bdgdeviceTrapType

Cabletron-MIB · .1.3.6.1.4.1.52.1.3.1.1.36
MIB view Table view

Object

scalar ObjectIdentifier 
Contains the object identifier of the first VarBinding in the
last trap generated by the bridge.

Context

MIB
Cabletron-MIB
OID
.1.3.6.1.4.1.52.1.3.1.1.36
Type
scalar
Access
readonly
Status
current
Parent
bdgdevice
Siblings
34

Syntax

ObjectIdentifier

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
bdgdeviceDisableBdg
Indicates if the bridge will be disabled.
scalarEnumeration.1.3.6.1.4.1.52.1.3.1.1.1
bdgdeviceRestartBdg
Force the bridge to undergo a software reset.
scalarEnumeration.1.3.6.1.4.1.52.1.3.1.1.10
bdgdeviceFrFwd
The number of frames forwarded by the bridge.
scalarRFC1155-SMICounter.1.3.6.1.4.1.52.1.3.1.1.11
bdgdeviceFrRx
The number of frames received by the bridge.
scalarRFC1155-SMICounter.1.3.6.1.4.1.52.1.3.1.1.12
bdgdeviceFrFlt
The number of frames filtered by the bridge.
scalarRFC1155-SMICounter.1.3.6.1.4.1.52.1.3.1.1.13
bdgdeviceErr
The total number of network errors that have occurred.
scalarRFC1155-SMICounter.1.3.6.1.4.1.52.1.3.1.1.14
bdgdeviceSwitchSetting
Indicates the current switch settings read from the bridge hardware.
scalarOctetString.1.3.6.1.4.1.52.1.3.1.1.15
bdgdeviceNumRestarts
The number of times the bridge has been powered up or restarted.
scalarRFC1155-SMICounter.1.3.6.1.4.1.52.1.3.1.1.16
bdgdeviceTypeFiltering
The type of filtering to be performed by the bridge. The default is IEEE 802.1.
scalarEnumeration.1.3.6.1.4.1.52.1.3.1.1.17
bdgdeviceSTAProtocol
The spanning tree algorithm under which the bridge is operating. The selections are as follows: - IEEE 802.1 compliant spanning tree algorithm environment (802.1) - DEC LAN B…
scalarEnumeration.1.3.6.1.4.1.52.1.3.1.1.18
bdgdeviceBridgeID
The unique identifier of the bridge. The first two bytes of the identifier are the bridge priority and the last six bytes are the Ethernet address.
scalarOctetString.1.3.6.1.4.1.52.1.3.1.1.19
bdgdeviceRestoreSettings
Restore the following settings to their default values: Bridge Name to ETHERNET_BRIDGE, Location to LOCAL, Port 1 Name to PORT_1, Port 2 Name to PORT_2, Port 1 Network Name to LAN…
scalarEnumeration.1.3.6.1.4.1.52.1.3.1.1.2
bdgdeviceTopChgCnt
The number of times the bridge's Topology Change Flag has been changed since the bridge was powered up or initialized.
scalarRFC1155-SMICounter.1.3.6.1.4.1.52.1.3.1.1.20
bdgdeviceRootCost
The cost of the path to the root from this bridge.
scalarInteger32.1.3.6.1.4.1.52.1.3.1.1.21
bdgdeviceRootPort
The port identifier for the port which offers the lowest cost path to the root, i.e. that port for which the sum of the values of the designated cost and path cost parameters held…
scalarInteger32.1.3.6.1.4.1.52.1.3.1.1.22
bdgdeviceHelloTime
The time interval between the transmission of Configuration BPDU's by a bridge which is attempting to become the root or is the root.
scalarInteger32.1.3.6.1.4.1.52.1.3.1.1.23
bdgdeviceBdgMaxAge
The value of the Max Age parameter when the bridge is the root or is attempting to become the root. A time of 6 to 40 seconds is allowed. The default is 20 seconds.
scalarInteger32.1.3.6.1.4.1.52.1.3.1.1.24
bdgdeviceBdgFwdDly
The value of the forward delay parameter when the bridge is the root or is attempting to become the root. A time of 4 to 30 seconds is allowed.
scalarInteger32.1.3.6.1.4.1.52.1.3.1.1.25
bdgdeviceTimeTopChg
The time in seconds that has elapsed since the bridge's Topology Change Flag last recorded the value of a topology change.
scalarInteger32.1.3.6.1.4.1.52.1.3.1.1.26
bdgdeviceTopChg
Indicates if a bridge topology change is in progress.
scalarEnumeration.1.3.6.1.4.1.52.1.3.1.1.27
bdgdeviceDesigRoot
The unique identifier of the bridge recorded as the root.
scalarOctetString.1.3.6.1.4.1.52.1.3.1.1.28
bdgdeviceMaxAge
The maximum age of received protocol information before it is discarded.
scalarInteger32.1.3.6.1.4.1.52.1.3.1.1.29
bdgdeviceHoldTime
The minimum time period elapsing between the transmission of configuration BPDU's through a given bridge port.
scalarInteger32.1.3.6.1.4.1.52.1.3.1.1.30
bdgdeviceFwdDly
The time spent in the listening state while moving from the blocking state to the learning state, or the time spent in the learning state while moving from the listening state to …
scalarInteger32.1.3.6.1.4.1.52.1.3.1.1.31
bdgdeviceBdgHello
The value of the Hello Time parameter when the bridge is the root or is attempting to become the root. A time of 1 to 10 seconds is allowed. The default is 2 seconds.
scalarInteger32.1.3.6.1.4.1.52.1.3.1.1.32
bdgdeviceBdgPriority
The part of the bridge address that contains the identifier used in the spanning tree for priority comparisons. Allowed range is 0 through FFFF. The default is 8000.
scalarInteger32.1.3.6.1.4.1.52.1.3.1.1.33
bdgdeviceResetCounts
Reset all counters to zero.
scalarEnumeration.1.3.6.1.4.1.52.1.3.1.1.34
bdgdeviceUptime
The time, in seconds, that has elapsed since the bridge was last reset or initialized.
scalarInteger32.1.3.6.1.4.1.52.1.3.1.1.35
bdgdeviceBdgName
The user-defined name (up to 32 characters long) of the bridge. The default bridge name is ETHERNET_BRIDGE.
scalarOctetString.1.3.6.1.4.1.52.1.3.1.1.4
bdgdeviceNumPorts
The number of ports present on the bridge.
scalarInteger32.1.3.6.1.4.1.52.1.3.1.1.5
bdgdeviceType
The type of bridge, NB25E, IRBM, or NB20E.
scalarOctetString.1.3.6.1.4.1.52.1.3.1.1.6
bdgdeviceVersion
The release version of the firmware installed in the bridge.
scalarOctetString.1.3.6.1.4.1.52.1.3.1.1.7
bdgdeviceLocation
The user-defined name to indicate the location of the bridge on the network. The default location name is LOCAL.
scalarOctetString.1.3.6.1.4.1.52.1.3.1.1.8
bdgdeviceStatus
The status of the bridge, ON-LINE, STAND BY or DISABLED.
scalarOctetString.1.3.6.1.4.1.52.1.3.1.1.9