ctTransSrSRLF
CTRON-TRANSLATION-MIB ·
.1.3.6.1.4.1.52.4.1.3.4.7.1.1.10
Object
column
mandatory
r/w
Integer32
The maximum size of the INFO field (LLC and
above) that this interface can send/receive. It does
not include any MAC level (framing) octets. The
value of this object is used by this device to
determine whether a modification of the
LargestFrame (LF) field of the Routing
Control field of the Routing Information Field is
necessary.
64 valid values are defined by the IEEE 802.5M SRT
Addendum: 516, 635, 754, 873, 993, 1112, 1231,
1350, 1470, 1542, 1615, 1688, 1761, 1833, 1906,
1979, 2052, 2345, 2638, 2932, 3225, 3518, 3812,
4105, 4399, 4865, 5331, 5798, 6264, 6730, 7197,
7663, 8130, 8539, 8949, 9358, 9768, 10178, 10587,
10997, 11407, 12199, 12992, 13785, 14578, 15370,
16163, 16956, 17749, 20730, 23711, 26693, 29674,
32655, 35637, 38618, 41600, 44591, 47583, 50575,
53567, 56559, 59551, and 65535.
Context
- MIB
- CTRON-TRANSLATION-MIB
- OID
.1.3.6.1.4.1.52.4.1.3.4.7.1.1.10- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- ctTransSrEntry
- Table
- ctTransSrTable
- Siblings
- 10
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ctTransSrPort mandatory The MIB-II interface number for which this entry
is administering source route configuration management. | column | Integer32 | .1.3.6.1.4.1.52.4.1.3.4.7.1.1.1 |
| ctTransSRAutoRingNumberDetect mandatory This object enables an interface to automatically detect
the source route ring number of the attached ring segment.
When enabled, the interface wil automatically each time at
ope… | column | Enumeration | .1.3.6.1.4.1.52.4.1.3.4.7.1.1.11 |
| ctTransSrIfMode mandatory This object indicates the types of frames (sr,tp or both)
supported by endstations attached to this interface.
This information is used by the device to determine
if sr/tp transla… | column | Enumeration | .1.3.6.1.4.1.52.4.1.3.4.7.1.1.2 |
| ctTransSrExpMode mandatory This object selects the type of explorer frame the SR or SRT
interface will use, if and when an explorer frame is required.
This object is only applicable when ctTransSrIfMode i… | column | Enumeration | .1.3.6.1.4.1.52.4.1.3.4.7.1.1.3 |
| ctTransSrIP mandatory This object determines how the sr/tp translation of IP frames
of type 'broadcast', 'destination unknown', or 'destination
known but IP not previously seen for this end station' … | column | Enumeration | .1.3.6.1.4.1.52.4.1.3.4.7.1.1.4 |
| ctTransSrIPX mandatory This object determines how the sr/tp translation of IPX frames
of type `broadcast`, `destination unknown`, or `destination
known but IPX not previously seen for this end station… | column | Enumeration | .1.3.6.1.4.1.52.4.1.3.4.7.1.1.5 |
| ctTransSrNetBIOS mandatory This object determines how the sr/tp translation of NetBIOS frames
of type `broadcast`, `destination unknown`, or `destination
known but NetBIOS not previously seen for this end… | column | Enumeration | .1.3.6.1.4.1.52.4.1.3.4.7.1.1.6 |
| ctTransSrSNA mandatory This object determines how the sr/tp translation of SNA frames
of type 'broadcast', 'destination unknown', or 'destination
known but SNA not previously seen for this end station… | column | Enumeration | .1.3.6.1.4.1.52.4.1.3.4.7.1.1.7 |
| ctTransSrOther mandatory This object determines how the sr/tp translation of all 'other
protocols' is handled. 'other protocols' includes any protocol not
mentioned above (i.e. IP,IPX,NetBIOS, or SNA) … | column | Enumeration | .1.3.6.1.4.1.52.4.1.3.4.7.1.1.8 |
| ctTransSRLocalSegment mandatory The segment (ring) number that uniquely identifies the
segment to which this interface is connected. Current
source routing protocols limit this value to the
range: 0 through 4095… | column | Integer32 | .1.3.6.1.4.1.52.4.1.3.4.7.1.1.9 |