overrideDigi3f2
DANTHERM-COOLING-MIB ·
.1.3.6.1.4.1.46651.1.4.25
Object
scalar
mandatory
r/w
Integer32
0-100 - Fan Speed in Duty cycle. 120 - No action on Over ride.
Context
- MIB
- DANTHERM-COOLING-MIB
- OID
.1.3.6.1.4.1.46651.1.4.25- Type
- scalar
- Access
- readwrite
- Status
- mandatory
- Parent
- fan2Config
- Siblings
- 29
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-120
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| saveReloadConff2 mandatory 0 - Discard modifications, 1 - Save Modifications. Configuration reloaded | scalar | Integer32 | .1.3.6.1.4.1.46651.1.4.1 |
| extendHighSpeedExitTemprf2 mandatory Extended high Speed exit temperature | scalar | Integer32 | .1.3.6.1.4.1.46651.1.4.10 |
| boostEntryTemprf2 mandatory Boost Speed entry temperature | scalar | Integer32 | .1.3.6.1.4.1.46651.1.4.11 |
| boostExitTemprf2 mandatory Boost Speed entry temperature | scalar | Integer32 | .1.3.6.1.4.1.46651.1.4.12 |
| idleRPMf2 mandatory Idle speed RPM | scalar | Integer32 | .1.3.6.1.4.1.46651.1.4.13 |
| midPointRPMf2 mandatory Midpoint Speed RPM | scalar | Integer32 | .1.3.6.1.4.1.46651.1.4.14 |
| highSpeedRPMf2 mandatory high Speed RPM | scalar | Integer32 | .1.3.6.1.4.1.46651.1.4.15 |
| extendHighSpeedRPMf2 mandatory Extended high Speed RPM | scalar | Integer32 | .1.3.6.1.4.1.46651.1.4.16 |
| idleDutyCyclef2 mandatory Idle Speed Duty Cycle | scalar | Integer32 | .1.3.6.1.4.1.46651.1.4.17 |
| midDutyCyclef2 mandatory Midpoint speed Duty Cycle | scalar | Integer32 | .1.3.6.1.4.1.46651.1.4.18 |
| highSpeedDutyCyclef2 mandatory high speed Duty Cycle | scalar | Integer32 | .1.3.6.1.4.1.46651.1.4.19 |
| offTemprf2 mandatory Fan OFF temperature | scalar | Integer32 | .1.3.6.1.4.1.46651.1.4.2 |
| extendHighSpeedDutyCyclef2 mandatory Extended high speed Duty Cycle | scalar | Integer32 | .1.3.6.1.4.1.46651.1.4.20 |
| boostDutyCyclef2 mandatory Boost speed Duty Cycle | scalar | Integer32 | .1.3.6.1.4.1.46651.1.4.21 |
| deadBandRPMf2 mandatory Dead band RPM | scalar | Integer32 | .1.3.6.1.4.1.46651.1.4.22 |
| overrideDigi1f2 mandatory 0-100 - Fan Speed in Duty cycle. 120 - No action on Over ride. | scalar | Integer32 | .1.3.6.1.4.1.46651.1.4.23 |
| overrideDigi2f2 mandatory 0-100 - Fan Speed in Duty cycle. 120 - No action on Over ride. | scalar | Integer32 | .1.3.6.1.4.1.46651.1.4.24 |
| overrideSensorfailf2 mandatory 0-100 - Fan Speed in Duty cycle. 120 - No action on Over ride. | scalar | Integer32 | .1.3.6.1.4.1.46651.1.4.26 |
| tachoPulseperrotationf2 mandatory Number of Tacho pulses per cycle rotation for given fan | scalar | Integer32 | .1.3.6.1.4.1.46651.1.4.28 |
| closedLoopenablef2 mandatory Closed Loop control enable or disable for given Fan. 0 - Enable. 1 - Disable | scalar | Integer32 | .1.3.6.1.4.1.46651.1.4.29 |
| idleOnTemprf2 mandatory Fan Idle Speed On temperature | scalar | Integer32 | .1.3.6.1.4.1.46651.1.4.3 |
| controlTypef2 mandatory 0 - 0-10V DC control. 1 - PWM control | scalar | Integer32 | .1.3.6.1.4.1.46651.1.4.30 |
| enablef2 mandatory 0 - Disable Fan control. 1 - Enabel fan control | scalar | Integer32 | .1.3.6.1.4.1.46651.1.4.31 |
| idleEntryTemprf2 mandatory Idle entry temperature | scalar | Integer32 | .1.3.6.1.4.1.46651.1.4.4 |
| midPoint1Temprf2 mandatory Mid point 1 entry temperature | scalar | Integer32 | .1.3.6.1.4.1.46651.1.4.5 |
| setPointTemprf2 mandatory Set Point temperature | scalar | Integer32 | .1.3.6.1.4.1.46651.1.4.6 |
| midPoint2Temprf2 mandatory Mid point 2 entry temperature | scalar | Integer32 | .1.3.6.1.4.1.46651.1.4.7 |
| highSpeedTemprf2 mandatory high Speed entry temperature | scalar | Integer32 | .1.3.6.1.4.1.46651.1.4.8 |
| extendHighSpeedEntryTemprf2 mandatory Extended high Speed entry temperature | scalar | Integer32 | .1.3.6.1.4.1.46651.1.4.9 |