.2.1.1.24 |
| bgpRmEntI3EntIndex Identifies the I3 Interface routing stub entity. This field
can only be changed when the Admin Status is down. | column | SNMPv2-SMIUnsigned32 | .1.2.826.42.1.1578918.5.65.1.2.1.1.25 |
| bgpRmEntPauseThreshold The RM component can be configured to limit the amount of
work that it carries out in a single cycle of the N-BASE
scheduler. The component maintains a work penalty that is set
t… | column | SNMPv2-SMIUnsigned32 | .1.2.826.42.1.1578918.5.65.1.2.1.1.26 |
| bgpRmEntMaxIBgpEcmpRoutes The maximum number of Equal Cost BGP next-hops stored by
DC-BGP for a route learnt via internal BGP. This is also
the maximum number of network next-hops sent to the
routing tabl… | column | SNMPv2-SMIUnsigned32 | .1.2.826.42.1.1578918.5.65.1.2.1.1.27 |
| bgpRmEntMaxEBgpEcmpRoutes The maximum number of Equal Cost BGP next-hops stored by
DC-BGP for a route learnt via external BGP. This is also
the maximum number of network next-hops sent to the
routing tabl… | column | SNMPv2-SMIUnsigned32 | .1.2.826.42.1.1578918.5.65.1.2.1.1.28 |
| bgpRmEntRestartSupported Whether DC-BGP RIB Manager should execute graceful restart
procedures in the event of either a peer failure or its own
failure. This field can only be changed when the Admin Stat… | column | SNMPv2-TCTruthValue | .1.2.826.42.1.1578918.5.65.1.2.1.1.29 |
| bgpRmEntAdminStatus The administrative status of this RIB Manager entity,
used to activate and deactivate RM. | column | BgpAdminStatus | .1.2.826.42.1.1578918.5.65.1.2.1.1.3 |
| bgpRmEntMaxRestartTime This is the maximum time (in seconds) to wait for a
graceful restart capable peer to come back after a
peer restart or peer session failure.
This value is used when the value adve… | column | seconds Unsigned32 | .1.2.826.42.1.1578918.5.65.1.2.1.1.30 |
| bgpRmEntRecoveryTime The interval which DC-BGP should advertize to its peers as
the estimated time (in seconds) it will take for the BGP
session to be re-established after a local restart. This
can b… | column | seconds Unsigned32 | .1.2.826.42.1.1578918.5.65.1.2.1.1.31 |
| bgpRmEntDoGracefulRestart Indicates whether DC-BGP RIB Manager should execute
graceful restart procedures when it is restarted.
Executing graceful restart procedures ensures that routing
inf… | column | SNMPv2-TCTruthValue | .1.2.826.42.1.1578918.5.65.1.2.1.1.32 |
| bgpRmEntIpv4UniFwdPrsrvd obsolete This value should be set to TRUE if Unicast IPv4
forwarding state has been preserved over a restart, and the
value of the bgpRmEntRestartSupported field is set to TRUE. | column | SNMPv2-TCTruthValue | .1.2.826.42.1.1578918.5.65.1.2.1.1.33 |
| bgpRmEntIpv4MultiFwdPrsrvd obsolete This value should be set to TRUE if Multicast IPv4
forwarding state has been preserved over a restart, and the
value of the bgpRmEntRestartSupported field is set to TRUE. | column | SNMPv2-TCTruthValue | .1.2.826.42.1.1578918.5.65.1.2.1.1.34 |
| bgpRmEntVpnIpv4FwdPrsrvd obsolete This value should be set to TRUE if VPN-IPv4 forwarding
state has been preserved over a restart, and the
value of the bgpRmEntRestartSupported field is set to TRUE. | column | SNMPv2-TCTruthValue | .1.2.826.42.1.1578918.5.65.1.2.1.1.35 |
| bgpRmEntIpv4ArinhJoinStatus The status of the ARI Interface slave join for querying IPv4
next hops. This is equivalent to the bgpRmArinhJoinStatus
field within the bgpRmArinhJoinTable for the IPv4 Unicast
t… | column | BgpSjStatus | .1.2.826.42.1.1578918.5.65.1.2.1.1.36 |
| bgpRmEntIpv4ArinhEntIndex Identifies the IPv4 ARI provider entity. This is equivalent
to the bgpRmArinhEntIndex field within the
