dpStatusRaidPhysicalDriveStatusState
DATAPOWER-STATUS-MIB ·
.1.3.6.1.4.1.14685.3.1.260.1.7
Object
column
Enumeration
The current state of the physical drive.
Context
- MIB
- DATAPOWER-STATUS-MIB
- OID
.1.3.6.1.4.1.14685.3.1.260.1.7- Type
- column
- Access
- readonly
- Status
- current
- Parent
- dpStatusRaidPhysicalDriveStatusEntry
- Table
- dpStatusRaidPhysicalDriveStatusTable
- Siblings
- 18
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| dpStatusRaidPhysicalDriveStatusControllerID The RAID controller ID. Numbering starts with 1. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.14685.3.1.260.1.1 |
| dpStatusRaidPhysicalDriveStatusCoercedSize The normalized size in megabytes. The value is rounded down to an even
multiple, which allows you to swap drives of the same nominal size but
might not be the same raw size. | column | MB SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.14685.3.1.260.1.10 |
| dpStatusRaidPhysicalDriveStatusInterfaceType The interface type of the drive. | column | Enumeration | .1.3.6.1.4.1.14685.3.1.260.1.11 |
| dpStatusRaidPhysicalDriveStatusInterfaceSpeed The SAS interface speed negotiated between the RAID controller and the
physical drive. | column | Enumeration | .1.3.6.1.4.1.14685.3.1.260.1.12 |
| dpStatusRaidPhysicalDriveStatusSASaddress The SAS address of a physical drive. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.14685.3.1.260.1.13 |
| dpStatusRaidPhysicalDriveStatusVendorID The vendor identification string for the hard disk drive. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.14685.3.1.260.1.14 |
| dpStatusRaidPhysicalDriveStatusProductID The product identification string for the hard disk drive. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.14685.3.1.260.1.15 |
| dpStatusRaidPhysicalDriveStatusRevision The revision string of the hard disk drive from the vendor. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.14685.3.1.260.1.16 |
| dpStatusRaidPhysicalDriveStatusSpecificInfo The vendor specific information string that is read from the hard drive.
Generally, the identifier is unique for each physical drive. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.14685.3.1.260.1.17 |
| dpStatusRaidPhysicalDriveStatusFailure If the hard disk failure state shows Yes, replace this drive as soon as
possible to avoid possible data loss. | column | Enumeration | .1.3.6.1.4.1.14685.3.1.260.1.18 |
| dpStatusRaidPhysicalDriveStatusTemperature The temperature of the hard disk drive. | column | Degree C/Degree F SNMPv2-TCDisplayString | .1.3.6.1.4.1.14685.3.1.260.1.19 |
| dpStatusRaidPhysicalDriveStatusDeviceID The device identifier of the physical drive. Numbering starts with 1. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.14685.3.1.260.1.2 |
| dpStatusRaidPhysicalDriveStatusArrayID The RAID array identifier to which this physical drive joins. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.14685.3.1.260.1.3 |
| dpStatusRaidPhysicalDriveStatusLogicalDriveID The logical drive identifier of which this physical drive is a part. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.14685.3.1.260.1.4 |
| dpStatusRaidPhysicalDriveStatusLogicalDriveName The name of the logical drive. The value is always 'raid0'. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.14685.3.1.260.1.5 |
| dpStatusRaidPhysicalDriveStatusPosition The location of the physical drive from the front panel point-of-view of
the appliance. | column | Enumeration | .1.3.6.1.4.1.14685.3.1.260.1.6 |
| dpStatusRaidPhysicalDriveStatusProgressPercent The current progress percentage of the operation on the physical drive.
Operations can be rebuild, copyback, patrol, or clear. | column | % SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.14685.3.1.260.1.8 |
| dpStatusRaidPhysicalDriveStatusRawSize The exact size of the drive in megabytes. | column | MB SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.14685.3.1.260.1.9 |