deviceOccupiedSlots

Cabletron-MIB · .1.3.6.1.4.1.52.1.2.1.1.4

Object

scalar Integer32

The slots that contain MIM boards.
          
This field  is bit  encoded (eg.  If a  bit is set then
that board  is present.  For example, a value of 3 indicates
that there  are boards  in the  IRM slot  and the  first MIM
slot.

Context

MIB: Cabletron-MIB
OID: .1.3.6.1.4.1.52.1.2.1.1.4
Type: scalar
Access: readonly
Status: current
Parent: device
Siblings: 26

Syntax

Integer32

Source: COPS-PR-SPPIInteger32
Base type: Integer32

Values & Constraints

Type Constraints

range: -2147483648..2147483647

Related Objects

Sibling Objects

Object	Type	Syntax	OID
deviceRecColls The number of receive collsions detected by this MMAC.	scalar	RFC1155-SMICounter	`.1.3.6.1.4.1.52.1.2.1.1.10`
deviceAlign The number of packets with alignement errors detected.	scalar	RFC1155-SMICounter	`.1.3.6.1.4.1.52.1.2.1.1.11`
deviceCRC The number of packets with bad CRC detected.	scalar	RFC1155-SMICounter	`.1.3.6.1.4.1.52.1.2.1.1.12`
deviceRunt The number of runt frames detected by this device.	scalar	RFC1155-SMICounter	`.1.3.6.1.4.1.52.1.2.1.1.13`
deviceOOWColl The number of out-of-window collisions detected by this	scalar	RFC1155-SMICounter	`.1.3.6.1.4.1.52.1.2.1.1.14`
deviceNoResources The number of No resource condtions detected.	scalar	RFC1155-SMICounter	`.1.3.6.1.4.1.52.1.2.1.1.15`
deviceRecBytes The number of bytes detected on the network.	scalar	RFC1155-SMICounter	`.1.3.6.1.4.1.52.1.2.1.1.16`
deviceGiantFrames The number of longer than 1518 bytes.	scalar	RFC1155-SMICounter	`.1.3.6.1.4.1.52.1.2.1.1.17`
deviceRestart If this object is set to 0 the device is restarted.	scalar	Integer32	`.1.3.6.1.4.1.52.1.2.1.1.18`
deviceResetCounter If this object is set to 0, all of the devices Counters are reset to 0.	scalar	RFC1155-SMICounter	`.1.3.6.1.4.1.52.1.2.1.1.19`
deviceMMACType Indicates the type of MMAC.	scalar	Enumeration	`.1.3.6.1.4.1.52.1.2.1.1.2`
deviceRedundantCts The number of redundant circuits available for use.	scalar	Integer32	`.1.3.6.1.4.1.52.1.2.1.1.20`
deviceTimeBase The number of seconds used as the interval for performing all of the rate alarm checks. The minimum is 10 secs.	scalar	Integer32	`.1.3.6.1.4.1.52.1.2.1.1.24`
deviceResetRedundancy Setting this object to a 1 will reset redundancy for the entire box.	scalar	Integer32	`.1.3.6.1.4.1.52.1.2.1.1.25`
deviceSrcAddrAgingTime The number of minutes that a source address is not detected before it is removed from the source address table.	scalar	Integer32	`.1.3.6.1.4.1.52.1.2.1.1.26`
deviceSrcAddrTraps Controls sending of source address related traps.	scalar	Enumeration	`.1.3.6.1.4.1.52.1.2.1.1.27`
deviceSrcAddrLocked If this is set to 2, any source addresses that are detected on station ports that are not in the table will cause the port to be turned off.	scalar	Enumeration	`.1.3.6.1.4.1.52.1.2.1.1.28`
deviceEnetBoardMap The slots that contain Ethernet MIM boards.	scalar	Integer32	`.1.3.6.1.4.1.52.1.2.1.1.29`
deviceSlots Number of available device slots in this device, including the IRM slot.	scalar	Enumeration	`.1.3.6.1.4.1.52.1.2.1.1.3`
deviceTokenRingBoardMap The slots that contain Token Ring MIM boards.	scalar	Integer32	`.1.3.6.1.4.1.52.1.2.1.1.30`
deviceFDDIBoardMap The slots that contain FDDI MIM boards.	scalar	Integer32	`.1.3.6.1.4.1.52.1.2.1.1.31`
devicePortsOn The number of operating ports on the device.	scalar	Integer32	`.1.3.6.1.4.1.52.1.2.1.1.5`
deviceTotalPorts The total number of repeater ports on the MMAC.	scalar	Integer32	`.1.3.6.1.4.1.52.1.2.1.1.6`
deviceTotalPkts The number of packets detected on all ports of this device.	scalar	RFC1155-SMICounter	`.1.3.6.1.4.1.52.1.2.1.1.7`
deviceTotalErrors The sum of all of the errors listed including alignment,CRC, runts, giants, and Out of window collisions.	scalar	RFC1155-SMICounter	`.1.3.6.1.4.1.52.1.2.1.1.8`
deviceTransmitColl The number of transmit collisions detected by this MMAC.	scalar	RFC1155-SMICounter	`.1.3.6.1.4.1.52.1.2.1.1.9`