bgpRmArinhJoinTable for the IPv4 Unicast table entry. | column | SNMPv2-SMIUnsigned32 | .1.2.826.42.1.1578918.5.65.1.2.1.1.37 |
| bgpRmEntIpv6ArinhJoinStatus The status of the ARI Interface slave join for querying IPv6
next hops. This is equivalent to the bgpRmArinhJoinStatus
field within the bgpRmArinhJoinTable for the IPv6 Unicast
t… | column | BgpSjStatus | .1.2.826.42.1.1578918.5.65.1.2.1.1.38 |
| bgpRmEntIpv6ArinhEntIndex Identifies the IPv6 ARI provider entity. This is equivalent
to the bgpRmArinhEntIndex field within the
bgpRmArinhJoinTable for the IPv6 Unicast table entry. | column | SNMPv2-SMIUnsigned32 | .1.2.826.42.1.1578918.5.65.1.2.1.1.39 |
| bgpRmEntOperStatus The current operational status of this RIB Manager
entity. | column | BgpOperStatus | .1.2.826.42.1.1578918.5.65.1.2.1.1.4 |
| bgpRmEntSupportIpv6 Indicates whether this instance supports connections to BGP
peers with IPv6 addresses, and understands IPv6 next hop
addresses. This field must not be set to TRUE unless
IPv6 sup… | column | SNMPv2-TCTruthValue | .1.2.826.42.1.1578918.5.65.1.2.1.1.40 |
| bgpRmEntStrictConfed When set to TRUE DC-BGP insists upon strict adherence by peers
to the protocol specification, rejecting AS-Path attributes
with erroneous AS-Confed segments. When set to FALSE DC… | column | SNMPv2-TCTruthValue | .1.2.826.42.1.1578918.5.65.1.2.1.1.41 |
| bgpRmEntOrfSupported Whether DC-BGP RIB Manager should support Cooperative Route
Filtering (commonly referred to as Outbound Route Filtering
or ORF).
This field can only be changed when… | column | SNMPv2-TCTruthValue | .1.2.826.42.1.1578918.5.65.1.2.1.1.42 |
| bgpRmEntCiscoPrefixSupported Whether DC-BGP RIB Manager should advertise support for
the proprietary Cisco ORF prefix type.
This field can only be changed when the Admin Status is
down and is o… | column | SNMPv2-TCTruthValue | .1.2.826.42.1.1578918.5.65.1.2.1.1.43 |
| bgpRmEntSelectDeferTime The maximum time (in seconds) following local restart that
DC-BGP will wait before performing route selection.
The value specified should be large enough to provide… | column | seconds Unsigned32 | .1.2.826.42.1.1578918.5.65.1.2.1.1.44 |
| bgpRmEntStalePathTime The maximum time (in seconds) that DC-BGP will wait
following a peer restart or peer session failure before
removing stale routes from that peer.
The value must be … | column | seconds Unsigned32 | .1.2.826.42.1.1578918.5.65.1.2.1.1.45 |
| bgpRmEntNonPersistentAros obsolete This field is now retired. | column | SNMPv2-TCTruthValue | .1.2.826.42.1.1578918.5.65.1.2.1.1.46 |
| bgpRmEntAroRouteThreshold obsolete This field is now retired. | column | SNMPv2-SMIUnsigned32 | .1.2.826.42.1.1578918.5.65.1.2.1.1.47 |
| bgpRmEntMaxActiveAroGroups obsolete This field is now retired. | column | SNMPv2-SMIUnsigned32 | .1.2.826.42.1.1578918.5.65.1.2.1.1.48 |
| bgpRmEntNumArosInGroup obsolete This field is now retired. | column | SNMPv2-SMIUnsigned32 | .1.2.826.42.1.1578918.5.65.1.2.1.1.49 |
| bgpRmEntAsSize The size of AS numbers.
The semantics of this are determined as per RFC 4893. It is
equivalent to the Base Scalar bgpM2AsSize. This field can
only be changed when… | column | BgpAsSize | .1.2.826.42.1.1578918.5.65.1.2.1.1.5 |
| bgpRmEntNumAroRoutes The total number of Adj-RIB-Out routes currently allocated
across all Adj-RIBs-Out.
When additional paths are enabled, routes with different
path ID values count as… | column | SNMPv2-SMICounter32 | .1.2.826.42.1.1578918.5.65.1.2.1.1.50 |
| bgpRmEntPeakNumAroRoutes The peak number of Adj-RIB-Out routes that have been
allocated at any one time.
