wtSeriUdpDispString1
Com-Server-Intern-MIB ·
.1.3.6.1.4.1.5040.1.1.1.3.6.1.3
Object
column
mandatory
r/w
OctetString
These parameters allow compact sending of serial data to the network; the serial data stream is not broken up randomly, but rather serial packets can be sent in their original context even over the network as one packet. Enter in wtSeriUdpDispString1 and/or wtSeriUdpDispString2 two characters each that you want the serial data stream searched for. Only if one of the two strings is found are the data from the serial port packed into network packets. If you only want to look for one character, set wtSeriUdpDispString2 to 0. If for example you configure wtSeriTcpDispString1 to 3100h and wtSeriUdpDispString2 to 0, only character 1 is searched for. Both Dispatch Strings = 0 deactivates the mode. IMPORTANT: These characters are sent to the UDP server!
Context
- MIB
- Com-Server-Intern-MIB
- OID
.1.3.6.1.4.1.5040.1.1.1.3.6.1.3- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- wtSeriUdpClientEntry
- Table
- wtSeriUdpClientTable
- Siblings
- 9
Syntax
OctetString
Values & Constraints
Object Constraints
range: 2-2
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wtSeriUdpServerPort mandatory Port number which the application (UDP server process) addresses on the computer. | column | Integer32 | .1.3.6.1.4.1.5040.1.1.1.3.6.1.1 |
| wtSeriUdpServerUrl mandatory URL of the computer on which your application (UDP process) is active. The URL
can be used instead of an IP address and only in conjunction with a valid DNS server.
The URL contai… | column | OctetString | .1.3.6.1.4.1.5040.1.1.1.3.6.1.10 |
| wtSeriUdpServerIp mandatory IP address of the computer on which the application (UDP server process) is active. | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.5040.1.1.1.3.6.1.2 |
| wtSeriUdpDispString2 mandatory See DESCRIPTION of wtSeriUdpDispString1. | column | OctetString | .1.3.6.1.4.1.5040.1.1.1.3.6.1.4 |
| wtSeriUdpSeriProtocol mandatory The protocol mode which can be activated here has been replaced by
the 'Serial Socket Interface' (Mode: Multiport Protocol). For reasons of downward
compatibility the functions a… | column | Enumeration | .1.3.6.1.4.1.5040.1.1.1.3.6.1.5 |
| wtSeriUdpSeriCoding mandatory See DESCRIPTION of wtSeriUdpSeriProtocol. | column | Enumeration | .1.3.6.1.4.1.5040.1.1.1.3.6.1.6 |
| wtSeriUdpCAddress mandatory Activating this option activates UDP client mode for changing UDP
servers. The address of the UDP server does not have to be permanently
configured, but rather is sent on the se… | column | Enumeration | .1.3.6.1.4.1.5040.1.1.1.3.6.1.7 |
| wtSeriUdpWrCAddress mandatory Set this switch to active (2) to output the address of the sender in ASCII format
before sending the data of a UDP datagram to the serial port. The string always
contains 22 cha… | column | Enumeration | .1.3.6.1.4.1.5040.1.1.1.3.6.1.8 |
| wtSeriUdpDisconnectChar mandatory This parameter is only evaluated if the variable wtSeriUdpCAddress is
activated. If the Com-Server port on the serial interface receives the
character configured here, it deletes … | column | OctetString | .1.3.6.1.4.1.5040.1.1.1.3.6.1.9 |