bgpFlapConfigEntry
DC-BGP-MIB ·
.1.2.826.42.1.1578918.5.65.1.5.9.1
Object
row
Each entry represents a set of configuration parameters used when damping a route. It is expected there will not be many entries in this table but no limit is put on this. Note that if a field is changed from using old parameters to new ones, the new parameters do not take effect those routes that were already damped using the old parameters. This will work itself out over time, and the operator has the option of undamping a damped route if they desire.
Context
- MIB
- DC-BGP-MIB
- OID
.1.2.826.42.1.1578918.5.65.1.5.9.1- Type
- row
- Status
- current
- Parent
- bgpFlapConfigTable
- Table
- bgpFlapConfigTable
- Children
- 9
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| bgpFlapConfigTmaxng The decay memory limit. The maximum time any memory of a
previous instability is retained given the route state is
unchanged and unreachable. This is generally used to
determine… | column | seconds SNMPv2-SMIInteger32 | .1.2.826.42.1.1578918.5.65.1.5.9.1.10 |
| bgpFlapConfigIndex The index of this route flap configuration table entry.
This is the index used to reference this route flap
configuration from the BGP RIB Manager entity configuration
or route ma… | column | SNMPv2-SMIUnsigned32 | .1.2.826.42.1.1578918.5.65.1.5.9.1.2 |
| bgpFlapConfigRowStatus Used to create and delete a flap config set. | column | SNMPv2-TCRowStatus | .1.2.826.42.1.1578918.5.65.1.5.9.1.3 |
| bgpFlapConfigCut The cutoff threshold expressed as a number of route
withdrawals. Above this level, the route will be suppressed.
This value must be greater than or equal to
bgpFlapConfigReuse. … | column | SNMPv2-SMIInteger32 | .1.2.826.42.1.1578918.5.65.1.5.9.1.4 |
| bgpFlapConfigReuse The reuse threshold expressed as a number of route
withdrawals. Below this level the route will be reused. The
scale used is 100 times that used in RFC2439 so the suggested
valu… | column | SNMPv2-SMIInteger32 | .1.2.826.42.1.1578918.5.65.1.5.9.1.5 |
| bgpFlapConfigThold The maximum time a route can be suppressed for (held). This
value must be less than or equal to bgpRmEntFlapReusemax in
the bgpRmEntTable. | column | seconds SNMPv2-SMIInteger32 | .1.2.826.42.1.1578918.5.65.1.5.9.1.6 |
| bgpFlapConfigDecayok The decay half life of the stability figure while the route is
still reachable (whether suppressed or not). This value must
be less than bgpFlapConfigTmaxok. | column | seconds SNMPv2-SMIInteger32 | .1.2.826.42.1.1578918.5.65.1.5.9.1.7 |
| bgpFlapConfigDecayng The decay half life of the stability figure while the route is
not reachable (whether suppressed or not). If it is not
defined or set to zero, no decay occurs if the route is
unr… | column | seconds SNMPv2-SMIInteger32 | .1.2.826.42.1.1578918.5.65.1.5.9.1.8 |
| bgpFlapConfigTmaxok The decay memory limit. The maximum time any memory of a
previous instability is retained given the route state is
unchanged and reachable. This is generally used to
determine a… | column | seconds SNMPv2-SMIInteger32 | .1.2.826.42.1.1578918.5.65.1.5.9.1.9 |
Indexes
| Object | Type | Syntax | OID |
|---|---|---|---|
| bgpRmEntIndex Identifies a RIB Manager entity. | column | SNMPv2-SMIUnsigned32 | .1.2.826.42.1.1578918.5.65.1.2.1.1.1 |
| bgpFlapConfigIndex The index of this route flap configuration table entry.
This is the index used to reference this route flap
configuration from the BGP RIB Manager entity configuration
or route ma… | column | SNMPv2-SMIUnsigned32 | .1.2.826.42.1.1578918.5.65.1.5.9.1.2 |