dpStatusRaidVolumeStatus2ResyncPercentage

DATAPOWER-STATUS-MIB · .1.3.6.1.4.1.14685.3.1.249.1.9
MIB view Table view

Object

column % SNMPv2-SMIUnsigned32 
The percentage of the total blocks that are not the same on the primary
and secondary drives. The value is rounded to the nearest percent, except
that the result will never be 100% unless resynchronization is absolutely
complete.

Context

MIB
DATAPOWER-STATUS-MIB
OID
.1.3.6.1.4.1.14685.3.1.249.1.9
Type
column
Access
readonly
Status
current
Units
%
Parent
dpStatusRaidVolumeStatus2Entry
Table
dpStatusRaidVolumeStatus2Table
Siblings
11

Syntax

% SNMPv2-SMIUnsigned32
Source
SNMPv2-SMIUnsigned32
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
dpStatusRaidVolumeStatus2VolumeNumber
The number of the RAID volume in the system. Numbering starting with 0.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.14685.3.1.249.1.1
dpStatusRaidVolumeStatus2InactiveStatus
If the RAID volume is active, the status will be 'active'. If the volume is inactive, it gives the reason why it is inactive.
columnEnumeration.1.3.6.1.4.1.14685.3.1.249.1.10
dpStatusRaidVolumeStatus2BadBlockTableFull
Whether the bad block table on the RAID volume is full.
columnEnumeration.1.3.6.1.4.1.14685.3.1.249.1.11
dpStatusRaidVolumeStatus2WriteCachingEnable
Whether write caching on the RAID volume is enabled.
columnEnumeration.1.3.6.1.4.1.14685.3.1.249.1.12
dpStatusRaidVolumeStatus2Type
The type of RAID volume. The incorporation of a particular type does not mean that the software supports creating or using this type of volume.
columnEnumeration.1.3.6.1.4.1.14685.3.1.249.1.2
dpStatusRaidVolumeStatus2VolumeID
The volume identifier that the RAID controller assigned to the volume.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.14685.3.1.249.1.3
dpStatusRaidVolumeStatus2NumPhysDisks
The number of physical disks that are configured to be part of the RAID volume.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.14685.3.1.249.1.4
dpStatusRaidVolumeStatus2State
The overall state of the RAID volume.
columnEnumeration.1.3.6.1.4.1.14685.3.1.249.1.5
dpStatusRaidVolumeStatus2Enabled
Whether the RAID volume is enabled. If not enabled, there is no file system access to the volume.
columnEnumeration.1.3.6.1.4.1.14685.3.1.249.1.6
dpStatusRaidVolumeStatus2Quiesced
Whether the RAID volume is quiesced. When quiesced, the volume is enabled but no commands (read, write) can be sent to it.
columnEnumeration.1.3.6.1.4.1.14685.3.1.249.1.7
dpStatusRaidVolumeStatus2ResyncInProgress
Whether resynchronization of the RAID volume is in progress. Resynchronization occurs when the data on the secondary drive is not the same that on the primary drive. Resynchroniza…
columnEnumeration.1.3.6.1.4.1.14685.3.1.249.1.8