wtSeriTcpDispString1
Com-Server-Intern-MIB ·
.1.3.6.1.4.1.5040.1.1.1.3.5.1.6
Object
column
mandatory
r/w
OctetString
These parameters allow compact sending of serial data to the network; the serial data stream is not broken up randomly, but rather serial packets can be sent in their original context even over the network as one packet. Enter in wtSeriTcpDispString1 and/or wtSeriTcpDispString2 two characters each that you want the serial data stream searched for. Only if one of the two strings is found are the data from the serial port packed into network packets. If you only want to look for one character, set wtSeriTcpDispString2 to 0. If for example you configure wtSeriTcpDispString1 to 3100h and wtSeriTcpDispString2 to 0, only character 1 is searched for. Both Dispatch Strings = 0 deactivates the mode. IMPORTANT: These characters are sent to the TCP server!
Context
- MIB
- Com-Server-Intern-MIB
- OID
.1.3.6.1.4.1.5040.1.1.1.3.5.1.6- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- wtSeriTcpClientEntry
- Table
- wtSeriTcpClientTable
- Siblings
- 9
Syntax
OctetString
Values & Constraints
Object Constraints
range: 2-2
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wtSeriTcpServerPort mandatory Port number which the application (TCP server process) addresses on the computer. | column | Integer32 | .1.3.6.1.4.1.5040.1.1.1.3.5.1.1 |
| wtSeriTcpResponseMode mandatory In Response Mode the application, special characters are output which
are used to inform the application in the serial terminal device about
the network-side connection status o… | column | Enumeration | .1.3.6.1.4.1.5040.1.1.1.3.5.1.10 |
| wtSeriTcpServerUrl mandatory URL of the computer on which your application (TCP server process) is active. The URL
can be used instead of an IP address and only in conjunction with a valid DNS server.
The URL… | column | OctetString | .1.3.6.1.4.1.5040.1.1.1.3.5.1.11 |
| wtSeriTcpServerIp mandatory IP address of the computer on which the application (TCP server process) is active. | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.5040.1.1.1.3.5.1.2 |
| wtSeriTcpInactTimeout mandatory Connection timeout in seconds. If no data are exchanged within the
specified time, the Com-Server closes the connection to the server. The
value 0 deactivates the timer. | column | Integer32 | .1.3.6.1.4.1.5040.1.1.1.3.5.1.3 |
| wtSeriTcpConnectTimeout mandatory Connection timeout in seconds. This value is only effective in
conjunction with an activated Inactivity Timeout. After the Inactivity
Timeout has expired, the Com-Server attempts … | column | Integer32 | .1.3.6.1.4.1.5040.1.1.1.3.5.1.4 |
| wtSeriTcpDisconnectChar mandatory If the Com-Server receives the character set here on the serial port, the
connection to the TCP server is closed. The character itself is not sent to the
TCP server. The value 0 d… | column | OctetString | .1.3.6.1.4.1.5040.1.1.1.3.5.1.5 |
| wtSeriTcpDispString2 mandatory See DESCRIPTION of wtSeriTcpDispString1. | column | OctetString | .1.3.6.1.4.1.5040.1.1.1.3.5.1.7 |
| wtSeriTcpCAddress mandatory Activating this switch activates TCP client mode for changing TCP
servers. The address of the TCP server does not have to be permanently
configured, but rather is sent on the ser… | column | Enumeration | .1.3.6.1.4.1.5040.1.1.1.3.5.1.8 |