dsVdslLineCfgProfRowStatus
DASAN-DSL-MIB ·
.1.3.6.1.4.1.6296.9.3.2.6.1.1.1.100
Object
This object is used to create a new row or modify or
delete an existing row in this table.
A profile activated by setting this object to 'active'.
When 'active' is set, the system will validate the profile.
Before a profile can be deleted or taken out of service,
(by setting this object to 'destroy' or 'outOfService')
it must be first unreferenced from all associated lines.
Context
- MIB
- DASAN-DSL-MIB
- OID
.1.3.6.1.4.1.6296.9.3.2.6.1.1.1.100- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- dsVdslLineCfgProfileEntry
- Table
- dsVdslLineCfgProfileTable
- Siblings
- 26
Values & Constraints
Type Values
1 | active |
2 | notInService |
3 | notReady |
4 | createAndGo |
5 | createAndWait |
6 | destroy |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| dsVdslLineCfgProfileName This object identifies a row in this table.
A default profile with an index of 'DEFVAL', will
always exist and its parameters will be set to vendor
specific val… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.6296.9.3.2.6.1.1.1.1 |
| dsVdslLineCfgDownMaxDataRate Specifies the maximum downstream slow channel
data rate in steps of 1000 bits/second.
The maximum aggregate downstream transmit speed
of the line can be derived fro… | column | kbps SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6296.9.3.2.6.1.1.1.10 |
| dsVdslLineCfgDownMinDataRate Specifies the minimum downstream slow channel
data rate in steps of 1000 bits/second.
The minimum aggregate downstream transmit speed
of the line can be derived fro… | column | kbps SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6296.9.3.2.6.1.1.1.11 |
| dsVdslLineCfgUpMaxDataRate Specifies the maximum upstream slow channel
data rate in steps of 1000 bits/second. | column | kbps SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6296.9.3.2.6.1.1.1.12 |
| dsVdslLineCfgUpMinDataRate Specifies the minimum upstream slow channel
data rate in steps of 1000 bits/second. | column | kbps SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6296.9.3.2.6.1.1.1.13 |
| dsVdslLineCfgDownMaxInterDelay Specifies the maximum interleave delay for the
downstream slow channel. | column | milliseconds Integer32 | .1.3.6.1.4.1.6296.9.3.2.6.1.1.1.16 |
| dsVdslLineCfgUpMaxInterDelay Specifies the maximum interleave delay for the
upstream slow channel. | column | milliseconds Integer32 | .1.3.6.1.4.1.6296.9.3.2.6.1.1.1.17 |
| dsVdslLineCfgHamband dsVdsl Amature Radio(HAM) band ID.
The value of Ham band is combination of the following value.
If you want to set band1 and band10, you should set value 257(band1 + band10)
to th… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.6296.9.3.2.6.1.1.1.20 |
| dsVdslLineCfgDownINP Vdsl downstream INP . | column | unit of 125usec Integer32 | .1.3.6.1.4.1.6296.9.3.2.6.1.1.1.21 |
| dsVdslLineCfgUpINP Vdsl upstream INP. | column | unit of 125usec Integer32 | .1.3.6.1.4.1.6296.9.3.2.6.1.1.1.22 |
| dsVdslLineCfgPBOLength dsVdsl Power Back-Off Length.
100m(1)
200m(2)
300m(3)
400m(4)
500m(5)
600m(6)
700m(7)
800m(8)
900m(9)
1000m(10) | column | Enumeration | .1.3.6.1.4.1.6296.9.3.2.6.1.1.1.23 |
| dsVdslLineCfgPSDMaskLevel dsVdsl PSD Mask Level.