When additional paths are enabled, routes with different
path ID values count as dif… | column | SNMPv2-SMICounter32 | .1.2.826.42.1.1578918.5.65.1.2.1.1.51 |
| bgpRmEntClearStats Set to true to reset the bgpRmEntPeakNumAroRoutes field
and to clear the bgpRmAfiSafiTotNumPrefixAllocs,
bgpRmAfiSafiTotNumRouteAllocs,
bgpRmAfiSafiTotNumPrefixFrees and
bgpRmAfiS… | column | SNMPv2-TCTruthValue | .1.2.826.42.1.1578918.5.65.1.2.1.1.52 |
| bgpRmEntFastExtFallover Indicates whether DC-BGP is configured to perform fast
external fallover.
When bgpRmEntFastExtFallover is 'true', BGP sessions to
directly connected EBGP peers fail… | column | SNMPv2-TCTruthValue | .1.2.826.42.1.1578918.5.65.1.2.1.1.53 |
| bgpRmEntRemainDelayTime The maximum time remaining until route selection takes
place following a restart, in hundredths of a second. This
is the time left until the timer with duration
bgpRmEntSelectDef… | column | SNMPv2-TCTimeInterval | .1.2.826.42.1.1578918.5.65.1.2.1.1.54 |
| bgpRmEntPathAttrs The total number of path attributes present. | column | SNMPv2-SMIGauge32 | .1.2.826.42.1.1578918.5.65.1.2.1.1.55 |
| bgpRmEntAggSplitHorizon Indicates whether DC-BGP should apply split-horizon
processing when advertising locally generated aggregate
routes to a peer.
If set to TRUE, locally generated aggr… | column | SNMPv2-TCTruthValue | .1.2.826.42.1.1578918.5.65.1.2.1.1.56 |
| bgpRmEntAggAdvSuppr This field governs the behaviour of DC-BGP when a
locally-generated, summary aggregate route cannot be
advertised to a peer.
If set to TRUE, DC-BGP should attempt t… | column | SNMPv2-TCTruthValue | .1.2.826.42.1.1578918.5.65.1.2.1.1.57 |
| bgpRmEntUpdateGroups This field indicates that DC-BGP should combine peers into
update groups. This means that peers which have similar
configuration and export policies for a particular
AFI/SAFI wil… | column | SNMPv2-TCTruthValue | .1.2.826.42.1.1578918.5.65.1.2.1.1.58 |
| bgpRmEntPhase3DelayTime The time in seconds after the number of Established BGP
sessions changes from zero to one in which phase 3 work will
be postponed if there is still phase 1 or phase 2 work to
do.
… | column | Unsigned32 | .1.2.826.42.1.1578918.5.65.1.2.1.1.59 |
| bgpRmEntLocalAs The local autonomous system number.
For a router not in a confederation, it is equivalent to
the Base Scalar bgpM2LocalAs. For a router in a
confederation, it is e… | column | BgpAutonomousSystemNumber | .1.2.826.42.1.1578918.5.65.1.2.1.1.6 |
| bgpRmEntTrapOperState This value indicates whether or not the Oper State change
trap is used.
If in use DC-BGP will send a trap whenever the operational
status of the RM Entity changes t… | column | SNMPv2-TCTruthValue | .1.2.826.42.1.1578918.5.65.1.2.1.1.60 |
| bgpRmEntMaxASLimit The maximum number of AS numbers in the AS_PATH attribute
that is allowed in routes learned from peers. Routes
whose AS_PATH has more AS numbers than this limit are
filtered out.… | column | Unsigned32 | .1.2.826.42.1.1578918.5.65.1.2.1.1.61 |
| bgpRmEntRestartTimeLeft Remaining time before BGP graceful restart times out. | column | seconds Unsigned32 | .1.2.826.42.1.1578918.5.65.1.2.1.1.62 |
| bgpRmEntRestartExitReason Describes the outcome of the last attempt at a graceful
restart. If the value is 'none', no restart has yet been
attempted. If the value is 'inProgress', a restart
attempt is cu… | column | BgpRestartExitReason | .1.2.826.42.1.1578918.5.65.1.2.1.1.63 |
| bgpRmEntAsPathMultipathRelax This field indicates whether BGP routes with different
AS_PATHs can be used as equal cost routes.
If this is FALSE then DC-BGP only treats two BGP routes as
equal c… | column | SNMPv2-TCTruthValue | .1.2.826.42.1.1578918.5.65.1.2.1.1.64 |
| bgpRmEntAsPathIgnore This field indicates whether DC-BGP ignores AS path length
when determining the preferred route from two BGP routes.
