extendHighSpeedRPMf1
DANTHERM-COOLING-MIB ·
.1.3.6.1.4.1.46651.1.3.16
Object
scalar
mandatory
r/w
RPM Integer32
Extended high Speed RPM
Context
- MIB
- DANTHERM-COOLING-MIB
- OID
.1.3.6.1.4.1.46651.1.3.16- Type
- scalar
- Access
- readwrite
- Status
- mandatory
- Units
- RPM
- Parent
- fan1Config
- Siblings
- 25
Syntax
RPM Integer32
Values & Constraints
Object Constraints
range: 0-9999
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| extendHighSpeedExitTemprf1 mandatory Extended high Speed exit temperature | scalar | celsius Integer32 | .1.3.6.1.4.1.46651.1.3.10 |
| boostEntryTemprf1 mandatory Boost Speed entry temperature | scalar | celsius Integer32 | .1.3.6.1.4.1.46651.1.3.11 |
| boostExitTemprf1 mandatory Boost Speed entry temperature | scalar | celsius Integer32 | .1.3.6.1.4.1.46651.1.3.12 |
| idleRPMf1 mandatory Idle speed RPM | scalar | RPM Integer32 | .1.3.6.1.4.1.46651.1.3.13 |
| midPointRPMf1 mandatory Midpoint Speed RPM | scalar | RPM Integer32 | .1.3.6.1.4.1.46651.1.3.14 |
| highSpeedRPMf1 mandatory high Speed RPM | scalar | RPM Integer32 | .1.3.6.1.4.1.46651.1.3.15 |
| idleDutyCyclef1 mandatory Idle Speed Duty Cycle | scalar | percent Integer32 | .1.3.6.1.4.1.46651.1.3.17 |
| midDutyCyclef1 mandatory Midpoint speed Duty Cycle | scalar | percent Integer32 | .1.3.6.1.4.1.46651.1.3.18 |
| highSpeedDutyCyclef1 mandatory high speed Duty Cycle | scalar | percent Integer32 | .1.3.6.1.4.1.46651.1.3.19 |
| offTemprf1 mandatory Fan OFF temperature | scalar | celsius Integer32 | .1.3.6.1.4.1.46651.1.3.2 |
| extendHighSpeedDutyCyclef1 mandatory Extended high speed Duty Cycle | scalar | percent Integer32 | .1.3.6.1.4.1.46651.1.3.20 |
| boostDutyCyclef1 mandatory Boost speed Duty Cycle | scalar | percent Integer32 | .1.3.6.1.4.1.46651.1.3.21 |
| deadBandRPMf1 mandatory Dead band RPM | scalar | RPM Integer32 | .1.3.6.1.4.1.46651.1.3.22 |
| overrideDigi1f1 mandatory 0-100 - Fan Speed in Duty cycle. 120 - No action on Over ride. | scalar | Integer32 | .1.3.6.1.4.1.46651.1.3.23 |
| overrideDigi2f1 mandatory 0-100 - Fan Speed in Duty cycle. 120 - No action on Over ride. | scalar | percent Integer32 | .1.3.6.1.4.1.46651.1.3.24 |
| overrideDigi3f1 mandatory 0-100 - Fan Speed in Duty cycle. 120 - No action on Over ride. | scalar | percent Integer32 | .1.3.6.1.4.1.46651.1.3.25 |
| overrideSensorfailf1 mandatory 0-100 - Fan Speed in Duty cycle. 120 - No action on Over ride. | scalar | percent Integer32 | .1.3.6.1.4.1.46651.1.3.26 |
| tachoPulseperrotationf1 mandatory Number of Tacho pulses per cycle rotation for given fan | scalar | Integer32 | .1.3.6.1.4.1.46651.1.3.28 |
| idleOnTemprf1 mandatory Fan Idle Speed On temperature | scalar | celsius Integer32 | .1.3.6.1.4.1.46651.1.3.3 |
| idleEntryTemprf1 mandatory Idle entry temperature | scalar | celsius Integer32 | .1.3.6.1.4.1.46651.1.3.4 |
| midPoint1Temprf1 mandatory Mid point 1 entry temperature | scalar | celsius Integer32 | .1.3.6.1.4.1.46651.1.3.5 |
| setPointTemprf1 mandatory Set Point temperature | scalar | celsius Integer32 | .1.3.6.1.4.1.46651.1.3.6 |
| midPoint2Temprf1 mandatory Mid point 2 entry temperature | scalar | celsius Integer32 | .1.3.6.1.4.1.46651.1.3.7 |
| highSpeedTemprf1 mandatory high Speed entry temperature | scalar | celsius Integer32 | .1.3.6.1.4.1.46651.1.3.8 |
| extendHighSpeedEntryTemprf1 mandatory Extended high Speed entry temperature | scalar | celsius Integer32 | .1.3.6.1.4.1.46651.1.3.9 |