bdgPortOversizePackets
Cabletron-MIB ·
.1.3.6.1.4.1.52.1.3.1.2.26
Object
scalar
RFC1155-SMICounter
The number of packets received at the indicated port that were greater than the IEEE 802.3 maximum Ethernet frame size of 1518 bytes.
Context
- MIB
- Cabletron-MIB
- OID
.1.3.6.1.4.1.52.1.3.1.2.26- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- bdgPort
- Siblings
- 26
Syntax
RFC1155-SMICounter
- Source
- RFC1155-SMICounter
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| bdgPortAddress The Ethernet address of the port. | scalar | OctetString | .1.3.6.1.4.1.52.1.3.1.2.1 |
| bdgPortDisTDE The number of frames that were intended for forwarding but were
discarded when the maximum time period set for transmission was
exceeded before forwarding was possible. | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.52.1.3.1.2.10 |
| bdgPortDisErr The number of frames that could not be transmitted because the
frame was too large for the attached network (1526 bytes,
including preamble, for 802.3 networks). | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.52.1.3.1.2.11 |
| bdgPortColl The number of collisions that have occurred on the network at
the specified port. | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.52.1.3.1.2.12 |
| bdgPortTxAbrt The number of transmissions that have been aborted due to
excessive collisions (over 16 attempts to transmit the same
packet). | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.52.1.3.1.2.13 |
| bdgPortOowColl The number of collisions out of the standard collision window
(51.2 uS). This indicates a network problem. | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.52.1.3.1.2.14 |
| bdgPortCRCErr The number of packets detected with Cyclical Redundancy Check
failures. | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.52.1.3.1.2.15 |
| bdgPortFrAlErr The number of errors due to misaligned packets. | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.52.1.3.1.2.16 |
| bdgPortPriority The part of the port identifier which is used with the spanning
tree algorithm when determining which port in a LAN segment has
priority. The default is 80. | scalar | Integer32 | .1.3.6.1.4.1.52.1.3.1.2.17 |
| bdgPortState The current state of the port, DISABLED, LISTENING, LEARNING,
FORWARDING or BLOCKING. | scalar | OctetString | .1.3.6.1.4.1.52.1.3.1.2.18 |
| bdgPortPathCost The contributory cost of the applicable port to the overall cost
of the path when the specified port is the root port. Allowable
range is 1 to 65535. The default is 100. | scalar | Integer32 | .1.3.6.1.4.1.52.1.3.1.2.19 |
| bdgPortName The user-defined name assigned to the port. The default port 1
name is PORT_1 and the default Port 2 name is PORT_2. | scalar | OctetString | .1.3.6.1.4.1.52.1.3.1.2.2 |
| bdgPortDesigCost The cost of the path of this port to the root bridge on the
network. | scalar | Integer32 | .1.3.6.1.4.1.52.1.3.1.2.20 |
| bdgPortDesigBrdg The network address of the bridge that is assumed to be the root
bridge on the network. | scalar | OctetString | .1.3.6.1.4.1.52.1.3.1.2.21 |
| bdgPortDesigPort The port identifier of the bridge port believed to be the
designated port for the LAN associated with the port. | scalar | Integer32 | .1.3.6.1.4.1.52.1.3.1.2.22 |
| bdgPortTopChgAck The value of the topology change acknowledgement flag in the
next configuration BPDU to be transmitted on the associated port. | scalar | Enumeration | .1.3.6.1.4.1.52.1.3.1.2.23 |
| bdgPortDesigRoot The unique bridge identifier of the bridge that is assumed to be
the root bridge on the network. | scalar | OctetString | .1.3.6.1.4.1.52.1.3.1.2.24 |
| bdgPortRuntPackets The number of packets received at the indicated bdgPort that were
less than the IEEE 802.3 minimum Ethernet frame size of 64 bytes. | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.52.1.3.1.2.25 |
| bdgPortFrFilt The number of frames received at the indicated port that were
filtered by the bridge. | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.52.1.3.1.2.27 |
| bdgPortType The IEEE specification the port meets, e.g. 802.3. | scalar | OctetString | .1.3.6.1.4.1.52.1.3.1.2.3 |
| bdgPortStatus The status in which the port is operating. The status messages
for Ports 1 and 2 are:
OFF - The port is off, due to a failed network interface
chip associated with th… | scalar | OctetString | .1.3.6.1.4.1.52.1.3.1.2.4 |
| bdgPortNetName The user-defined name assigned to a network segment connected to
the port. The default network name for Port 1 is LAN_1 and the
default network name for Port 2 is LAN_2. | scalar | OctetString | .1.3.6.1.4.1.52.1.3.1.2.5 |
| bdgPortFrRx The number of frames received at the specified port. | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.52.1.3.1.2.6 |
| bdgPortDisInb The total number of valid frames that were received at the port
but then discarded by the bridge in the forwarding process. | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.52.1.3.1.2.7 |
| bdgPortFwdOutb The number of frames forwarded successfully to the appropriate
port. | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.52.1.3.1.2.8 |
| bdgPortDisLOB The number of packets that were discarded by the bridge because
of a lack of buffer space to maintain the data. | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.52.1.3.1.2.9 |