If this is FALSE then DC-BGP treats the BGP rou… | column | SNMPv2-TCTruthValue | .1.2.826.42.1.1578918.5.65.1.2.1.1.65 |
| bgpRmEntPreferExistingRoute This field indicates how DC-BGP handles a tie when
determining the preferred route between two routes of
essentially equal cost received from BGP peers external to
the local AS or… | column | SNMPv2-TCTruthValue | .1.2.826.42.1.1578918.5.65.1.2.1.1.66 |
| bgpRmEntMedMissingAsWorst This field indicates whether DC-BGP treats the multi-exit
discriminator (MED) for a BGP route received with no MED
as having the worst possible priority value.
If t… | column | SNMPv2-TCTruthValue | .1.2.826.42.1.1578918.5.65.1.2.1.1.67 |
| bgpRmEntDynPeerRestartTime The time to wait (in seconds) for dynamic peers to
reconnect following local restart.
DC-BGP will wait at least this time following local
restart before performing … | column | seconds Unsigned32 | .1.2.826.42.1.1578918.5.65.1.2.1.1.69 |
| bgpRmEntConfederationId The confederation identifier.
This is an externally visible autonomous system number
that identifies the confederation as a whole.
This field is only… | column | BgpAutonomousSystemNumber | .1.2.826.42.1.1578918.5.65.1.2.1.1.7 |
| bgpRmEntCheckFirstAsNum Whether or not the first AS number in the AS_PATH
attribute in an UPDATE received from a peer should be
checked to make sure it is the same as the AS number of
the peer. This fla… | column | SNMPv2-TCTruthValue | .1.2.826.42.1.1578918.5.65.1.2.1.1.70 |
| bgpRmEntRibSizeWarning Limit on the total number of routes across all of DC-BGP's
Adj-RIBs-IN across all <AFI, SAFI>. (In other words, the
count of all locally-redistributed routes and routes
learned f… | column | Unsigned32 | .1.2.826.42.1.1578918.5.65.1.2.1.1.71 |
| bgpRmEntRtiName This value describes routing instance name. This value
is passed, while configuring the routing instance. | column | OctetString | .1.2.826.42.1.1578918.5.65.1.2.1.1.72 |
| bgpRmEntLmgrJoinStatus The status of the LMGR join. | column | BgpMjStatus | .1.2.826.42.1.1578918.5.65.1.2.1.1.73 |
| bgpRmEntLmgrEntIndex Identifies the LMGR entity. This field
can only be changed when the Admin Status is down. | column | SNMPv2-SMIUnsigned32 | .1.2.826.42.1.1578918.5.65.1.2.1.1.74 |
| bgpRmEntDebug This field is used to set debug flags of BGP Instance. | column | BgpDebugFlags | .1.2.826.42.1.1578918.5.65.1.2.1.1.75 |
| bgpRmEntLevel This field is used to set debug level of BGP Instance. | column | Unsigned32 | .1.2.826.42.1.1578918.5.65.1.2.1.1.76 |
| bgpRmEntAllFlagsEnabled This field is used to determine all flags enabled. | column | SNMPv2-TCTruthValue | .1.2.826.42.1.1578918.5.65.1.2.1.1.77 |
| bgpRmEntRxTxFlagsEnabled This field is used to determine rx/tx flags enabled. | column | SNMPv2-TCTruthValue | .1.2.826.42.1.1578918.5.65.1.2.1.1.78 |
| bgpRmEntProcId This field is used to get BGP RM entity processId. | column | SNMPv2-SMIUnsigned32 | .1.2.826.42.1.1578918.5.65.1.2.1.1.79 |
| bgpRmEntLocalIdentifier The BGP Identifier of the local system. This is a generic
identifier and not necessarily an IP address. This field
can only be changed when the Admin Status is down.
It is equiva… | column | BgpIdentifier | .1.2.826.42.1.1578918.5.65.1.2.1.1.8 |
| bgpRmEntRestartMultiplier This field is used to set multiplier for all configured
graceful restart time except bgpRmEntDynPeerRestartTime. | column | Unsigned32 | .1.2.826.42.1.1578918.5.65.1.2.1.1.80 |
| bgpRmEntEnableAlarms This field is used to enable alarms. | column | SNMPv2-TCTruthValue | .1.2.826.42.1.1578918.5.65.1.2.1.1.81 |
| bgpRmEntVrfName The text name of the VRF in which this entity instance is
running.