notavailable(-1)
old gains(0)
ANSI M1(1)
ANSI M2(2)
ETSI M1(3)
ETSI M2(4)
ANNEX F 8.5(5)
ANSI M1 EX(6)
ANSI M2 EX(7)
ETSI M1 EX(8)
ETSI M2 EX(9)
ANNEX F 1… | column | Enumeration | .1.3.6.1.4.1.6296.9.3.2.6.1.1.1.24 |
| dsVdslLineCfgTCMAdmin . | column | Enumeration | .1.3.6.1.4.1.6296.9.3.2.6.1.1.1.25 |
| dsVdslLineCfgUpboEnable . | column | Enumeration | .1.3.6.1.4.1.6296.9.3.2.6.1.1.1.26 |
| dsVdslLineCfgChannel . | column | Enumeration | .1.3.6.1.4.1.6296.9.3.2.6.1.1.1.27 |
| dsVdslLineCfgStandard VDSL Standard. | column | Enumeration | .1.3.6.1.4.1.6296.9.3.2.6.1.1.1.28 |
| dsVdslLineCfgLineProfile sym25(1),
asym50-3b(2),
asym50-4b(3),
asym70(4),
asym100(5),
sym100(6),
8a(8),
8b(9),
8c(10),
8d(11),
12a(12),
12b(13),
17a(14),
30a(15),
12a997(16),
12b997(17),
v17a_8k(18) | column | Enumeration | .1.3.6.1.4.1.6296.9.3.2.6.1.1.1.29 |
| dsVdslLineCfgToneDisableMode normal(1),
isdn(2),
adsl(3),
adsl2(4),
t-lan(5),
adsl-safe(6) | column | Enumeration | .1.3.6.1.4.1.6296.9.3.2.6.1.1.1.30 |
| dsVdslLineCfgOptionband dsVdsl Optional band ID.
Annex B 6-64 (1)
Annex A 6-32 (2)
Annex B 32-64 (3)
Exclude Option Band (4)
Annex M | column | Enumeration | .1.3.6.1.4.1.6296.9.3.2.6.1.1.1.31 |
| dsVdslLineCfgProfileAction real set to profile parameter at the time.
profile parameter is followings.
dsVdslLineCfgStandard,
dsVdslLineCfgLineProfile,
dsVdslLineCfgToneDisableMode,
dsVdslLineCfgOptionban… | column | Enumeration | .1.3.6.1.4.1.6296.9.3.2.6.1.1.1.33 |
| dsVdslLineCfgDownMaxSnrMgn Specifies the maximum downstream Signal/Noise Margin
in units of 0.25 dB, for a range of 0 to 31.75 dB. | column | 0.25dBm Unsigned32 | .1.3.6.1.4.1.6296.9.3.2.6.1.1.1.4 |
| dsVdslLineCfgDownMinSnrMgn Specifies the minimum downstream Signal/Noise Margin
in units of 0.25 dB, for a range of 0 to 31.75 dB. | column | 0.25dBm Unsigned32 | .1.3.6.1.4.1.6296.9.3.2.6.1.1.1.5 |
| dsVdslLineCfgDownTargetSnrMgn Specifies the target downstream Signal/Noise Margin
in units of 0.25 dB, for a range of 0 to 31.75 dB.
This is the Noise Margin the transceivers must achieve
with a BER of 10^-7 … | column | 0.25dBm Unsigned32 | .1.3.6.1.4.1.6296.9.3.2.6.1.1.1.6 |
| dsVdslLineCfgUpMaxSnrMgn Specifies the maximum upstream Signal/Noise Margin
in units of 0.25 dB, for a range of 0 to 31.75 dB. | column | 0.25dBm Unsigned32 | .1.3.6.1.4.1.6296.9.3.2.6.1.1.1.7 |
| dsVdslLineCfgUpMinSnrMgn Specifies the minimum upstream Signal/Noise Margin
in units of 0.25 dB, for a range of 0 to 31.75 dB. | column | 0.25dBm Unsigned32 | .1.3.6.1.4.1.6296.9.3.2.6.1.1.1.8 |
| dsVdslLineCfgUpTargetSnrMgn Specifies the target upstream Signal/Noise Margin in
units of 0.25 dB, for a range of 0 to 31.75 dB. This
is the Noise Margin the transceivers must achieve with
a BER of 10^-7… | column | 0.25dBm Unsigned32 | .1.3.6.1.4.1.6296.9.3.2.6.1.1.1.9 |