If this field is a zero-length string then it is assumed
that this entity instance is running in … | column | DC-MASTER-TCVrfName | .1.2.826.42.1.1578918.5.65.1.2.1.1.82 |
| bgpRmEntDynPeerLimit Limit on the total number of dynamic peers that can be
accepted.
A value of zero (0) means no limit.
This field can be changed while DC-BGP is active… | column | Unsigned32 | .1.2.826.42.1.1578918.5.65.1.2.1.1.83 |
| bgpRmEntTableVersion The table version number of the Loc-RIB. Initialized to 1
when BGP starts or restarts, and is incremented every time
the Loc-RIB is recalculated. | column | Unsigned32 | .1.2.826.42.1.1578918.5.65.1.2.1.1.84 |
| bgpRmEntHelperOnly If graceful restart is supported (bgpRmEntRestartSupported
is True), this field controls whether DC-BGP will act as a
helper node only - its effect is to force BGP restart
capabil… | column | SNMPv2-TCTruthValue | .1.2.826.42.1.1578918.5.65.1.2.1.1.85 |
| bgpRmEntInterClientReflEnabled Whether DC-BGP supports acting as a route reflector
between route reflector clients.
Routes will not be reflected between two peers that are
configured to be route … | column | SNMPv2-TCTruthValue | .1.2.826.42.1.1578918.5.65.1.2.1.1.86 |
| bgpRmEntConfigRtRefresh Set this field to 'true' to trigger a route refresh for
all peers. Peers that do not support route refresh will
have their sessions toggled.
Reading the value of t… | column | SNMPv2-TCTruthValue | .1.2.826.42.1.1578918.5.65.1.2.1.1.87 |
| bgpRmEntSupportIpv4 Indicates whether this instance supports connections to
BGP peers with IPv4 addresses, and understands IPv4 next
hop addresses.
This field can be changed at any tim… | column | SNMPv2-TCTruthValue | .1.2.826.42.1.1578918.5.65.1.2.1.1.88 |
| bgpRmEntUseHalProgramming Indicates whether DC-BGP is being used in a system
integrated with the HAL components.
When this field is set to true, DC-BGP will request
specific types of route f… | column | SNMPv2-TCTruthValue | .1.2.826.42.1.1578918.5.65.1.2.1.1.89 |
| bgpRmEntClusterId The configured Cluster-ID of the local router.
A value of 0.0.0.0 indicates the absence of this
value. This field can only be changed when the Admin
Status is down. The RM entit… | column | BgpIdentifier | .1.2.826.42.1.1578918.5.65.1.2.1.1.9 |
| bgpRmEntTenantId This field is used to set tenant id. | column | SNMPv2-SMIUnsigned32 | .1.2.826.42.1.1578918.5.65.1.2.1.1.90 |
| bgpRmEntStaleGr This field is used to change the behavior when route delete
comes, stale entry does not get deleted. | column | SNMPv2-TCTruthValue | .1.2.826.42.1.1578918.5.65.1.2.1.1.91 |
| bgpRmEntSlaCommunity This field is used to attach specified extended community to
all redistributed routes. | column | BgpExtendedCommunity | .1.2.826.42.1.1578918.5.65.1.2.1.1.92 |
| bgpRmEntSooAuto This field is used to attach auto-generated extended community
to all redistributed local host routes. | column | SNMPv2-TCTruthValue | .1.2.826.42.1.1578918.5.65.1.2.1.1.93 |
| bgpRmEntSiteId This field is used to specify site-id for this router in sdwan
case. Else set to 0. | column | Unsigned32 | .1.2.826.42.1.1578918.5.65.1.2.1.1.94 |
| bgpRmEntCliId This field is used to set bgp cli id. | column | SNMPv2-SMIUnsigned32 | .1.2.826.42.1.1578918.5.65.1.2.1.1.95 |
| bgpRmEntTenantName This value describes org name. | column | OctetString | .1.2.826.42.1.1578918.5.65.1.2.1.1.98 |
| bgpRmEntVPSiteInfoLocal This field is used to include local site information
(tenant-name(s), wan-ip(s), cpu-load, mem-load, site-identification)
in versa-private routes. | column | SNMPv2-TCTruthValue | .1.2.826.42.1.1578918.5.65.1.2.1.1.99 |